[Fri Aug 31 00:40:42 2012] Detection parameters:
  Position = (478.8, 1014.0) = 3 9 38.88 -20 37 19.9
  Extent = 0.5" x 0.5", rotation angle = 126 degrees
  Source counts = 42.1 +/- 6.6
  Background counts = 0.9
  Rate = 0.0009 +/- 0.0001

[Fri Aug 31 00:40:43 2012] Off-axis axis estimate = 3.07'
[Fri Aug 31 00:41:50 2012] Using EEF radius (= 0.59 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 00:41:50 2012] Initial guess for spatial extent in simple fitting = 0.59"
[Fri Aug 31 00:41:50 2012] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.374
[Fri Aug 31 00:41:50 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 0.59"
[Fri Aug 31 00:41:51 2012] fullrun_ccd1_acisf10720_pi14-548_cl_pass0_src3.ximg exists
[Fri Aug 31 00:41:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10720_pi14-548_cl_pass0_src3.csv
[Fri Aug 31 00:41:51 2012] fullrun_ccd1_acisf10720_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Aug 31 00:41:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10720_pi14-548_cl_pass0_src3.csv
[Fri Aug 31 00:41:51 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10720_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10720_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 00:41:51 2012] fullrun_ccd1_acisf10720_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Aug 31 00:41:51 2012] fullrun_ccd1_acisf10720_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Aug 31 00:41:51 2012] Fit fullrun_ccd1_acisf10720_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Aug 31 00:42:07 2012] Spatial fit model total counts = 41.141500, observed total counts = 43.000000
[Fri Aug 31 00:42:07 2012] Offset between fit and detection position for source 6 = 0.679667 pixels
[Fri Aug 31 00:42:07 2012] 41.141500 total counts/ 0.000000 bgd. counts: snr = 150411834623.611633
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.679667 pixels
  Position = (479.3, 1014.5) = 3 9 38.88 -20 37 19.9
  Extent = 0.6 (0.5-0.6)", rotation angle = 0
  Source counts = 41.1 +/- 6.4
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0001
[Fri Aug 31 00:42:07 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 00:42:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 00:42:07 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 00:42:07 2012] Source does appear to be extended
[Fri Aug 31 00:42:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 00:42:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 31 00:42:37 2012] Initial guess for spatial extent in simple fitting = 0.57"
[Fri Aug 31 00:42:37 2012] source mask rpix=1.2, npix_max = 10, mask sum = 9, frac = 0.821
[Fri Aug 31 00:42:37 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 0.57"
[Fri Aug 31 00:42:37 2012] fullrun_ccd1_acisf10720_pi14-548_cl_pass1_src3.ximg exists
[Fri Aug 31 00:42:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10720_pi14-548_cl_pass1_src3.csv
[Fri Aug 31 00:42:38 2012] fullrun_ccd1_acisf10720_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Aug 31 00:42:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10720_pi14-548_cl_pass1_src3.csv
[Fri Aug 31 00:42:38 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10720_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10720_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 00:42:38 2012] fullrun_ccd1_acisf10720_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Aug 31 00:42:38 2012] fullrun_ccd1_acisf10720_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Aug 31 00:42:38 2012] Fit fullrun_ccd1_acisf10720_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Aug 31 00:42:52 2012] Spatial fit model total counts = 42.627000, observed total counts = 43.000000
[Fri Aug 31 00:42:52 2012] Offset between fit and detection position for source 6 = 0.032489 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.032489 pixels
  Position = (479.3, 1014.5) = 3 9 38.88 -20 37 19.9
  Extent = 0.6 (0.5-0.6)", rotation angle = 0
  Source counts = 42.6 +/- 6.5
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0001
[Fri Aug 31 00:42:52 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 00:42:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 00:42:52 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 00:42:52 2012] Source does appear to be extended
[Fri Aug 31 00:42:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 00:44:35 2012] Not overwriting source region fullrun_ccd1_acisf10720_pi14-548_pass1_cl_src6_src.reg
[Fri Aug 31 00:44:35 2012] Extracting stamp from image fullrun_ccd1_acisf10720_pi14-548_cl_sm2.00.img.gz, (454, 989) - (505, 1040)
[Fri Aug 31 00:44:35 2012] Writing fullrun_ccd1_acisf10720_pi14-548_pass1_cl_src6.gif
[Fri Aug 31 00:44:43 2012] ../../acisf10720/products/events/fullrun_ccd1_acisf10720_pi14-548_pass1_cl_src6_src.evt and ../../acisf10720/products/events/fullrun_ccd1_acisf10720_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Fri Aug 31 00:44:43 2012] Size of ../../acisf10720/products/events/fullrun_ccd1_acisf10720_pi14-548_pass1_cl_src6_src.evt.gz[events] = 43 counts
[Fri Aug 31 00:44:43 2012] Mean chipx,y = (126.58, 710.72)
[Fri Aug 31 00:44:43 2012] Mean tdetx,y = (4421.28, 4233.58)
[Fri Aug 31 00:44:43 2012] chipx,y range = (108.00-142.00, 693.00-728.00)
[Fri Aug 31 00:44:43 2012] Size of ../../acisf10720/products/events/fullrun_ccd1_acisf10720_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 6 counts
[Fri Aug 31 00:44:43 2012] ../../acisf10720/products/images/fullrun_ccd1_acisf10720_pi14-548_pass1_cl_src6_src.img and ../../acisf10720/products/images/fullrun_ccd1_acisf10720_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Fri Aug 31 00:44:43 2012] ../../acisf10720/products/spectra/fullrun_ccd1_acisf10720_pi14-548_pass1_cl_src6_src.pi and ../../acisf10720/products/spectra/fullrun_ccd1_acisf10720_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Fri Aug 31 00:44:43 2012] Not generating rmf since there are only 42 counts
[Fri Aug 31 00:44:46 2012] ../../acisf10720/products/lightcurves/fullrun_ccd1_acisf10720_pi14-548_pass1_cl_src6_src.lc and ../../acisf10720/products/lightcurves/fullrun_ccd1_acisf10720_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Fri Aug 31 00:45:40 2012] 200.53
[Fri Aug 31 00:49:04 2012] Updating aperture counts using extracted products
[Fri Aug 31 00:49:04 2012] Error reading totcts from fullrun_ccd1_acisf10720_pi14-548_pass1_cl_src6_src.pi.gz
[Fri Aug 31 00:49:04 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 31 00:49:04 2012] Using photon index=1.80, rate=0.000907, arf fullrun_ccd1_acisf10720_pi14-548_pass1_cl_src6.arf
[Fri Aug 31 00:49:04 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Aug 31 00:49:04 2012] Updating source flux to 1.1e-14
[Fri Aug 31 00:49:17 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting