[Wed Jul 31 05:52:44 2013] Detection parameters:
  Position = (963.1, 960.8) = 0 42 52.53 41 15 40.0
  Extent = 0.5" x 0.5", rotation angle = 120 degrees
  Source counts = 15.6 +/- 4.0
  Background counts = 0.4
  Rate = 0.004 +/- 0.001

[Wed Jul 31 05:52:46 2013] Off-axis axis estimate = 1.27'
[Wed Jul 31 05:53:40 2013] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Wed Jul 31 05:53:40 2013] Initial guess for spatial extent in simple fitting = 0.38"
[Wed Jul 31 05:53:40 2013] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.610
[Wed Jul 31 05:53:40 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 0.38"
[Wed Jul 31 05:53:41 2013] fullrun_ccd2_acisf10719_pi14-548_cl_pass0_src12.ximg exists
[Wed Jul 31 05:53:41 2013] Warning: total counts is not > 0
[Wed Jul 31 05:53:41 2013] fullrun_ccd2_acisf10719_pi14-548_cl_pass0_src12_1.ximg exists
[Wed Jul 31 05:53:41 2013] Warning: total counts is not > 0
[Wed Jul 31 05:53:41 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10719_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10719_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 31 05:53:41 2013] fullrun_ccd2_acisf10719_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Wed Jul 31 05:53:41 2013] Warning: total counts is not > 0
[Wed Jul 31 05:53:41 2013] fullrun_ccd2_acisf10719_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Wed Jul 31 05:53:41 2013] Warning: total counts is not > 0
[Wed Jul 31 05:53:41 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10719_pi14-548_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10719_pi14-548_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes