[Wed Jul 31 05:52:41 2013] Detection parameters:
  Position = (29.7, 256.3) = 0 42 39.99 41 15 47.6
  Extent = 0.5" x 0.5", rotation angle = 166 degrees
  Source counts = 104.5 +/- 10.4
  Background counts = 3.5
  Rate = 0.03 +/- 0.003

[Wed Jul 31 05:52:43 2013] Off-axis axis estimate = 1.09'
[Wed Jul 31 05:53:39 2013] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Wed Jul 31 05:53:39 2013] Initial guess for spatial extent in simple fitting = 0.38"
[Wed Jul 31 05:53:39 2013] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.388
[Wed Jul 31 05:53:39 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 0.38"
[Wed Jul 31 05:53:40 2013] fullrun_ccd1_acisf10719_pi14-548_cl_pass0_src7.ximg exists
[Wed Jul 31 05:53:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10719_pi14-548_cl_pass0_src7.csv
[Wed Jul 31 05:53:40 2013] fullrun_ccd1_acisf10719_pi14-548_cl_pass0_src7_1.ximg exists
[Wed Jul 31 05:53:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10719_pi14-548_cl_pass0_src7.csv
[Wed Jul 31 05:53:40 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10719_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10719_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 31 05:53:40 2013] fullrun_ccd1_acisf10719_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Wed Jul 31 05:53:40 2013] fullrun_ccd1_acisf10719_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Jul 31 05:53:40 2013] Fit fullrun_ccd1_acisf10719_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly