[Wed Jul 31 05:52:40 2013] Detection parameters:
  Position = (65.0, 552.9) = 0 42 45.95 41 10 37.0
  Extent = 0.7" x 0.5", rotation angle = 113 degrees
  Source counts = 38.4 +/- 6.2
  Background counts = 0.6
  Rate = 0.009 +/- 0.002

[Wed Jul 31 05:52:41 2013] Off-axis axis estimate = 5.13'
[Wed Jul 31 05:53:36 2013] Using EEF radius (= 1.23 ")to estimate initial spatial extent for simple fitting
[Wed Jul 31 05:53:36 2013] Initial guess for spatial extent in simple fitting = 1.23"
[Wed Jul 31 05:53:36 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.999
[Wed Jul 31 05:53:36 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 1.23"
[Wed Jul 31 05:53:37 2013] fullrun_ccd0_acisf10719_pi14-548_cl_pass0_src5.ximg exists
[Wed Jul 31 05:53:37 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf10719_pi14-548_cl_pass0_src5.csv
[Wed Jul 31 05:53:37 2013] fullrun_ccd0_acisf10719_pi14-548_cl_pass0_src5_1.ximg exists
[Wed Jul 31 05:53:37 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf10719_pi14-548_cl_pass0_src5.csv
[Wed Jul 31 05:53:37 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10719_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10719_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 31 05:53:38 2013] fullrun_ccd0_acisf10719_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Wed Jul 31 05:53:38 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf10719_pi14-548_cl_pass0_tfrozen_src5.csv
[Wed Jul 31 05:53:38 2013] fullrun_ccd0_acisf10719_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Jul 31 05:53:38 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf10719_pi14-548_cl_pass0_tfrozen_src5.csv
[Wed Jul 31 05:53:38 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10719_pi14-548_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10719_pi14-548_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes