[Wed Jul 31 05:52:41 2013] Detection parameters:
  Position = (212.1, 1023.1) = 0 42 39.53 41 14 28.3
  Extent = 0.5" x 0.5", rotation angle = 50 degrees
  Source counts = 19.7 +/- 4.5
  Background counts = 0.3
  Rate = 0.005 +/- 0.001

[Wed Jul 31 05:52:41 2013] Off-axis axis estimate = 1.73'
[Wed Jul 31 05:53:36 2013] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Wed Jul 31 05:53:36 2013] Initial guess for spatial extent in simple fitting = 0.41"
[Wed Jul 31 05:53:36 2013] source mask rpix=0.8, npix_max = 7, mask sum = 4, frac = 0.568
[Wed Jul 31 05:53:36 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 0.41"
[Wed Jul 31 05:53:38 2013] fullrun_ccd0_acisf10719_pi14-548_cl_pass0_src11.ximg exists
[Wed Jul 31 05:53:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10719_pi14-548_cl_pass0_src11.csv
[Wed Jul 31 05:53:38 2013] fullrun_ccd0_acisf10719_pi14-548_cl_pass0_src11_1.ximg exists
[Wed Jul 31 05:53:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10719_pi14-548_cl_pass0_src11.csv
[Wed Jul 31 05:53:38 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10719_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10719_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 31 05:53:39 2013] fullrun_ccd0_acisf10719_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Wed Jul 31 05:53:39 2013] fullrun_ccd0_acisf10719_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Jul 31 05:53:39 2013] Fit fullrun_ccd0_acisf10719_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly