[Wed Jul 31 05:52:40 2013] Detection parameters:
  Position = (604.5, 913.5) = 0 42 22.42 41 13 34.3
  Extent = 1.0" x 0.5", rotation angle = 153 degrees
  Source counts = 42.5 +/- 6.6
  Background counts = 0.5
  Rate = 0.01 +/- 0.002

[Wed Jul 31 05:52:41 2013] Off-axis axis estimate = 4.90'
[Wed Jul 31 05:53:36 2013] Using EEF radius (= 1.14 ")to estimate initial spatial extent for simple fitting
[Wed Jul 31 05:53:36 2013] Initial guess for spatial extent in simple fitting = 1.14"
[Wed Jul 31 05:53:36 2013] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.788
[Wed Jul 31 05:53:36 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 1.14"
[Wed Jul 31 05:53:38 2013] fullrun_ccd0_acisf10719_pi14-548_cl_pass0_src9.ximg exists
[Wed Jul 31 05:53:38 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf10719_pi14-548_cl_pass0_src9.csv
[Wed Jul 31 05:53:38 2013] fullrun_ccd0_acisf10719_pi14-548_cl_pass0_src9_1.ximg exists
[Wed Jul 31 05:53:38 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf10719_pi14-548_cl_pass0_src9.csv
[Wed Jul 31 05:53:38 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10719_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10719_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 31 05:53:38 2013] fullrun_ccd0_acisf10719_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Wed Jul 31 05:53:38 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf10719_pi14-548_cl_pass0_tfrozen_src9.csv
[Wed Jul 31 05:53:38 2013] fullrun_ccd0_acisf10719_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Jul 31 05:53:38 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf10719_pi14-548_cl_pass0_tfrozen_src9.csv
[Wed Jul 31 05:53:38 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10719_pi14-548_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10719_pi14-548_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes