[Sat Feb 25 22:46:16 2012] Detection parameters:
  Position = (798.1, 911.3) = 0 42 11.78 41 10 48.9
  Extent = 1.3" x 0.9", rotation angle = 37 degrees
  Source counts = 27.2 +/- 5.3
  Background counts = 0.8
  Rate = 0.007 +/- 0.001

[Sat Feb 25 22:46:17 2012] Off-axis axis estimate = 6.11'
[Sat Feb 25 23:07:56 2012] Using EEF radius (= 1.68 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 23:07:56 2012] Initial guess for spatial extent in simple fitting = 1.68"
[Sat Feb 25 23:07:56 2012] source mask rpix=3.4, npix_max = 61, mask sum = 64, frac = 1.039
[Sat Feb 25 23:07:56 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 1.68"
[Sat Feb 25 23:19:59 2012] fullrun_ccd3_acisf10718_pi14-548_cl_pass0_src6.ximg exists
[Sat Feb 25 23:19:59 2012] Warning: total counts is not > 0
[Sat Feb 25 23:19:59 2012] fullrun_ccd3_acisf10718_pi14-548_cl_pass0_src6_1.ximg exists
[Sat Feb 25 23:19:59 2012] Warning: total counts is not > 0
[Sat Feb 25 23:19:59 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10718_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10718_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 23:19:59 2012] fullrun_ccd3_acisf10718_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Sat Feb 25 23:19:59 2012] Warning: total counts is not > 0
[Sat Feb 25 23:19:59 2012] fullrun_ccd3_acisf10718_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Feb 25 23:19:59 2012] Warning: total counts is not > 0
[Sat Feb 25 23:19:59 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10718_pi14-548_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10718_pi14-548_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 23:41:31 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 19.841833 pixels away
[Sat Feb 25 23:41:31 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 23:41:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 23:41:31 2012] Assessing source extent using major
[Sat Feb 25 23:41:31 2012] Source does appear to be extended
[Sat Feb 25 23:41:31 2012] Computing asymmetry using major and minor axis, asym = 1.42
[Sun Feb 26 00:06:38 2012] Using EEF radius (= 1.68 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 00:06:38 2012] Initial guess for spatial extent in simple fitting = 1.68"
[Sun Feb 26 00:06:38 2012] source mask rpix=3.4, npix_max = 61, mask sum = 64, frac = 1.039
[Sun Feb 26 00:06:38 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 1.68"
[Sun Feb 26 00:18:56 2012] fullrun_ccd3_acisf10718_pi14-548_cl_pass1_src6.ximg exists
[Sun Feb 26 00:18:56 2012] Warning: total counts is not > 0
[Sun Feb 26 00:18:56 2012] fullrun_ccd3_acisf10718_pi14-548_cl_pass1_src6_1.ximg exists
[Sun Feb 26 00:18:56 2012] Warning: total counts is not > 0
[Sun Feb 26 00:18:56 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10718_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10718_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 00:18:56 2012] fullrun_ccd3_acisf10718_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Sun Feb 26 00:18:56 2012] Warning: total counts is not > 0
[Sun Feb 26 00:18:56 2012] fullrun_ccd3_acisf10718_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Feb 26 00:18:56 2012] Warning: total counts is not > 0
[Sun Feb 26 00:18:56 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10718_pi14-548_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10718_pi14-548_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 00:38:52 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 14.949668 pixels away
[Sun Feb 26 00:38:52 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 00:38:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 00:38:52 2012] Assessing source extent using major
[Sun Feb 26 00:38:52 2012] Source does appear to be extended
[Sun Feb 26 00:38:52 2012] Computing asymmetry using major and minor axis, asym = 1.42
[Sun Feb 26 00:42:38 2012] Writing source region out to fullrun_ccd3_acisf10718_pi14-548_pass1_cl_src9_src.reg
[Sun Feb 26 00:42:38 2012] Extracting stamp from image fullrun_ccd3_acisf10718_pi14-548_cl_sm2.00.img.gz, (741, 854) - (855, 969)
[Sun Feb 26 00:42:38 2012] Writing fullrun_ccd3_acisf10718_pi14-548_pass1_cl_src9.gif
[Sun Feb 26 00:43:20 2012] ../../acisf10718/products/events/fullrun_ccd3_acisf10718_pi14-548_pass1_cl_src9_src.evt.gz[events] does not have any counts, not extracting products.
[Sun Feb 26 00:44:01 2012] No arf file found
[Sun Feb 26 00:44:21 2012] Updating aperture counts using extracted products
[Sun Feb 26 00:44:21 2012] Error reading totcts from fullrun_ccd3_acisf10718_pi14-548_pass1_cl_src9_src.pi
[Sun Feb 26 00:44:21 2012] No arf file for this source, not re-computing flux
[Sun Feb 26 00:44:27 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Feb 26 00:44:28 2012] acisf10718/analysis//spectral/fullrun_ccd3_acisf10718_pi14-548_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete