[Sat Oct 15 10:31:00 2011] Detection parameters:
  Position = (579.3, 817.2) = 11 1 15.30 -60 22 52.7
  Extent = 0.6" x 0.5", rotation angle = 152 degrees
  Source counts = 24.7 +/- 5.0
  Background counts = 0.3
  Rate = 0.002 +/- 0.0005

[Sat Oct 15 10:31:01 2011] Off-axis axis estimate = 4.48'
[Sat Oct 15 10:31:45 2011] Using EEF radius (= 0.98 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 10:31:45 2011] Initial guess for spatial extent in simple fitting = 0.98"
[Sat Oct 15 10:31:45 2011] source mask rpix=2.0, npix_max = 25, mask sum = 22, frac = 0.880
[Sat Oct 15 10:31:45 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 0.98"
[Sat Oct 15 10:31:45 2011] fullrun_ccd2_acisf10711_pi14-548_cl_pass0_src2.ximg exists
[Sat Oct 15 10:31:45 2011] fullrun_ccd2_acisf10711_pi14-548_cl_pass0_src2_1.ximg exists
[Sat Oct 15 10:31:45 2011] Fit fullrun_ccd2_acisf10711_pi14-548_cl_pass0_src2 appears to have run properly
[Sat Oct 15 10:31:45 2011] fullrun_ccd2_acisf10711_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Sat Oct 15 10:31:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10711_pi14-548_cl_pass0_tfrozen_src2.csv
[Sat Oct 15 10:31:45 2011] fullrun_ccd2_acisf10711_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Oct 15 10:31:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10711_pi14-548_cl_pass0_tfrozen_src2.csv
[Sat Oct 15 10:31:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10711_pi14-548_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10711_pi14-548_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 10:31:51 2011] Spatial fit model total counts = 25.024300, observed total counts = 29.000000
[Sat Oct 15 10:31:51 2011] Offset between fit and detection position for source 1 = 0.585427 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.585427 pixels
  Position = (579.8, 817.6) = 11 1 15.30 -60 22 52.8
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source counts = 25.3 +/- 5.0
  Background counts = 0.0
  Rate = 0.003 +/- 0.0005
[Sat Oct 15 10:31:51 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 10:31:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 10:31:51 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 10:31:51 2011] Source does appear to be extended
[Sat Oct 15 10:31:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 10:32:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 10:32:07 2011] Initial guess for spatial extent in simple fitting = 0.81"
[Sat Oct 15 10:32:07 2011] source mask rpix=1.6, npix_max = 18, mask sum = 19, frac = 1.035
[Sat Oct 15 10:32:07 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.81"
[Sat Oct 15 10:32:07 2011] fullrun_ccd2_acisf10711_pi14-548_cl_pass1_src2.ximg exists
[Sat Oct 15 10:32:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10711_pi14-548_cl_pass1_src2.csv
[Sat Oct 15 10:32:07 2011] fullrun_ccd2_acisf10711_pi14-548_cl_pass1_src2_1.ximg exists
[Sat Oct 15 10:32:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10711_pi14-548_cl_pass1_src2.csv
[Sat Oct 15 10:32:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10711_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10711_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 10:32:07 2011] fullrun_ccd2_acisf10711_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Sat Oct 15 10:32:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10711_pi14-548_cl_pass1_tfrozen_src2.csv
[Sat Oct 15 10:32:07 2011] fullrun_ccd2_acisf10711_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Oct 15 10:32:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10711_pi14-548_cl_pass1_tfrozen_src2.csv
[Sat Oct 15 10:32:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10711_pi14-548_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10711_pi14-548_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 10:32:16 2011] Spatial fit model total counts = 25.914400, observed total counts = 29.000000
[Sat Oct 15 10:32:16 2011] Offset between fit and detection position for source 1 = 0.025730 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.025730 pixels
  Position = (579.8, 817.6) = 11 1 15.30 -60 22 52.8
  Extent = 0.8 (0.7-0.9)", rotation angle = 0
  Source counts = 26.1 +/- 5.1
  Background counts = 0.0
  Rate = 0.003 +/- 0.0005
[Sat Oct 15 10:32:16 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 10:32:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 10:32:16 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 10:32:16 2011] Source does appear to be extended
[Sat Oct 15 10:32:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 10:33:23 2011] Not overwriting source region fullrun_ccd2_acisf10711_pi14-548_pass1_cl_src1_src.reg
[Sat Oct 15 10:33:23 2011] Extracting stamp from image fullrun_ccd2_acisf10711_pi14-548_cl_sm2.00.img.gz, (544, 782) - (616, 853)
[Sat Oct 15 10:33:23 2011] Writing fullrun_ccd2_acisf10711_pi14-548_pass1_cl_src1.gif
[Sat Oct 15 10:33:27 2011] ../../acisf10711/products/events/fullrun_ccd2_acisf10711_pi14-548_pass1_cl_src1_src.evt and ../../acisf10711/products/events/fullrun_ccd2_acisf10711_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Oct 15 10:33:27 2011] Size of ../../acisf10711/products/events/fullrun_ccd2_acisf10711_pi14-548_pass1_cl_src1_src.evt.gz[events] = 28 counts
[Sat Oct 15 10:33:27 2011] Mean chipx,y = (503.04, 699.04)
[Sat Oct 15 10:33:27 2011] Mean tdetx,y = (3760.04, 3582.96)
[Sat Oct 15 10:33:27 2011] chipx,y range = (486.00-523.00, 685.00-720.00)
[Sat Oct 15 10:33:27 2011] Size of ../../acisf10711/products/events/fullrun_ccd2_acisf10711_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 3 counts
[Sat Oct 15 10:33:27 2011] ../../acisf10711/products/images/fullrun_ccd2_acisf10711_pi14-548_pass1_cl_src1_src.img and ../../acisf10711/products/images/fullrun_ccd2_acisf10711_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Oct 15 10:33:27 2011] ../../acisf10711/products/spectra/fullrun_ccd2_acisf10711_pi14-548_pass1_cl_src1_src.pi and ../../acisf10711/products/spectra/fullrun_ccd2_acisf10711_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sat Oct 15 10:33:27 2011] Not generating rmf since there are only 26 counts
[Sat Oct 15 10:33:30 2011] ../../acisf10711/products/lightcurves/fullrun_ccd2_acisf10711_pi14-548_pass1_cl_src1_src.lc and ../../acisf10711/products/lightcurves/fullrun_ccd2_acisf10711_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Oct 15 10:33:51 2011] 170.49
[Sat Oct 15 10:34:32 2011] Updating aperture counts using extracted products
[Sat Oct 15 10:34:32 2011] Error reading totcts from fullrun_ccd2_acisf10711_pi14-548_pass1_cl_src1_src.pi.gz
[Sat Oct 15 10:34:32 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 10:34:32 2011] Using photon index=1.80, rate=0.00263, arf fullrun_ccd2_acisf10711_pi14-548_pass1_cl_src1.arf
[Sat Oct 15 10:34:32 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 10:34:32 2011] Updating source flux to 4.9e-14
[Sat Oct 15 10:34:41 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct 15 10:34:42 2011] acisf10711/analysis//spectral/fullrun_ccd2_acisf10711_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete