[Fri Oct  7 21:31:13 2011] Detection parameters:
  Position = (269.2, 779.1) = 9 55 48.59 18 12 24.0
  Extent = 0.9" x 0.6", rotation angle = 58 degrees
  Source counts = 33.0 +/- 5.9
  Background counts = 2.0
  Rate = 0.001 +/- 0.0003

[Fri Oct  7 21:31:14 2011] Off-axis axis estimate = 5.16'
[Fri Oct  7 21:31:57 2011] Using EEF radius (= 1.25 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 21:31:57 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 21:31:57 2011] Initial guess for spatial extent in simple fitting = 1.25"
[Fri Oct  7 21:31:57 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.979
[Fri Oct  7 21:31:57 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 1.25"
[Fri Oct  7 21:31:57 2011] fullrun_ccd7_acisf10709_pi14-548_cl_pass0_src4.ximg exists
[Fri Oct  7 21:31:57 2011] fullrun_ccd7_acisf10709_pi14-548_cl_pass0_src4_1.ximg exists
[Fri Oct  7 21:31:57 2011] Fit fullrun_ccd7_acisf10709_pi14-548_cl_pass0_src4 appears to have run properly
[Fri Oct  7 21:31:58 2011] fullrun_ccd7_acisf10709_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Fri Oct  7 21:31:58 2011] fullrun_ccd7_acisf10709_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Oct  7 21:31:58 2011] Fit fullrun_ccd7_acisf10709_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Oct  7 21:32:05 2011] Spatial fit model total counts = 45.975300, observed total counts = 49.000000
[Fri Oct  7 21:32:05 2011] Offset between fit and detection position for source 3 = 0.251860 pixels
[Fri Oct  7 21:32:05 2011] 49.393600 total counts/ 20.094800 bgd. counts: snr = 6.535939
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.251860 pixels
  Position = (269.5, 779.1) = 9 55 48.60 18 12 23.8
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 29.3 +/- 7.0
  Background counts = 20.1
  Rate = 0.001 +/- 0.0003
[Fri Oct  7 21:32:05 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 21:32:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 21:32:05 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 21:32:05 2011] Source does appear to be extended
[Fri Oct  7 21:32:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 21:32:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 21:32:23 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 21:32:23 2011] Initial guess for spatial extent in simple fitting = 0.90"
[Fri Oct  7 21:32:23 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.925
[Fri Oct  7 21:32:23 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 0.90"
[Fri Oct  7 21:32:23 2011] fullrun_ccd7_acisf10709_pi14-548_cl_pass1_src4.ximg exists
[Fri Oct  7 21:32:23 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf10709_pi14-548_cl_pass1_src4.csv
[Fri Oct  7 21:32:23 2011] fullrun_ccd7_acisf10709_pi14-548_cl_pass1_src4_1.ximg exists
[Fri Oct  7 21:32:23 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf10709_pi14-548_cl_pass1_src4.csv
[Fri Oct  7 21:32:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10709_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10709_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 21:32:23 2011] fullrun_ccd7_acisf10709_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Fri Oct  7 21:32:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10709_pi14-548_cl_pass1_tfrozen_src4.csv
[Fri Oct  7 21:32:23 2011] fullrun_ccd7_acisf10709_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Oct  7 21:32:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10709_pi14-548_cl_pass1_tfrozen_src4.csv
[Fri Oct  7 21:32:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10709_pi14-548_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10709_pi14-548_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 21:32:29 2011] Warning, spatial fit 4 centroid is now closest to src. 14
[Fri Oct  7 21:32:29 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 21:32:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 21:32:29 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 21:32:29 2011] Source does appear to be extended
[Fri Oct  7 21:32:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 21:33:56 2011] Not overwriting source region fullrun_ccd7_acisf10709_pi14-548_pass1_cl_src3_src.reg
[Fri Oct  7 21:33:56 2011] Extracting stamp from image fullrun_ccd7_acisf10709_pi14-548_cl_sm2.00.img.gz, (228, 738) - (311, 820)
[Fri Oct  7 21:33:56 2011] Writing fullrun_ccd7_acisf10709_pi14-548_pass1_cl_src3.gif
[Fri Oct  7 21:34:05 2011] ../../acisf10709/products/events/fullrun_ccd7_acisf10709_pi14-548_pass1_cl_src3_src.evt and ../../acisf10709/products/events/fullrun_ccd7_acisf10709_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Fri Oct  7 21:34:05 2011] Size of ../../acisf10709/products/events/fullrun_ccd7_acisf10709_pi14-548_pass1_cl_src3_src.evt.gz[events] = 40 counts
[Fri Oct  7 21:34:05 2011] Mean chipx,y = (746.15, 200.75)
[Fri Oct  7 21:34:05 2011] Mean tdetx,y = (4663.15, 1902.75)
[Fri Oct  7 21:34:05 2011] chipx,y range = (730.00-766.00, 185.00-219.00)
[Fri Oct  7 21:34:05 2011] Size of ../../acisf10709/products/events/fullrun_ccd7_acisf10709_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 36 counts
[Fri Oct  7 21:34:05 2011] ../../acisf10709/products/images/fullrun_ccd7_acisf10709_pi14-548_pass1_cl_src3_src.img and ../../acisf10709/products/images/fullrun_ccd7_acisf10709_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Fri Oct  7 21:34:05 2011] ../../acisf10709/products/spectra/fullrun_ccd7_acisf10709_pi14-548_pass1_cl_src3_src.pi and ../../acisf10709/products/spectra/fullrun_ccd7_acisf10709_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Fri Oct  7 21:34:05 2011] Not generating rmf since there are only 29 counts
[Fri Oct  7 21:34:07 2011] ../../acisf10709/products/lightcurves/fullrun_ccd7_acisf10709_pi14-548_pass1_cl_src3_src.lc and ../../acisf10709/products/lightcurves/fullrun_ccd7_acisf10709_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Fri Oct  7 21:35:00 2011] 217.991
[Fri Oct  7 21:35:07 2011] Updating aperture counts using extracted products
[Fri Oct  7 21:35:07 2011] Error reading totcts from fullrun_ccd7_acisf10709_pi14-548_pass1_cl_src3_src.pi.gz
[Fri Oct  7 21:35:07 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 21:35:07 2011] Using photon index=1.80, rate=0.00129, arf fullrun_ccd7_acisf10709_pi14-548_pass1_cl_src3.arf
[Fri Oct  7 21:35:07 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 21:35:07 2011] Updating source flux to 1e-14
[Fri Oct  7 21:35:13 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct  7 21:35:14 2011] acisf10709/analysis//spectral/fullrun_ccd7_acisf10709_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete