[Sun Oct  9 01:30:04 2011] Detection parameters:
  Position = (1060.4, 971.5) = 4 23 15.08 -25 14 19.0
  Extent = 1.7" x 1.3", rotation angle = 11 degrees
  Source counts = 22.7 +/- 5.2
  Background counts = 4.3
  Rate = 0.0007 +/- 0.0002

[Sun Oct  9 01:30:04 2011] Off-axis axis estimate = 8.26'
[Sun Oct  9 01:31:09 2011] Using EEF radius (= 3.01 ")to estimate initial spatial extent for simple fitting
[Sun Oct  9 01:31:09 2011] Initial guess for spatial extent in simple fitting = 3.01"
[Sun Oct  9 01:31:09 2011] source mask rpix=6.1, npix_max = 175, mask sum = 169, frac = 0.963
[Sun Oct  9 01:31:09 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 3.01"
[Sun Oct  9 01:31:10 2011] fullrun_ccd3_acisf10705_pi14-548_cl_pass0_src3.ximg exists
[Sun Oct  9 01:31:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10705_pi14-548_cl_pass0_src3.csv
[Sun Oct  9 01:31:10 2011] fullrun_ccd3_acisf10705_pi14-548_cl_pass0_src3_1.ximg exists
[Sun Oct  9 01:31:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10705_pi14-548_cl_pass0_src3.csv
[Sun Oct  9 01:31:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10705_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10705_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  9 01:31:10 2011] fullrun_ccd3_acisf10705_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sun Oct  9 01:31:10 2011] fullrun_ccd3_acisf10705_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Oct  9 01:31:10 2011] Fit fullrun_ccd3_acisf10705_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Oct  9 01:31:18 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 33.967859 pixels away
[Sun Oct  9 01:31:18 2011] Vigneting correction estimate = 1.000000
[Sun Oct  9 01:31:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  9 01:31:18 2011] Assessing source extent using major
[Sun Oct  9 01:31:18 2011] Source does appear to be extended
[Sun Oct  9 01:31:18 2011] Computing asymmetry using major and minor axis, asym = 1.31
[Sun Oct  9 01:31:42 2011] Using EEF radius (= 3.01 ")to estimate initial spatial extent for simple fitting
[Sun Oct  9 01:31:42 2011] Initial guess for spatial extent in simple fitting = 3.01"
[Sun Oct  9 01:31:42 2011] source mask rpix=6.1, npix_max = 175, mask sum = 169, frac = 0.963
[Sun Oct  9 01:31:42 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 3.01"
[Sun Oct  9 01:31:42 2011] fullrun_ccd3_acisf10705_pi14-548_cl_pass1_src3.ximg exists
[Sun Oct  9 01:31:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10705_pi14-548_cl_pass1_src3.csv
[Sun Oct  9 01:31:42 2011] fullrun_ccd3_acisf10705_pi14-548_cl_pass1_src3_1.ximg exists
[Sun Oct  9 01:31:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10705_pi14-548_cl_pass1_src3.csv
[Sun Oct  9 01:31:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10705_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10705_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  9 01:31:42 2011] fullrun_ccd3_acisf10705_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sun Oct  9 01:31:42 2011] fullrun_ccd3_acisf10705_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Oct  9 01:31:42 2011] Fit fullrun_ccd3_acisf10705_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Oct  9 01:31:55 2011] Spatial fit model total counts = 44.908400, observed total counts = 45.000000
[Sun Oct  9 01:31:55 2011] Offset between fit and detection position for source 4 = 1.403669 pixels
[Sun Oct  9 01:31:55 2011] 44.900900 total counts/ 26.238800 bgd. counts: snr = 3.643246
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.403669 pixels
  Position = (1061.6, 972.3) = 4 23 15.05 -25 14 18.9
  Extent = 1.4 (1.0-2.1)", rotation angle = 0
  Source counts = 18.7 +/- 6.7
  Background counts = 26.2
  Rate = 0.0006 +/- 0.0002
[Sun Oct  9 01:31:55 2011] Vigneting correction estimate = 1.000000
[Sun Oct  9 01:31:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  9 01:31:55 2011] Assessing source extent using major axis lower bound
[Sun Oct  9 01:31:55 2011] Source does appear to be extended
[Sun Oct  9 01:31:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  9 01:32:18 2011] Not overwriting source region fullrun_ccd3_acisf10705_pi14-548_pass1_cl_src4_src.reg
[Sun Oct  9 01:32:18 2011] Extracting stamp from image fullrun_ccd3_acisf10705_pi14-548_cl_sm2.00.img.gz, (998, 909) - (1125, 1036)
[Sun Oct  9 01:32:18 2011] Writing fullrun_ccd3_acisf10705_pi14-548_pass1_cl_src4.gif
[Sun Oct  9 01:32:26 2011] ../../acisf10705/products/events/fullrun_ccd3_acisf10705_pi14-548_pass1_cl_src4_src.evt and ../../acisf10705/products/events/fullrun_ccd3_acisf10705_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Sun Oct  9 01:32:26 2011] Size of ../../acisf10705/products/events/fullrun_ccd3_acisf10705_pi14-548_pass1_cl_src4_src.evt.gz[events] = 27 counts
[Sun Oct  9 01:32:26 2011] Mean chipx,y = (46.15, 572.59)
[Sun Oct  9 01:32:26 2011] Mean tdetx,y = (4559.41, 3107.15)
[Sun Oct  9 01:32:26 2011] chipx,y range = (27.00-71.00, 546.00-592.00)
[Sun Oct  9 01:32:26 2011] Size of ../../acisf10705/products/events/fullrun_ccd3_acisf10705_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 49 counts
[Sun Oct  9 01:32:26 2011] ../../acisf10705/products/images/fullrun_ccd3_acisf10705_pi14-548_pass1_cl_src4_src.img and ../../acisf10705/products/images/fullrun_ccd3_acisf10705_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Sun Oct  9 01:32:26 2011] ../../acisf10705/products/spectra/fullrun_ccd3_acisf10705_pi14-548_pass1_cl_src4_src.pi and ../../acisf10705/products/spectra/fullrun_ccd3_acisf10705_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Sun Oct  9 01:32:26 2011] Not generating rmf since there are only 18 counts
[Sun Oct  9 01:32:30 2011] ../../acisf10705/products/lightcurves/fullrun_ccd3_acisf10705_pi14-548_pass1_cl_src4_src.lc and ../../acisf10705/products/lightcurves/fullrun_ccd3_acisf10705_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Sun Oct  9 01:32:40 2011] 172.589
[Sun Oct  9 01:34:30 2011] Updating aperture counts using extracted products
[Sun Oct  9 01:34:30 2011] Error reading totcts from fullrun_ccd3_acisf10705_pi14-548_pass1_cl_src4_src.pi.gz
[Sun Oct  9 01:34:30 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct  9 01:34:30 2011] Using photon index=1.80, rate=0.000608, arf fullrun_ccd3_acisf10705_pi14-548_pass1_cl_src4.arf
[Sun Oct  9 01:34:30 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct  9 01:34:30 2011] Updating source flux to 8.3e-15
[Sun Oct  9 01:34:37 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct  9 01:34:38 2011] acisf10705/analysis//spectral/fullrun_ccd3_acisf10705_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete