[Wed Oct  5 21:22:33 2011] Detection parameters:
  Position = (504.2, 349.1) = 16 47 19.39 -44 35 45.3
  Extent = 0.7" x 0.5", rotation angle = 130 degrees
  Source counts = 16.8 +/- 4.4
  Background counts = 2.2
  Rate = 0.0002 +/- 6e-05

[Wed Oct  5 21:22:36 2011] Off-axis axis estimate = 4.22'
[Wed Oct  5 21:24:12 2011] Using EEF radius (= 0.90 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 21:24:12 2011] Initial guess for spatial extent in simple fitting = 0.90"
[Wed Oct  5 21:24:12 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.922
[Wed Oct  5 21:24:12 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 0.90"
[Wed Oct  5 21:24:13 2011] fullrun_ccd3_acisf10704_pi14-548_cl_pass0_src18.ximg exists
[Wed Oct  5 21:24:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10704_pi14-548_cl_pass0_src18.csv
[Wed Oct  5 21:24:13 2011] fullrun_ccd3_acisf10704_pi14-548_cl_pass0_src18_1.ximg exists
[Wed Oct  5 21:24:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10704_pi14-548_cl_pass0_src18.csv
[Wed Oct  5 21:24:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10704_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10704_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 21:24:13 2011] fullrun_ccd3_acisf10704_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Wed Oct  5 21:24:13 2011] fullrun_ccd3_acisf10704_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Wed Oct  5 21:24:13 2011] Fit fullrun_ccd3_acisf10704_pi14-548_cl_pass0_tfrozen_src18 appears to have run properly
[Wed Oct  5 21:24:32 2011] Spatial fit model total counts = 21.978500, observed total counts = 23.000000
[Wed Oct  5 21:24:32 2011] Offset between fit and detection position for source 4 = 0.839101 pixels
[Wed Oct  5 21:24:32 2011] 21.793120 total counts/ 7.046020 bgd. counts: snr = 5.555648
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.839101 pixels
  Position = (505.1, 349.2) = 16 47 19.38 -44 35 45.5
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 14.7 +/- 4.7
  Background counts = 7.0
  Rate = 0.0002 +/- 7e-05
[Wed Oct  5 21:24:32 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 21:24:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 21:24:32 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 21:24:32 2011] Source does appear to be extended
[Wed Oct  5 21:24:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 21:25:04 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 21:25:04 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Wed Oct  5 21:25:04 2011] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.279
[Wed Oct  5 21:25:04 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 0.62"
[Wed Oct  5 21:25:05 2011] fullrun_ccd3_acisf10704_pi14-548_cl_pass1_src18.ximg exists
[Wed Oct  5 21:25:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10704_pi14-548_cl_pass1_src18.csv
[Wed Oct  5 21:25:05 2011] fullrun_ccd3_acisf10704_pi14-548_cl_pass1_src18_1.ximg exists
[Wed Oct  5 21:25:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10704_pi14-548_cl_pass1_src18.csv
[Wed Oct  5 21:25:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10704_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10704_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 21:25:06 2011] fullrun_ccd3_acisf10704_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Wed Oct  5 21:25:06 2011] fullrun_ccd3_acisf10704_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Wed Oct  5 21:25:06 2011] Fit fullrun_ccd3_acisf10704_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Wed Oct  5 21:25:25 2011] Spatial fit model total counts = 23.634900, observed total counts = 23.000000
[Wed Oct  5 21:25:25 2011] Offset between fit and detection position for source 4 = 0.127983 pixels
[Wed Oct  5 21:25:25 2011] 23.713100 total counts/ 9.137800 bgd. counts: snr = 4.821661
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.127983 pixels
  Position = (505.1, 349.1) = 16 47 19.37 -44 35 45.5
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 14.6 +/- 4.9
  Background counts = 9.1
  Rate = 0.0002 +/- 7e-05
[Wed Oct  5 21:25:25 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 21:25:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 21:25:25 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 21:25:25 2011] Source does appear to be extended
[Wed Oct  5 21:25:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 21:31:18 2011] Not overwriting source region fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src4_src.reg
[Wed Oct  5 21:31:18 2011] Extracting stamp from image fullrun_ccd3_acisf10704_pi14-548_cl_sm2.00.img.gz, (481, 325) - (529, 373)
[Wed Oct  5 21:31:18 2011] Writing fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src4.gif
[Wed Oct  5 21:32:15 2011] ../../acisf10704/products/events/fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src4_src.evt and ../../acisf10704/products/events/fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Wed Oct  5 21:32:15 2011] Size of ../../acisf10704/products/events/fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src4_src.evt.gz[events] = 17 counts
[Wed Oct  5 21:32:15 2011] Mean chipx,y = (924.00, 505.47)
[Wed Oct  5 21:32:15 2011] Mean tdetx,y = (4626.53, 3985.00)
[Wed Oct  5 21:32:15 2011] chipx,y range = (910.00-943.00, 484.00-522.00)
[Wed Oct  5 21:32:15 2011] Size of ../../acisf10704/products/events/fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 10 counts
[Wed Oct  5 21:32:15 2011] ../../acisf10704/products/images/fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src4_src.img and ../../acisf10704/products/images/fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Wed Oct  5 21:32:15 2011] ../../acisf10704/products/spectra/fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src4_src.pi and ../../acisf10704/products/spectra/fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Wed Oct  5 21:32:15 2011] Not generating rmf since there are only 14 counts
[Wed Oct  5 21:32:18 2011] ../../acisf10704/products/lightcurves/fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src4_src.lc and ../../acisf10704/products/lightcurves/fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Wed Oct  5 21:33:21 2011] 192.996
[Wed Oct  5 21:33:53 2011] Updating aperture counts using extracted products
[Wed Oct  5 21:33:53 2011] Error reading totcts from fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src4_src.pi.gz
[Wed Oct  5 21:33:53 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 21:33:53 2011] Using photon index=1.80, rate=0.000211, arf fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src4.arf
[Wed Oct  5 21:33:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 21:33:53 2011] Updating source flux to 3.7e-15
[Wed Oct  5 21:34:09 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting