[Wed Oct  5 21:22:34 2011] Detection parameters:
  Position = (422.4, 779.5) = 16 47 23.18 -44 32 13.5
  Extent = 0.9" x 0.5", rotation angle = 1 degrees
  Source counts = 30.0 +/- 5.7
  Background counts = 3.0
  Rate = 0.0004 +/- 8e-05

[Wed Oct  5 21:22:36 2011] Off-axis axis estimate = 3.40'
[Wed Oct  5 21:24:12 2011] Using EEF radius (= 0.67 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 21:24:12 2011] Initial guess for spatial extent in simple fitting = 0.67"
[Wed Oct  5 21:24:12 2011] source mask rpix=1.4, npix_max = 13, mask sum = 9, frac = 0.651
[Wed Oct  5 21:24:12 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.67"
[Wed Oct  5 21:24:12 2011] fullrun_ccd3_acisf10704_pi14-548_cl_pass0_src11.ximg exists
[Wed Oct  5 21:24:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10704_pi14-548_cl_pass0_src11.csv
[Wed Oct  5 21:24:12 2011] fullrun_ccd3_acisf10704_pi14-548_cl_pass0_src11_1.ximg exists
[Wed Oct  5 21:24:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10704_pi14-548_cl_pass0_src11.csv
[Wed Oct  5 21:24:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10704_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10704_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 21:24:13 2011] fullrun_ccd3_acisf10704_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Wed Oct  5 21:24:13 2011] fullrun_ccd3_acisf10704_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Oct  5 21:24:13 2011] Fit fullrun_ccd3_acisf10704_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Wed Oct  5 21:24:32 2011] Spatial fit model total counts = 35.792000, observed total counts = 36.000000
[Wed Oct  5 21:24:32 2011] Offset between fit and detection position for source 20 = 0.924158 pixels
[Wed Oct  5 21:24:32 2011] 34.912350 total counts/ 2.782650 bgd. counts: snr = 19.260936
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.924158 pixels
  Position = (423.2, 779.9) = 16 47 23.17 -44 32 13.6
  Extent = 1.0 (0.7-1.3)", rotation angle = 0
  Source counts = 32.1 +/- 5.9
  Background counts = 2.8
  Rate = 0.0005 +/- 9e-05
[Wed Oct  5 21:24:32 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 21:24:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 21:24:32 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 21:24:32 2011] Source does appear to be extended
[Wed Oct  5 21:24:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 21:25:04 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 21:25:04 2011] Initial guess for spatial extent in simple fitting = 0.97"
[Wed Oct  5 21:25:04 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.022
[Wed Oct  5 21:25:04 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.97"
[Wed Oct  5 21:25:05 2011] fullrun_ccd3_acisf10704_pi14-548_cl_pass1_src11.ximg exists
[Wed Oct  5 21:25:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10704_pi14-548_cl_pass1_src11.csv
[Wed Oct  5 21:25:05 2011] fullrun_ccd3_acisf10704_pi14-548_cl_pass1_src11_1.ximg exists
[Wed Oct  5 21:25:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10704_pi14-548_cl_pass1_src11.csv
[Wed Oct  5 21:25:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10704_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10704_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 21:25:06 2011] fullrun_ccd3_acisf10704_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Wed Oct  5 21:25:06 2011] fullrun_ccd3_acisf10704_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Wed Oct  5 21:25:06 2011] Fit fullrun_ccd3_acisf10704_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Wed Oct  5 21:25:25 2011] Spatial fit model total counts = 34.571500, observed total counts = 36.000000
[Wed Oct  5 21:25:25 2011] Offset between fit and detection position for source 20 = 0.302746 pixels
[Wed Oct  5 21:25:25 2011] 33.992550 total counts/ 1.567850 bgd. counts: snr = 25.895465
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.302746 pixels
  Position = (422.9, 780.0) = 16 47 23.18 -44 32 13.5
  Extent = 1.0 (0.8-1.3)", rotation angle = 0
  Source counts = 32.4 +/- 5.8
  Background counts = 1.6
  Rate = 0.0005 +/- 8e-05
[Wed Oct  5 21:25:25 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 21:25:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 21:25:25 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 21:25:25 2011] Source does appear to be extended
[Wed Oct  5 21:25:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 21:31:18 2011] Not overwriting source region fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src20_src.reg
[Wed Oct  5 21:31:18 2011] Extracting stamp from image fullrun_ccd3_acisf10704_pi14-548_cl_sm2.00.img.gz, (376, 733) - (469, 827)
[Wed Oct  5 21:31:18 2011] Writing fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src20.gif
[Wed Oct  5 21:31:51 2011] ../../acisf10704/products/events/fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src20_src.evt and ../../acisf10704/products/events/fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src20_bgd.evt exist, delete to re-create
[Wed Oct  5 21:31:51 2011] Size of ../../acisf10704/products/events/fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src20_src.evt.gz[events] = 34 counts
[Wed Oct  5 21:31:51 2011] Mean chipx,y = (599.50, 797.56)
[Wed Oct  5 21:31:51 2011] Mean tdetx,y = (4334.44, 3660.50)
[Wed Oct  5 21:31:51 2011] chipx,y range = (583.00-620.00, 775.00-816.00)
[Wed Oct  5 21:31:51 2011] Size of ../../acisf10704/products/events/fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src20_bgd.evt.gz[events] = 73 counts
[Wed Oct  5 21:31:51 2011] ../../acisf10704/products/images/fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src20_src.img and ../../acisf10704/products/images/fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src20_bgd.img exist, delete to re-create
[Wed Oct  5 21:31:51 2011] ../../acisf10704/products/spectra/fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src20_src.pi and ../../acisf10704/products/spectra/fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src20_bgd.pi exist, delete to re-create
[Wed Oct  5 21:31:51 2011] Not generating rmf since there are only 32 counts
[Wed Oct  5 21:31:53 2011] ../../acisf10704/products/lightcurves/fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src20_src.lc and ../../acisf10704/products/lightcurves/fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src20_bgd.lc exist, delete to re-create
[Wed Oct  5 21:33:21 2011] 190.754
[Wed Oct  5 21:33:53 2011] Updating aperture counts using extracted products
[Wed Oct  5 21:33:53 2011] Error reading totcts from fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src20_src.pi.gz
[Wed Oct  5 21:33:53 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 21:33:53 2011] Using photon index=1.80, rate=0.000469, arf fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src20.arf
[Wed Oct  5 21:33:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 21:33:53 2011] Updating source flux to 8.2e-15
[Wed Oct  5 21:34:09 2011] Source 20 has fewer than 100.000000 counts, skipping spectral fitting