[Wed Oct 5 21:22:33 2011] Detection parameters: Position = (457.1, 813.3) = 16 47 21.58 -44 31 56.9 Extent = 0.6" x 0.5", rotation angle = 117 degrees Source counts = 359.7 +/- 19.1 Background counts = 5.3 Rate = 0.005 +/- 0.0003 [Wed Oct 5 21:22:36 2011] Off-axis axis estimate = 3.78' [Wed Oct 5 21:24:12 2011] Using EEF radius (= 0.77 ")to estimate initial spatial extent for simple fitting [Wed Oct 5 21:24:12 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed Oct 5 21:24:12 2011] Initial guess for spatial extent in simple fitting = 0.77" [Wed Oct 5 21:24:12 2011] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.942 [Wed Oct 5 21:24:12 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.77" [Wed Oct 5 21:24:12 2011] fullrun_ccd3_acisf10704_pi14-548_cl_pass0_src1.ximg exists [Wed Oct 5 21:24:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10704_pi14-548_cl_pass0_src1.csv [Wed Oct 5 21:24:12 2011] fullrun_ccd3_acisf10704_pi14-548_cl_pass0_src1_1.ximg exists [Wed Oct 5 21:24:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10704_pi14-548_cl_pass0_src1.csv [Wed Oct 5 21:24:12 2011] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf10704_pi14-548_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf10704_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Oct 5 21:24:13 2011] fullrun_ccd3_acisf10704_pi14-548_cl_pass0_tfrozen_src1.ximg exists [Wed Oct 5 21:24:13 2011] fullrun_ccd3_acisf10704_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists [Wed Oct 5 21:24:13 2011] Fit fullrun_ccd3_acisf10704_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly [Wed Oct 5 21:24:32 2011] Source 1 is offset by 6.351286 and 5.532438 pixels which is larger than 2 X fitted extent = 0.780175 x 0.780175, not incorporating fit results [Wed Oct 5 21:24:32 2011] Vigneting correction estimate = 1.000000 [Wed Oct 5 21:24:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Oct 5 21:24:32 2011] Assessing source extent using major [Wed Oct 5 21:24:32 2011] Source does appear to be extended [Wed Oct 5 21:24:32 2011] Computing asymmetry using major and minor axis, asym = 1.17 [Wed Oct 5 21:25:04 2011] Using EEF radius (= 0.77 ")to estimate initial spatial extent for simple fitting [Wed Oct 5 21:25:04 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed Oct 5 21:25:04 2011] Initial guess for spatial extent in simple fitting = 0.77" [Wed Oct 5 21:25:04 2011] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.942 [Wed Oct 5 21:25:04 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.77" [Wed Oct 5 21:25:05 2011] fullrun_ccd3_acisf10704_pi14-548_cl_pass1_src1.ximg exists [Wed Oct 5 21:25:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10704_pi14-548_cl_pass1_src1.csv [Wed Oct 5 21:25:05 2011] fullrun_ccd3_acisf10704_pi14-548_cl_pass1_src1_1.ximg exists [Wed Oct 5 21:25:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10704_pi14-548_cl_pass1_src1.csv [Wed Oct 5 21:25:05 2011] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf10704_pi14-548_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf10704_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Oct 5 21:25:05 2011] fullrun_ccd3_acisf10704_pi14-548_cl_pass1_tfrozen_src1.ximg exists [Wed Oct 5 21:25:05 2011] fullrun_ccd3_acisf10704_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists [Wed Oct 5 21:25:05 2011] Fit fullrun_ccd3_acisf10704_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly [Wed Oct 5 21:25:25 2011] Spatial fit model total counts = 367.405000, observed total counts = 368.000000 [Wed Oct 5 21:25:25 2011] Offset between fit and detection position for source 1 = 0.681443 pixels [Wed Oct 5 21:25:25 2011] 368.283300 total counts/ 20.529300 bgd. counts: snr = 76.751180 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.681443 pixels Position = (457.6, 813.8) = 16 47 21.59 -44 31 56.9 Extent = 0.7 (0.6-0.7)", rotation angle = 0 Source counts = 347.8 +/- 19.2 Background counts = 20.5 Rate = 0.005 +/- 0.0003 [Wed Oct 5 21:25:25 2011] Vigneting correction estimate = 1.000000 [Wed Oct 5 21:25:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Oct 5 21:25:25 2011] Assessing source extent using major axis lower bound [Wed Oct 5 21:25:25 2011] Source does appear to be extended [Wed Oct 5 21:25:25 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Oct 5 21:31:18 2011] Not overwriting source region fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src1_src.reg [Wed Oct 5 21:31:18 2011] Extracting stamp from image fullrun_ccd3_acisf10704_pi14-548_cl_sm2.00.img.gz, (427, 783) - (488, 845) [Wed Oct 5 21:31:18 2011] Writing fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src1.gif [Wed Oct 5 21:31:20 2011] ../../acisf10704/products/events/fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src1_src.evt and ../../acisf10704/products/events/fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create [Wed Oct 5 21:31:20 2011] Size of ../../acisf10704/products/events/fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src1_src.evt.gz[events] = 358 counts [Wed Oct 5 21:31:20 2011] Mean chipx,y = (555.07, 785.27) [Wed Oct 5 21:31:20 2011] Mean tdetx,y = (4346.73, 3616.07) [Wed Oct 5 21:31:20 2011] chipx,y range = (536.00-574.00, 767.00-806.00) [Wed Oct 5 21:31:20 2011] Size of ../../acisf10704/products/events/fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 29 counts [Wed Oct 5 21:31:20 2011] ../../acisf10704/products/images/fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src1_src.img and ../../acisf10704/products/images/fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create [Wed Oct 5 21:31:20 2011] ../../acisf10704/products/spectra/fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src1_src.pi and ../../acisf10704/products/spectra/fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create [Wed Oct 5 21:31:23 2011] ../../acisf10704/products/lightcurves/fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src1_src.lc and ../../acisf10704/products/lightcurves/fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create [Wed Oct 5 21:33:21 2011] Keeping rmf generated by specextract [Wed Oct 5 21:33:21 2011] 188.413 [Wed Oct 5 21:33:52 2011] Updating aperture counts using extracted products [Wed Oct 5 21:33:52 2011] Error reading totcts from fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src1_src.pi.gz [Wed Oct 5 21:33:53 2011] Calculating source flux in energy range 0.30-8.00 [Wed Oct 5 21:33:53 2011] Using photon index=1.80, rate=0.00503, arf fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src1.arf [Wed Oct 5 21:33:53 2011] Assuming count rate is from the 0.20-8.00 bandpass [Wed Oct 5 21:33:53 2011] Updating source flux to 8.9e-14 [Wed Oct 5 21:34:09 2011] Flag b found in src. 1 procflags, skipping spectral fitting [Wed Oct 5 21:34:23 2011] Reading fit data from acisf10704/analysis//spectral/fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src1_pl.csv [Wed Oct 5 21:34:23 2011] Spectral fit parameter nH value = 4.93226e+21 [Wed Oct 5 21:34:23 2011] Spectral fit parameter PhoIndex value = 7.11088 [Wed Oct 5 21:34:23 2011] Failed to get F(0.3-8.0) from acisf10704/analysis//spectral/fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected [Wed Oct 5 21:34:23 2011] Calculating source flux in energy range 0.30-8.00 [Wed Oct 5 21:34:23 2011] Using Nh = 4.9e+21, photon index=7.11, rate=0.00503, arf fullrun_ccd3_acisf10704_pi14-548_pass1_cl_src1.arf [Wed Oct 5 21:34:23 2011] Assuming count rate is from the 0.20-8.00 bandpass [Wed Oct 5 21:34:23 2011] Updating source flux to 5.8e-14