[Wed Oct  5 21:22:31 2011] Detection parameters:
  Position = (635.6, 534.9) = 16 47 54.31 -44 29 45.3
  Extent = 0.7" x 0.5", rotation angle = 160 degrees
  Source counts = 11.6 +/- 3.6
  Background counts = 1.4
  Rate = 0.0002 +/- 5e-05

[Wed Oct  5 21:22:33 2011] Off-axis axis estimate = 4.71'
[Wed Oct  5 21:24:10 2011] Using EEF radius (= 1.07 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 21:24:10 2011] Initial guess for spatial extent in simple fitting = 1.07"
[Wed Oct  5 21:24:10 2011] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.049
[Wed Oct  5 21:24:10 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 1.07"
[Wed Oct  5 21:24:11 2011] fullrun_ccd2_acisf10704_pi14-548_cl_pass0_src18.ximg exists
[Wed Oct  5 21:24:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10704_pi14-548_cl_pass0_src18.csv
[Wed Oct  5 21:24:11 2011] fullrun_ccd2_acisf10704_pi14-548_cl_pass0_src18_1.ximg exists
[Wed Oct  5 21:24:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10704_pi14-548_cl_pass0_src18.csv
[Wed Oct  5 21:24:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10704_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10704_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 21:24:11 2011] fullrun_ccd2_acisf10704_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Wed Oct  5 21:24:11 2011] fullrun_ccd2_acisf10704_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Wed Oct  5 21:24:11 2011] Fit fullrun_ccd2_acisf10704_pi14-548_cl_pass0_tfrozen_src18 appears to have run properly
[Wed Oct  5 21:24:28 2011] Spatial fit model total counts = 19.225600, observed total counts = 19.000000
[Wed Oct  5 21:24:28 2011] Offset between fit and detection position for source 20 = 0.913918 pixels
[Wed Oct  5 21:24:28 2011] 18.395560 total counts/ 7.902860 bgd. counts: snr = 3.732460
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.913918 pixels
  Position = (636.5, 535.1) = 16 47 54.30 -44 29 45.4
  Extent = 0.5 (0.3-0.9)", rotation angle = 0
  Source counts = 10.5 +/- 4.3
  Background counts = 7.9
  Rate = 0.0002 +/- 6e-05
[Wed Oct  5 21:24:28 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 21:24:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 21:24:28 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 21:24:28 2011] Source does appear to be extended
[Wed Oct  5 21:24:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 21:25:00 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 21:25:00 2011] Initial guess for spatial extent in simple fitting = 0.53"
[Wed Oct  5 21:25:00 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.905
[Wed Oct  5 21:25:00 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 0.53"
[Wed Oct  5 21:25:02 2011] fullrun_ccd2_acisf10704_pi14-548_cl_pass1_src18.ximg exists
[Wed Oct  5 21:25:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10704_pi14-548_cl_pass1_src18.csv
[Wed Oct  5 21:25:02 2011] fullrun_ccd2_acisf10704_pi14-548_cl_pass1_src18_1.ximg exists
[Wed Oct  5 21:25:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10704_pi14-548_cl_pass1_src18.csv
[Wed Oct  5 21:25:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10704_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10704_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 21:25:03 2011] fullrun_ccd2_acisf10704_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Wed Oct  5 21:25:03 2011] fullrun_ccd2_acisf10704_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Wed Oct  5 21:25:03 2011] Fit fullrun_ccd2_acisf10704_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Wed Oct  5 21:25:21 2011] Spatial fit model total counts = 19.010700, observed total counts = 19.000000
[Wed Oct  5 21:25:21 2011] Offset between fit and detection position for source 20 = 0.036960 pixels
[Wed Oct  5 21:25:21 2011] 18.049450 total counts/ 7.545750 bgd. counts: snr = 3.823764
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.036960 pixels
  Position = (636.4, 535.1) = 16 47 54.30 -44 29 45.4
  Extent = 0.5 (0.3-0.9)", rotation angle = 0
  Source counts = 10.5 +/- 4.2
  Background counts = 7.5
  Rate = 0.0002 +/- 6e-05
[Wed Oct  5 21:25:21 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 21:25:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 21:25:21 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 21:25:21 2011] Source does appear to be extended
[Wed Oct  5 21:25:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 21:29:31 2011] Not overwriting source region fullrun_ccd2_acisf10704_pi14-548_pass1_cl_src20_src.reg
[Wed Oct  5 21:29:31 2011] Extracting stamp from image fullrun_ccd2_acisf10704_pi14-548_cl_sm2.00.img.gz, (613, 511) - (660, 559)
[Wed Oct  5 21:29:31 2011] Writing fullrun_ccd2_acisf10704_pi14-548_pass1_cl_src20.gif
[Wed Oct  5 21:30:34 2011] ../../acisf10704/products/events/fullrun_ccd2_acisf10704_pi14-548_pass1_cl_src20_src.evt and ../../acisf10704/products/events/fullrun_ccd2_acisf10704_pi14-548_pass1_cl_src20_bgd.evt exist, delete to re-create
[Wed Oct  5 21:30:34 2011] Size of ../../acisf10704/products/events/fullrun_ccd2_acisf10704_pi14-548_pass1_cl_src20_src.evt.gz[events] = 12 counts
[Wed Oct  5 21:30:34 2011] Mean chipx,y = (328.58, 538.08)
[Wed Oct  5 21:30:34 2011] Mean tdetx,y = (3599.08, 3757.42)
[Wed Oct  5 21:30:34 2011] chipx,y range = (311.00-345.00, 519.00-552.00)
[Wed Oct  5 21:30:34 2011] Size of ../../acisf10704/products/events/fullrun_ccd2_acisf10704_pi14-548_pass1_cl_src20_bgd.evt.gz[events] = 24 counts
[Wed Oct  5 21:30:34 2011] ../../acisf10704/products/images/fullrun_ccd2_acisf10704_pi14-548_pass1_cl_src20_src.img and ../../acisf10704/products/images/fullrun_ccd2_acisf10704_pi14-548_pass1_cl_src20_bgd.img exist, delete to re-create
[Wed Oct  5 21:30:34 2011] ../../acisf10704/products/spectra/fullrun_ccd2_acisf10704_pi14-548_pass1_cl_src20_src.pi and ../../acisf10704/products/spectra/fullrun_ccd2_acisf10704_pi14-548_pass1_cl_src20_bgd.pi exist, delete to re-create
[Wed Oct  5 21:30:34 2011] Not generating rmf since there are only 10 counts
[Wed Oct  5 21:30:37 2011] ../../acisf10704/products/lightcurves/fullrun_ccd2_acisf10704_pi14-548_pass1_cl_src20_src.lc and ../../acisf10704/products/lightcurves/fullrun_ccd2_acisf10704_pi14-548_pass1_cl_src20_bgd.lc exist, delete to re-create
[Wed Oct  5 21:31:17 2011] 184.446
[Wed Oct  5 21:33:51 2011] Updating aperture counts using extracted products
[Wed Oct  5 21:33:51 2011] Error reading totcts from fullrun_ccd2_acisf10704_pi14-548_pass1_cl_src20_src.pi.gz
[Wed Oct  5 21:33:52 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 21:33:52 2011] Using photon index=1.80, rate=0.000152, arf fullrun_ccd2_acisf10704_pi14-548_pass1_cl_src20.arf
[Wed Oct  5 21:33:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 21:33:52 2011] Updating source flux to 2.7e-15
[Wed Oct  5 21:34:04 2011] Source 20 has fewer than 100.000000 counts, skipping spectral fitting