[Wed Oct  5 21:22:30 2011] Detection parameters:
  Position = (1270.5, 755.6) = 16 47 25.12 -44 27 56.7
  Extent = 1.7" x 1.2", rotation angle = 130 degrees
  Source counts = 43.0 +/- 7.3
  Background counts = 10.0
  Rate = 0.0006 +/- 0.0001

[Wed Oct  5 21:22:33 2011] Off-axis axis estimate = 6.40'
[Wed Oct  5 21:24:10 2011] Using EEF radius (= 1.84 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 21:24:10 2011] Initial guess for spatial extent in simple fitting = 1.84"
[Wed Oct  5 21:24:10 2011] source mask rpix=3.7, npix_max = 71, mask sum = 81, frac = 1.128
[Wed Oct  5 21:24:10 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 1.84"
[Wed Oct  5 21:24:10 2011] fullrun_ccd2_acisf10704_pi14-548_cl_pass0_src2.ximg exists
[Wed Oct  5 21:24:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10704_pi14-548_cl_pass0_src2.csv
[Wed Oct  5 21:24:10 2011] fullrun_ccd2_acisf10704_pi14-548_cl_pass0_src2_1.ximg exists
[Wed Oct  5 21:24:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10704_pi14-548_cl_pass0_src2.csv
[Wed Oct  5 21:24:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10704_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10704_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 21:24:11 2011] fullrun_ccd2_acisf10704_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Wed Oct  5 21:24:11 2011] fullrun_ccd2_acisf10704_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Oct  5 21:24:11 2011] Fit fullrun_ccd2_acisf10704_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Oct  5 21:24:28 2011] Spatial fit model total counts = 53.914300, observed total counts = 55.000000
[Wed Oct  5 21:24:28 2011] Offset between fit and detection position for source 1 = 0.971452 pixels
[Wed Oct  5 21:24:28 2011] 53.930100 total counts/ 18.532400 bgd. counts: snr = 8.222601
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.971452 pixels
  Position = (1271.5, 755.8) = 16 47 25.10 -44 27 56.9
  Extent = 1.4 (1.0-2.1)", rotation angle = 0
  Source counts = 35.4 +/- 7.3
  Background counts = 18.5
  Rate = 0.0005 +/- 0.0001
[Wed Oct  5 21:24:28 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 21:24:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 21:24:28 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 21:24:28 2011] Source does appear to be extended
[Wed Oct  5 21:24:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 21:25:00 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 21:25:00 2011] Initial guess for spatial extent in simple fitting = 1.36"
[Wed Oct  5 21:25:00 2011] source mask rpix=2.8, npix_max = 42, mask sum = 49, frac = 1.145
[Wed Oct  5 21:25:00 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 1.36"
[Wed Oct  5 21:25:02 2011] fullrun_ccd2_acisf10704_pi14-548_cl_pass1_src2.ximg exists
[Wed Oct  5 21:25:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10704_pi14-548_cl_pass1_src2.csv
[Wed Oct  5 21:25:02 2011] fullrun_ccd2_acisf10704_pi14-548_cl_pass1_src2_1.ximg exists
[Wed Oct  5 21:25:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10704_pi14-548_cl_pass1_src2.csv
[Wed Oct  5 21:25:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10704_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10704_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 21:25:02 2011] fullrun_ccd2_acisf10704_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Wed Oct  5 21:25:02 2011] fullrun_ccd2_acisf10704_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Oct  5 21:25:02 2011] Fit fullrun_ccd2_acisf10704_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Oct  5 21:25:21 2011] Spatial fit model total counts = 47.973600, observed total counts = 48.000000
[Wed Oct  5 21:25:21 2011] Offset between fit and detection position for source 1 = 0.478373 pixels
[Wed Oct  5 21:25:21 2011] 49.021500 total counts/ 15.139100 bgd. counts: snr = 8.708115
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.478373 pixels
  Position = (1271.2, 755.3) = 16 47 25.11 -44 27 57.1
  Extent = 1.3 (1.0-2.1)", rotation angle = 0
  Source counts = 33.9 +/- 7.0
  Background counts = 15.1
  Rate = 0.0005 +/- 0.0001
[Wed Oct  5 21:25:21 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 21:25:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 21:25:21 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 21:25:21 2011] Source does appear to be extended
[Wed Oct  5 21:25:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 21:29:30 2011] Not overwriting source region fullrun_ccd2_acisf10704_pi14-548_pass1_cl_src1_src.reg
[Wed Oct  5 21:29:30 2011] Extracting stamp from image fullrun_ccd2_acisf10704_pi14-548_cl_sm2.00.img.gz, (1212, 696) - (1330, 814)
[Wed Oct  5 21:29:30 2011] Writing fullrun_ccd2_acisf10704_pi14-548_pass1_cl_src1.gif
[Wed Oct  5 21:29:35 2011] ../../acisf10704/products/events/fullrun_ccd2_acisf10704_pi14-548_pass1_cl_src1_src.evt and ../../acisf10704/products/events/fullrun_ccd2_acisf10704_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Oct  5 21:29:35 2011] Size of ../../acisf10704/products/events/fullrun_ccd2_acisf10704_pi14-548_pass1_cl_src1_src.evt.gz[events] = 49 counts
[Wed Oct  5 21:29:35 2011] Mean chipx,y = (844.78, 963.47)
[Wed Oct  5 21:29:35 2011] Mean tdetx,y = (4024.47, 3241.22)
[Wed Oct  5 21:29:35 2011] chipx,y range = (825.00-864.00, 938.00-984.00)
[Wed Oct  5 21:29:35 2011] Size of ../../acisf10704/products/events/fullrun_ccd2_acisf10704_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 100 counts
[Wed Oct  5 21:29:35 2011] ../../acisf10704/products/images/fullrun_ccd2_acisf10704_pi14-548_pass1_cl_src1_src.img and ../../acisf10704/products/images/fullrun_ccd2_acisf10704_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Oct  5 21:29:35 2011] ../../acisf10704/products/spectra/fullrun_ccd2_acisf10704_pi14-548_pass1_cl_src1_src.pi and ../../acisf10704/products/spectra/fullrun_ccd2_acisf10704_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Oct  5 21:29:35 2011] Not generating rmf since there are only 33 counts
[Wed Oct  5 21:29:41 2011] ../../acisf10704/products/lightcurves/fullrun_ccd2_acisf10704_pi14-548_pass1_cl_src1_src.lc and ../../acisf10704/products/lightcurves/fullrun_ccd2_acisf10704_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Oct  5 21:31:17 2011] 171.558
[Wed Oct  5 21:33:50 2011] Updating aperture counts using extracted products
[Wed Oct  5 21:33:50 2011] Error reading totcts from fullrun_ccd2_acisf10704_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Oct  5 21:33:52 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 21:33:52 2011] Using photon index=1.80, rate=0.00049, arf fullrun_ccd2_acisf10704_pi14-548_pass1_cl_src1.arf
[Wed Oct  5 21:33:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 21:33:52 2011] Updating source flux to 9.3e-15
[Wed Oct  5 21:34:04 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting