[Wed Oct  5 21:22:28 2011] Detection parameters:
  Position = (786.3, 858.1) = 16 47 31.36 -44 38 49.9
  Extent = 0.9" x 0.7", rotation angle = 115 degrees
  Source counts = 45.5 +/- 7.0
  Background counts = 3.5
  Rate = 0.0007 +/- 0.0001

[Wed Oct  5 21:22:29 2011] Off-axis axis estimate = 5.32'
[Wed Oct  5 21:24:08 2011] Using EEF radius (= 1.32 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 21:24:08 2011] Initial guess for spatial extent in simple fitting = 1.32"
[Wed Oct  5 21:24:08 2011] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.894
[Wed Oct  5 21:24:08 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 1.32"
[Wed Oct  5 21:24:09 2011] fullrun_ccd1_acisf10704_pi14-548_cl_pass0_src5.ximg exists
[Wed Oct  5 21:24:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10704_pi14-548_cl_pass0_src5.csv
[Wed Oct  5 21:24:09 2011] fullrun_ccd1_acisf10704_pi14-548_cl_pass0_src5_1.ximg exists
[Wed Oct  5 21:24:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10704_pi14-548_cl_pass0_src5.csv
[Wed Oct  5 21:24:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10704_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10704_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 21:24:09 2011] fullrun_ccd1_acisf10704_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Wed Oct  5 21:24:09 2011] fullrun_ccd1_acisf10704_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Oct  5 21:24:09 2011] Fit fullrun_ccd1_acisf10704_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Oct  5 21:24:25 2011] Spatial fit model total counts = 56.682500, observed total counts = 57.000000
[Wed Oct  5 21:24:25 2011] Offset between fit and detection position for source 2 = 0.281676 pixels
[Wed Oct  5 21:24:25 2011] 57.260000 total counts/ 15.639600 bgd. counts: snr = 10.524305
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.281676 pixels
  Position = (786.4, 858.3) = 16 47 31.37 -44 38 50.0
  Extent = 0.9 (0.7-1.3)", rotation angle = 0
  Source counts = 41.6 +/- 7.6
  Background counts = 15.6
  Rate = 0.0006 +/- 0.0001
[Wed Oct  5 21:24:25 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 21:24:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 21:24:25 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 21:24:25 2011] Source does appear to be extended
[Wed Oct  5 21:24:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 21:24:58 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 21:24:58 2011] Initial guess for spatial extent in simple fitting = 0.91"
[Wed Oct  5 21:24:58 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.126
[Wed Oct  5 21:24:58 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.91"
[Wed Oct  5 21:24:59 2011] fullrun_ccd1_acisf10704_pi14-548_cl_pass1_src5.ximg exists
[Wed Oct  5 21:24:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10704_pi14-548_cl_pass1_src5.csv
[Wed Oct  5 21:24:59 2011] fullrun_ccd1_acisf10704_pi14-548_cl_pass1_src5_1.ximg exists
[Wed Oct  5 21:24:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10704_pi14-548_cl_pass1_src5.csv
[Wed Oct  5 21:24:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10704_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10704_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 21:25:00 2011] fullrun_ccd1_acisf10704_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Wed Oct  5 21:25:00 2011] fullrun_ccd1_acisf10704_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Oct  5 21:25:00 2011] Fit fullrun_ccd1_acisf10704_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Oct  5 21:25:17 2011] Spatial fit model total counts = 56.536100, observed total counts = 57.000000
[Wed Oct  5 21:25:17 2011] Offset between fit and detection position for source 2 = 0.003616 pixels
[Wed Oct  5 21:25:17 2011] 57.153600 total counts/ 15.405300 bgd. counts: snr = 10.636622
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.003616 pixels
  Position = (786.4, 858.3) = 16 47 31.37 -44 38 50.0
  Extent = 0.9 (0.7-1.3)", rotation angle = 0
  Source counts = 41.7 +/- 7.6
  Background counts = 15.4
  Rate = 0.0006 +/- 0.0001
[Wed Oct  5 21:25:17 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 21:25:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 21:25:17 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 21:25:17 2011] Source does appear to be extended
[Wed Oct  5 21:25:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 21:27:49 2011] Not overwriting source region fullrun_ccd1_acisf10704_pi14-548_pass1_cl_src2_src.reg
[Wed Oct  5 21:27:49 2011] Extracting stamp from image fullrun_ccd1_acisf10704_pi14-548_cl_sm2.00.img.gz, (744, 816) - (829, 900)
[Wed Oct  5 21:27:49 2011] Writing fullrun_ccd1_acisf10704_pi14-548_pass1_cl_src2.gif
[Wed Oct  5 21:28:19 2011] ../../acisf10704/products/events/fullrun_ccd1_acisf10704_pi14-548_pass1_cl_src2_src.evt and ../../acisf10704/products/events/fullrun_ccd1_acisf10704_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Wed Oct  5 21:28:19 2011] Size of ../../acisf10704/products/events/fullrun_ccd1_acisf10704_pi14-548_pass1_cl_src2_src.evt.gz[events] = 55 counts
[Wed Oct  5 21:28:19 2011] Mean chipx,y = (340.11, 529.27)
[Wed Oct  5 21:28:19 2011] Mean tdetx,y = (4602.73, 4447.11)
[Wed Oct  5 21:28:19 2011] chipx,y range = (319.00-360.00, 512.00-548.00)
[Wed Oct  5 21:28:19 2011] Size of ../../acisf10704/products/events/fullrun_ccd1_acisf10704_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 45 counts
[Wed Oct  5 21:28:19 2011] ../../acisf10704/products/images/fullrun_ccd1_acisf10704_pi14-548_pass1_cl_src2_src.img and ../../acisf10704/products/images/fullrun_ccd1_acisf10704_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Wed Oct  5 21:28:19 2011] ../../acisf10704/products/spectra/fullrun_ccd1_acisf10704_pi14-548_pass1_cl_src2_src.pi and ../../acisf10704/products/spectra/fullrun_ccd1_acisf10704_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Wed Oct  5 21:28:19 2011] Not generating rmf since there are only 41 counts
[Wed Oct  5 21:28:24 2011] ../../acisf10704/products/lightcurves/fullrun_ccd1_acisf10704_pi14-548_pass1_cl_src2_src.lc and ../../acisf10704/products/lightcurves/fullrun_ccd1_acisf10704_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Wed Oct  5 21:29:30 2011] 184.534
[Wed Oct  5 21:33:49 2011] Updating aperture counts using extracted products
[Wed Oct  5 21:33:49 2011] Error reading totcts from fullrun_ccd1_acisf10704_pi14-548_pass1_cl_src2_src.pi.gz
[Wed Oct  5 21:33:49 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 21:33:49 2011] Using photon index=1.80, rate=0.000604, arf fullrun_ccd1_acisf10704_pi14-548_pass1_cl_src2.arf
[Wed Oct  5 21:33:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 21:33:50 2011] Updating source flux to 1.1e-14
[Wed Oct  5 21:33:59 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting