[Mon Oct 24 11:40:44 2011] Detection parameters:
  Position = (762.7, 1318.1) = 17 16 35.87 -39 51 1.3
  Extent = 3.0" x 1.9", rotation angle = 172 degrees
  Source counts = 17.3 +/- 5.6
  Background counts = 13.7
  Rate = 0.0003 +/- 0.0001

[Mon Oct 24 11:40:45 2011] Off-axis axis estimate = 8.46'
[Mon Oct 24 11:42:39 2011] Using EEF radius (= 3.16 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 11:42:39 2011] Initial guess for spatial extent in simple fitting = 3.16"
[Mon Oct 24 11:42:39 2011] source mask rpix=6.4, npix_max = 192, mask sum = 196, frac = 1.021
[Mon Oct 24 11:42:39 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 3.16"
[Mon Oct 24 11:42:40 2011] fullrun_ccd0_acisf10697_pi14-548_cl_pass0_src20.ximg exists
[Mon Oct 24 11:42:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10697_pi14-548_cl_pass0_src20.csv
[Mon Oct 24 11:42:40 2011] fullrun_ccd0_acisf10697_pi14-548_cl_pass0_src20_1.ximg exists
[Mon Oct 24 11:42:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10697_pi14-548_cl_pass0_src20.csv
[Mon Oct 24 11:42:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10697_pi14-548_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10697_pi14-548_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 11:42:40 2011] fullrun_ccd0_acisf10697_pi14-548_cl_pass0_tfrozen_src20.ximg exists
[Mon Oct 24 11:42:40 2011] fullrun_ccd0_acisf10697_pi14-548_cl_pass0_tfrozen_src20_1.ximg exists
[Mon Oct 24 11:42:40 2011] Fit fullrun_ccd0_acisf10697_pi14-548_cl_pass0_tfrozen_src20 appears to have run properly
[Mon Oct 24 11:42:52 2011] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 35.932108 pixels away
[Mon Oct 24 11:42:52 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 11:42:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 11:42:52 2011] Assessing source extent using major
[Mon Oct 24 11:42:52 2011] Source does appear to be extended
[Mon Oct 24 11:42:52 2011] Computing asymmetry using major and minor axis, asym = 1.61
[Mon Oct 24 11:42:52 2011] Source is asymmetric
[Mon Oct 24 11:43:20 2011] Using EEF radius (= 3.16 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 11:43:20 2011] Initial guess for spatial extent in simple fitting = 3.16"
[Mon Oct 24 11:43:20 2011] source mask rpix=6.4, npix_max = 192, mask sum = 196, frac = 1.021
[Mon Oct 24 11:43:20 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 3.16"
[Mon Oct 24 11:43:21 2011] fullrun_ccd0_acisf10697_pi14-548_cl_pass1_src20.ximg exists
[Mon Oct 24 11:43:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10697_pi14-548_cl_pass1_src20.csv
[Mon Oct 24 11:43:21 2011] fullrun_ccd0_acisf10697_pi14-548_cl_pass1_src20_1.ximg exists
[Mon Oct 24 11:43:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10697_pi14-548_cl_pass1_src20.csv
[Mon Oct 24 11:43:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10697_pi14-548_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10697_pi14-548_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 11:43:21 2011] fullrun_ccd0_acisf10697_pi14-548_cl_pass1_tfrozen_src20.ximg exists
[Mon Oct 24 11:43:21 2011] fullrun_ccd0_acisf10697_pi14-548_cl_pass1_tfrozen_src20_1.ximg exists
[Mon Oct 24 11:43:21 2011] Fit fullrun_ccd0_acisf10697_pi14-548_cl_pass1_tfrozen_src20 appears to have run properly
[Mon Oct 24 11:43:33 2011] Spatial fit model total counts = 38.455800, observed total counts = 39.000000
[Mon Oct 24 11:43:33 2011] Offset between fit and detection position for source 28 = 3.141229 pixels
[Mon Oct 24 11:43:33 2011] 37.991900 total counts/ 15.246700 bgd. counts: snr = 5.825079
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 3.141229 pixels
  Position = (765.9, 1318.1) = 17 16 35.76 -39 51 1.5
  Extent = 3.1 (0.9-5.5)", rotation angle = 0
  Source counts = 22.7 +/- 6.2
  Background counts = 15.2
  Rate = 0.0004 +/- 0.0001
[Mon Oct 24 11:43:33 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 11:43:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 11:43:33 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 11:43:33 2011] Source does appear to be extended
[Mon Oct 24 11:43:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 11:44:00 2011] Not overwriting source region fullrun_ccd0_acisf10697_pi14-548_pass1_cl_src28_src.reg
[Mon Oct 24 11:44:00 2011] Extracting stamp from image fullrun_ccd0_acisf10697_pi14-548_cl_sm2.00.img.gz, (623, 1175) - (909, 1439)
[Mon Oct 24 11:44:00 2011] Writing fullrun_ccd0_acisf10697_pi14-548_pass1_cl_src28.gif
[Mon Oct 24 11:44:59 2011] ../../acisf10697/products/events/fullrun_ccd0_acisf10697_pi14-548_pass1_cl_src28_src.evt and ../../acisf10697/products/events/fullrun_ccd0_acisf10697_pi14-548_pass1_cl_src28_bgd.evt exist, delete to re-create
[Mon Oct 24 11:44:59 2011] Size of ../../acisf10697/products/events/fullrun_ccd0_acisf10697_pi14-548_pass1_cl_src28_src.evt.gz[events] = 48 counts
[Mon Oct 24 11:44:59 2011] Mean chipx,y = (899.27, 37.42)
[Mon Oct 24 11:44:59 2011] Mean tdetx,y = (3098.42, 4232.73)
[Mon Oct 24 11:44:59 2011] chipx,y range = (872.00-922.00, 12.00-78.00)
[Mon Oct 24 11:44:59 2011] Size of ../../acisf10697/products/events/fullrun_ccd0_acisf10697_pi14-548_pass1_cl_src28_bgd.evt.gz[events] = 316 counts
[Mon Oct 24 11:44:59 2011] ../../acisf10697/products/images/fullrun_ccd0_acisf10697_pi14-548_pass1_cl_src28_src.img and ../../acisf10697/products/images/fullrun_ccd0_acisf10697_pi14-548_pass1_cl_src28_bgd.img exist, delete to re-create
[Mon Oct 24 11:44:59 2011] ../../acisf10697/products/spectra/fullrun_ccd0_acisf10697_pi14-548_pass1_cl_src28_src.pi and ../../acisf10697/products/spectra/fullrun_ccd0_acisf10697_pi14-548_pass1_cl_src28_bgd.pi exist, delete to re-create
[Mon Oct 24 11:44:59 2011] Not generating rmf since there are only 22 counts
[Mon Oct 24 11:45:02 2011] ../../acisf10697/products/lightcurves/fullrun_ccd0_acisf10697_pi14-548_pass1_cl_src28_src.lc and ../../acisf10697/products/lightcurves/fullrun_ccd0_acisf10697_pi14-548_pass1_cl_src28_bgd.lc exist, delete to re-create
[Mon Oct 24 11:45:15 2011] 165.529
[Mon Oct 24 11:48:21 2011] Updating aperture counts using extracted products
[Mon Oct 24 11:48:21 2011] Error reading totcts from fullrun_ccd0_acisf10697_pi14-548_pass1_cl_src28_src.pi.gz
[Mon Oct 24 11:48:22 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 11:48:22 2011] Using photon index=1.80, rate=0.000397, arf fullrun_ccd0_acisf10697_pi14-548_pass1_cl_src28.arf
[Mon Oct 24 11:48:22 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 11:48:22 2011] Updating source flux to 7e-15
[Mon Oct 24 11:48:26 2011] Source 28 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Oct 24 11:48:27 2011] acisf10697/analysis//spectral/fullrun_ccd0_acisf10697_pi14-548_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete