[Mon Oct 24 11:40:44 2011] Detection parameters:
  Position = (983.2, 555.9) = 17 16 26.49 -39 57 16.4
  Extent = 0.7" x 0.5", rotation angle = 91 degrees
  Source counts = 11.5 +/- 3.6
  Background counts = 1.5
  Rate = 0.0002 +/- 6e-05

[Mon Oct 24 11:40:45 2011] Off-axis axis estimate = 4.39'
[Mon Oct 24 11:42:39 2011] Using EEF radius (= 0.95 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 11:42:39 2011] Initial guess for spatial extent in simple fitting = 0.95"
[Mon Oct 24 11:42:39 2011] source mask rpix=1.9, npix_max = 23, mask sum = 24, frac = 1.010
[Mon Oct 24 11:42:39 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 0.95"
[Mon Oct 24 11:42:40 2011] fullrun_ccd0_acisf10697_pi14-548_cl_pass0_src15.ximg exists
[Mon Oct 24 11:42:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10697_pi14-548_cl_pass0_src15.csv
[Mon Oct 24 11:42:40 2011] fullrun_ccd0_acisf10697_pi14-548_cl_pass0_src15_1.ximg exists
[Mon Oct 24 11:42:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10697_pi14-548_cl_pass0_src15.csv
[Mon Oct 24 11:42:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10697_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10697_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 11:42:40 2011] fullrun_ccd0_acisf10697_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Mon Oct 24 11:42:40 2011] fullrun_ccd0_acisf10697_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Mon Oct 24 11:42:40 2011] Fit fullrun_ccd0_acisf10697_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Mon Oct 24 11:42:52 2011] Spatial fit model total counts = 19.634300, observed total counts = 20.000000
[Mon Oct 24 11:42:52 2011] Offset between fit and detection position for source 18 = 0.560021 pixels
[Mon Oct 24 11:42:52 2011] 19.845320 total counts/ 9.249120 bgd. counts: snr = 3.484175
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.560021 pixels
  Position = (983.8, 555.8) = 17 16 26.48 -39 57 16.7
  Extent = 0.7 (0.5-1.3)", rotation angle = 0
  Source counts = 10.6 +/- 4.5
  Background counts = 9.2
  Rate = 0.0002 +/- 8e-05
[Mon Oct 24 11:42:52 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 11:42:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 11:42:52 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 11:42:52 2011] Source does appear to be extended
[Mon Oct 24 11:42:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 11:43:20 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 24 11:43:20 2011] Initial guess for spatial extent in simple fitting = 0.66"
[Mon Oct 24 11:43:20 2011] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.168
[Mon Oct 24 11:43:20 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 0.66"
[Mon Oct 24 11:43:21 2011] fullrun_ccd0_acisf10697_pi14-548_cl_pass1_src15.ximg exists
[Mon Oct 24 11:43:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10697_pi14-548_cl_pass1_src15.csv
[Mon Oct 24 11:43:21 2011] fullrun_ccd0_acisf10697_pi14-548_cl_pass1_src15_1.ximg exists
[Mon Oct 24 11:43:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10697_pi14-548_cl_pass1_src15.csv
[Mon Oct 24 11:43:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10697_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10697_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 11:43:21 2011] fullrun_ccd0_acisf10697_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Mon Oct 24 11:43:21 2011] fullrun_ccd0_acisf10697_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Mon Oct 24 11:43:21 2011] Fit fullrun_ccd0_acisf10697_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Mon Oct 24 11:43:33 2011] Spatial fit model total counts = 20.677700, observed total counts = 21.000000
[Mon Oct 24 11:43:33 2011] Offset between fit and detection position for source 18 = 0.121664 pixels
[Mon Oct 24 11:43:33 2011] 21.211000 total counts/ 10.656100 bgd. counts: snr = 3.233367
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.121664 pixels
  Position = (983.6, 555.9) = 17 16 26.49 -39 57 16.7
  Extent = 0.7 (0.4-1.4)", rotation angle = 0
  Source counts = 10.6 +/- 4.6
  Background counts = 10.7
  Rate = 0.0002 +/- 8e-05
[Mon Oct 24 11:43:33 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 11:43:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 11:43:33 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 11:43:33 2011] Source does appear to be extended
[Mon Oct 24 11:43:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 11:44:00 2011] Not overwriting source region fullrun_ccd0_acisf10697_pi14-548_pass1_cl_src18_src.reg
[Mon Oct 24 11:44:00 2011] Extracting stamp from image fullrun_ccd0_acisf10697_pi14-548_cl_sm2.00.img.gz, (950, 523) - (1017, 589)
[Mon Oct 24 11:44:00 2011] Writing fullrun_ccd0_acisf10697_pi14-548_pass1_cl_src18.gif
[Mon Oct 24 11:44:45 2011] ../../acisf10697/products/events/fullrun_ccd0_acisf10697_pi14-548_pass1_cl_src18_src.evt and ../../acisf10697/products/events/fullrun_ccd0_acisf10697_pi14-548_pass1_cl_src18_bgd.evt exist, delete to re-create
[Mon Oct 24 11:44:45 2011] Size of ../../acisf10697/products/events/fullrun_ccd0_acisf10697_pi14-548_pass1_cl_src18_src.evt.gz[events] = 16 counts
[Mon Oct 24 11:44:45 2011] Mean chipx,y = (645.00, 788.19)
[Mon Oct 24 11:44:45 2011] Mean tdetx,y = (3849.19, 4487.00)
[Mon Oct 24 11:44:45 2011] chipx,y range = (628.00-664.00, 773.00-804.00)
[Mon Oct 24 11:44:45 2011] Size of ../../acisf10697/products/events/fullrun_ccd0_acisf10697_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 24 counts
[Mon Oct 24 11:44:45 2011] ../../acisf10697/products/images/fullrun_ccd0_acisf10697_pi14-548_pass1_cl_src18_src.img and ../../acisf10697/products/images/fullrun_ccd0_acisf10697_pi14-548_pass1_cl_src18_bgd.img exist, delete to re-create
[Mon Oct 24 11:44:45 2011] ../../acisf10697/products/spectra/fullrun_ccd0_acisf10697_pi14-548_pass1_cl_src18_src.pi and ../../acisf10697/products/spectra/fullrun_ccd0_acisf10697_pi14-548_pass1_cl_src18_bgd.pi exist, delete to re-create
[Mon Oct 24 11:44:45 2011] Not generating rmf since there are only 10 counts
[Mon Oct 24 11:44:48 2011] ../../acisf10697/products/lightcurves/fullrun_ccd0_acisf10697_pi14-548_pass1_cl_src18_src.lc and ../../acisf10697/products/lightcurves/fullrun_ccd0_acisf10697_pi14-548_pass1_cl_src18_bgd.lc exist, delete to re-create
[Mon Oct 24 11:45:15 2011] 186.384
[Mon Oct 24 11:48:21 2011] Updating aperture counts using extracted products
[Mon Oct 24 11:48:21 2011] Error reading totcts from fullrun_ccd0_acisf10697_pi14-548_pass1_cl_src18_src.pi.gz
[Mon Oct 24 11:48:22 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 11:48:22 2011] Using photon index=1.80, rate=0.000184, arf fullrun_ccd0_acisf10697_pi14-548_pass1_cl_src18.arf
[Mon Oct 24 11:48:22 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 11:48:22 2011] Updating source flux to 2.9e-15
[Mon Oct 24 11:48:26 2011] Source 18 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Oct 24 11:48:27 2011] acisf10697/analysis//spectral/fullrun_ccd0_acisf10697_pi14-548_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete