[Sat Oct 15 19:53:37 2011] Detection parameters:
  Position = (1073.5, 646.8) = 18 25 56.66 -14 49 14.0
  Extent = 1.9" x 1.5", rotation angle = 16 degrees
  Source counts = 99.9 +/- 10.5
  Background counts = 10.1
  Rate = 0.003 +/- 0.0003

[Sat Oct 15 19:53:38 2011] Off-axis axis estimate = 6.67'
[Sat Oct 15 19:53:58 2011] Using EEF radius (= 1.99 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 19:53:58 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 15 19:53:58 2011] Initial guess for spatial extent in simple fitting = 1.99"
[Sat Oct 15 19:53:58 2011] source mask rpix=4.0, npix_max = 82, mask sum = 81, frac = 0.983
[Sat Oct 15 19:53:58 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.99"
[Sat Oct 15 19:53:58 2011] fullrun_ccd3_acisf10696_pi14-548_cl_pass0_src3.ximg exists
[Sat Oct 15 19:53:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10696_pi14-548_cl_pass0_src3.csv
[Sat Oct 15 19:53:58 2011] fullrun_ccd3_acisf10696_pi14-548_cl_pass0_src3_1.ximg exists
[Sat Oct 15 19:53:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10696_pi14-548_cl_pass0_src3.csv
[Sat Oct 15 19:53:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10696_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10696_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 19:53:59 2011] fullrun_ccd3_acisf10696_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sat Oct 15 19:53:59 2011] fullrun_ccd3_acisf10696_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Oct 15 19:53:59 2011] Fit fullrun_ccd3_acisf10696_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Oct 15 19:54:03 2011] Spatial fit model total counts = 105.539000, observed total counts = 106.000000
[Sat Oct 15 19:54:03 2011] Offset between fit and detection position for source 3 = 1.304545 pixels
[Sat Oct 15 19:54:03 2011] 106.494600 total counts/ 22.803500 bgd. counts: snr = 17.525827
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.304545 pixels
  Position = (1072.5, 647.7) = 18 25 56.71 -14 49 13.8
  Extent = 1.7 (1.3-2.0)", rotation angle = 0
  Source counts = 83.7 +/- 10.3
  Background counts = 22.8
  Rate = 0.002 +/- 0.0003
[Sat Oct 15 19:54:03 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 19:54:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 19:54:03 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 19:54:03 2011] Source does appear to be extended
[Sat Oct 15 19:54:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 19:54:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 19:54:11 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 15 19:54:11 2011] Initial guess for spatial extent in simple fitting = 1.65"
[Sat Oct 15 19:54:11 2011] source mask rpix=3.4, npix_max = 59, mask sum = 56, frac = 0.940
[Sat Oct 15 19:54:11 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.65"
[Sat Oct 15 19:54:13 2011] fullrun_ccd3_acisf10696_pi14-548_cl_pass1_src3.ximg exists
[Sat Oct 15 19:54:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10696_pi14-548_cl_pass1_src3.csv
[Sat Oct 15 19:54:13 2011] fullrun_ccd3_acisf10696_pi14-548_cl_pass1_src3_1.ximg exists
[Sat Oct 15 19:54:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10696_pi14-548_cl_pass1_src3.csv
[Sat Oct 15 19:54:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10696_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10696_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 19:54:13 2011] fullrun_ccd3_acisf10696_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sat Oct 15 19:54:13 2011] fullrun_ccd3_acisf10696_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Oct 15 19:54:13 2011] Fit fullrun_ccd3_acisf10696_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Oct 15 19:54:16 2011] Spatial fit model total counts = 96.665000, observed total counts = 97.000000
[Sat Oct 15 19:54:16 2011] Offset between fit and detection position for source 3 = 0.123891 pixels
[Sat Oct 15 19:54:16 2011] 97.275300 total counts/ 17.222500 bgd. counts: snr = 19.289831
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.123891 pixels
  Position = (1072.4, 647.8) = 18 25 56.71 -14 49 13.8
  Extent = 1.6 (1.2-2.0)", rotation angle = 0
  Source counts = 80.1 +/- 9.9
  Background counts = 17.2
  Rate = 0.002 +/- 0.0003
[Sat Oct 15 19:54:16 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 19:54:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 19:54:16 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 19:54:16 2011] Source does appear to be extended
[Sat Oct 15 19:54:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 19:54:21 2011] Not overwriting source region fullrun_ccd3_acisf10696_pi14-548_pass1_cl_src3_src.reg
[Sat Oct 15 19:54:21 2011] Extracting stamp from image fullrun_ccd3_acisf10696_pi14-548_cl_sm2.00.img.gz, (999, 574) - (1127, 722)
[Sat Oct 15 19:54:21 2011] Writing fullrun_ccd3_acisf10696_pi14-548_pass1_cl_src3.gif
[Sat Oct 15 19:54:30 2011] ../../acisf10696/products/events/fullrun_ccd3_acisf10696_pi14-548_pass1_cl_src3_src.evt and ../../acisf10696/products/events/fullrun_ccd3_acisf10696_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sat Oct 15 19:54:30 2011] Size of ../../acisf10696/products/events/fullrun_ccd3_acisf10696_pi14-548_pass1_cl_src3_src.evt.gz[events] = 107 counts
[Sat Oct 15 19:54:30 2011] Mean chipx,y = (988.06, 375.68)
[Sat Oct 15 19:54:30 2011] Mean tdetx,y = (4756.32, 4049.06)
[Sat Oct 15 19:54:30 2011] chipx,y range = (963.00-1012.00, 354.00-404.00)
[Sat Oct 15 19:54:30 2011] Size of ../../acisf10696/products/events/fullrun_ccd3_acisf10696_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 78 counts
[Sat Oct 15 19:54:30 2011] ../../acisf10696/products/images/fullrun_ccd3_acisf10696_pi14-548_pass1_cl_src3_src.img and ../../acisf10696/products/images/fullrun_ccd3_acisf10696_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Sat Oct 15 19:54:30 2011] ../../acisf10696/products/spectra/fullrun_ccd3_acisf10696_pi14-548_pass1_cl_src3_src.pi and ../../acisf10696/products/spectra/fullrun_ccd3_acisf10696_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sat Oct 15 19:54:30 2011] Not generating rmf since there are only 80 counts
[Sat Oct 15 19:54:33 2011] ../../acisf10696/products/lightcurves/fullrun_ccd3_acisf10696_pi14-548_pass1_cl_src3_src.lc and ../../acisf10696/products/lightcurves/fullrun_ccd3_acisf10696_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sat Oct 15 19:55:27 2011] 186.418
[Sat Oct 15 19:55:28 2011] Updating aperture counts using extracted products
[Sat Oct 15 19:55:28 2011] Error reading totcts from fullrun_ccd3_acisf10696_pi14-548_pass1_cl_src3_src.pi.gz
[Sat Oct 15 19:55:29 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 19:55:29 2011] Using photon index=1.80, rate=0.00212, arf fullrun_ccd3_acisf10696_pi14-548_pass1_cl_src3.arf
[Sat Oct 15 19:55:29 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 19:55:29 2011] Updating source flux to 3.2e-14
[Sat Oct 15 19:55:30 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting