[Sat Oct 15 19:53:37 2011] Detection parameters:
  Position = (531.4, 440.6) = 18 26 15.05 -14 50 55.5
  Extent = 0.5" x 0.5", rotation angle = 123 degrees
  Source counts = 4342.2 +/- 66.2
  Background counts = 38.8
  Rate = 0.1 +/- 0.002

[Sat Oct 15 19:53:38 2011] Off-axis axis estimate = 3.03'
[Sat Oct 15 19:53:58 2011] Using EEF radius (= 0.59 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 19:53:58 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 15 19:53:58 2011] Initial guess for spatial extent in simple fitting = 0.59"
[Sat Oct 15 19:53:58 2011] source mask rpix=1.2, npix_max = 11, mask sum = 6, frac = 0.525
[Sat Oct 15 19:53:58 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.59"
[Sat Oct 15 19:53:58 2011] fullrun_ccd3_acisf10696_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct 15 19:53:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10696_pi14-548_cl_pass0_src1.csv
[Sat Oct 15 19:53:58 2011] fullrun_ccd3_acisf10696_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct 15 19:53:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10696_pi14-548_cl_pass0_src1.csv
[Sat Oct 15 19:53:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10696_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10696_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 19:53:59 2011] fullrun_ccd3_acisf10696_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct 15 19:53:59 2011] fullrun_ccd3_acisf10696_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct 15 19:53:59 2011] Fit fullrun_ccd3_acisf10696_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct 15 19:54:03 2011] Spatial fit model total counts = 5443.410000, observed total counts = 5354.000000
[Sat Oct 15 19:54:03 2011] Offset between fit and detection position for source 1 = 0.772827 pixels
[Sat Oct 15 19:54:03 2011] 5448.552000 total counts/ 147.762000 bgd. counts: snr = 436.073021
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.772827 pixels
  Position = (531.6, 441.3) = 18 26 15.06 -14 50 55.4
  Extent = 0.7 (0.6-0.7)", rotation angle = 0
  Source counts = 5300.8 +/- 73.8
  Background counts = 147.8
  Rate = 0.1 +/- 0.002
[Sat Oct 15 19:54:03 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 19:54:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 19:54:03 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 19:54:03 2011] Source does appear to be extended
[Sat Oct 15 19:54:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 19:54:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 19:54:11 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 15 19:54:11 2011] Initial guess for spatial extent in simple fitting = 0.65"
[Sat Oct 15 19:54:11 2011] source mask rpix=1.3, npix_max = 13, mask sum = 8, frac = 0.597
[Sat Oct 15 19:54:11 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.65"
[Sat Oct 15 19:54:13 2011] fullrun_ccd3_acisf10696_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct 15 19:54:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10696_pi14-548_cl_pass1_src1.csv
[Sat Oct 15 19:54:13 2011] fullrun_ccd3_acisf10696_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct 15 19:54:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10696_pi14-548_cl_pass1_src1.csv
[Sat Oct 15 19:54:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10696_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10696_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 19:54:13 2011] fullrun_ccd3_acisf10696_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct 15 19:54:13 2011] fullrun_ccd3_acisf10696_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct 15 19:54:13 2011] Fit fullrun_ccd3_acisf10696_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct 15 19:54:16 2011] Spatial fit model total counts = 5449.060000, observed total counts = 5352.000000
[Sat Oct 15 19:54:16 2011] Offset between fit and detection position for source 1 = 0.006365 pixels
[Sat Oct 15 19:54:16 2011] 5451.738000 total counts/ 137.668000 bgd. counts: snr = 452.908811
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.006365 pixels
  Position = (531.6, 441.3) = 18 26 15.06 -14 50 55.4
  Extent = 0.7 (0.6-0.7)", rotation angle = 0
  Source counts = 5314.1 +/- 73.8
  Background counts = 137.7
  Rate = 0.1 +/- 0.002
[Sat Oct 15 19:54:16 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 19:54:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 19:54:16 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 19:54:16 2011] Source does appear to be extended
[Sat Oct 15 19:54:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 19:54:21 2011] Not overwriting source region fullrun_ccd3_acisf10696_pi14-548_pass1_cl_src1_src.reg
[Sat Oct 15 19:54:21 2011] Extracting stamp from image fullrun_ccd3_acisf10696_pi14-548_cl_sm2.00.img.gz, (502, 411) - (562, 471)
[Sat Oct 15 19:54:21 2011] Writing fullrun_ccd3_acisf10696_pi14-548_pass1_cl_src1.gif
[Sat Oct 15 19:54:24 2011] ../../acisf10696/products/events/fullrun_ccd3_acisf10696_pi14-548_pass1_cl_src1_src.evt and ../../acisf10696/products/events/fullrun_ccd3_acisf10696_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Oct 15 19:54:24 2011] Size of ../../acisf10696/products/events/fullrun_ccd3_acisf10696_pi14-548_pass1_cl_src1_src.evt.gz[events] = 5278 counts
[Sat Oct 15 19:54:24 2011] Mean chipx,y = (474.46, 652.25)
[Sat Oct 15 19:54:24 2011] Mean tdetx,y = (4479.75, 3535.46)
[Sat Oct 15 19:54:24 2011] chipx,y range = (454.00-499.00, 633.00-673.00)
[Sat Oct 15 19:54:24 2011] Size of ../../acisf10696/products/events/fullrun_ccd3_acisf10696_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 127 counts
[Sat Oct 15 19:54:24 2011] ../../acisf10696/products/images/fullrun_ccd3_acisf10696_pi14-548_pass1_cl_src1_src.img and ../../acisf10696/products/images/fullrun_ccd3_acisf10696_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Oct 15 19:54:24 2011] ../../acisf10696/products/spectra/fullrun_ccd3_acisf10696_pi14-548_pass1_cl_src1_src.pi and ../../acisf10696/products/spectra/fullrun_ccd3_acisf10696_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sat Oct 15 19:54:27 2011] ../../acisf10696/products/lightcurves/fullrun_ccd3_acisf10696_pi14-548_pass1_cl_src1_src.lc and ../../acisf10696/products/lightcurves/fullrun_ccd3_acisf10696_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Oct 15 19:55:27 2011] Keeping rmf generated by specextract
[Sat Oct 15 19:55:27 2011] 190.541
[Sat Oct 15 19:55:28 2011] Updating aperture counts using extracted products
[Sat Oct 15 19:55:28 2011] Error reading totcts from fullrun_ccd3_acisf10696_pi14-548_pass1_cl_src1_src.pi.gz
[Sat Oct 15 19:55:28 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 19:55:28 2011] Using photon index=1.80, rate=0.14, arf fullrun_ccd3_acisf10696_pi14-548_pass1_cl_src1.arf
[Sat Oct 15 19:55:28 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 19:55:28 2011] Updating source flux to 2.1e-12
[Sat Oct 15 19:55:40 2011] Reading fit data from acisf10696/analysis//spectral/fullrun_ccd3_acisf10696_pi14-548_pass1_cl_src1_pl.csv
[Sat Oct 15 19:55:40 2011] Spectral fit parameter nH value = 5.83011e+21
[Sat Oct 15 19:55:40 2011] Spectral fit parameter PhoIndex value = 1.40083
[Sat Oct 15 19:55:40 2011] Failed to get F(0.3-8.0) from acisf10696/analysis//spectral/fullrun_ccd3_acisf10696_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Oct 15 19:55:40 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 19:55:40 2011] Using Nh = 5.8e+21, photon index=1.40, rate=0.14, arf fullrun_ccd3_acisf10696_pi14-548_pass1_cl_src1.arf
[Sat Oct 15 19:55:40 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 19:55:40 2011] Updating source flux to 2.3e-12