[Wed Oct  5 18:39:11 2011] Detection parameters:
  Position = (927.3, 365.9) = 11 32 38.57 -53 13 59.3
  Extent = 0.8" x 0.5", rotation angle = 124 degrees
  Source counts = 17.7 +/- 4.2
  Background counts = 0.3
  Rate = 0.002 +/- 0.0004

[Wed Oct  5 18:39:12 2011] Off-axis axis estimate = 4.07'
[Wed Oct  5 18:40:04 2011] Using EEF radius (= 0.85 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 18:40:04 2011] Initial guess for spatial extent in simple fitting = 0.85"
[Wed Oct  5 18:40:04 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.008
[Wed Oct  5 18:40:04 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 0.85"
[Wed Oct  5 18:40:04 2011] fullrun_ccd3_acisf10687_pi14-548_cl_pass0_src2.ximg exists
[Wed Oct  5 18:40:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10687_pi14-548_cl_pass0_src2.csv
[Wed Oct  5 18:40:04 2011] fullrun_ccd3_acisf10687_pi14-548_cl_pass0_src2_1.ximg exists
[Wed Oct  5 18:40:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10687_pi14-548_cl_pass0_src2.csv
[Wed Oct  5 18:40:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10687_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10687_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 18:40:04 2011] fullrun_ccd3_acisf10687_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Wed Oct  5 18:40:04 2011] fullrun_ccd3_acisf10687_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Oct  5 18:40:04 2011] Fit fullrun_ccd3_acisf10687_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Oct  5 18:40:11 2011] Spatial fit model total counts = 18.293400, observed total counts = 19.000000
[Wed Oct  5 18:40:11 2011] Offset between fit and detection position for source 23 = 0.920620 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.920620 pixels
  Position = (927.6, 366.8) = 11 32 38.58 -53 13 59.1
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source counts = 18.3 +/- 4.3
  Background counts = 0.0
  Rate = 0.002 +/- 0.0004
[Wed Oct  5 18:40:11 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 18:40:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 18:40:11 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 18:40:11 2011] Source does appear to be extended
[Wed Oct  5 18:40:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 18:40:35 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 18:40:35 2011] Initial guess for spatial extent in simple fitting = 0.82"
[Wed Oct  5 18:40:35 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.065
[Wed Oct  5 18:40:35 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.82"
[Wed Oct  5 18:40:35 2011] fullrun_ccd3_acisf10687_pi14-548_cl_pass1_src2.ximg exists
[Wed Oct  5 18:40:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10687_pi14-548_cl_pass1_src2.csv
[Wed Oct  5 18:40:35 2011] fullrun_ccd3_acisf10687_pi14-548_cl_pass1_src2_1.ximg exists
[Wed Oct  5 18:40:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10687_pi14-548_cl_pass1_src2.csv
[Wed Oct  5 18:40:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10687_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10687_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 18:40:36 2011] fullrun_ccd3_acisf10687_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Wed Oct  5 18:40:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10687_pi14-548_cl_pass1_tfrozen_src2.csv
[Wed Oct  5 18:40:36 2011] fullrun_ccd3_acisf10687_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Oct  5 18:40:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10687_pi14-548_cl_pass1_tfrozen_src2.csv
[Wed Oct  5 18:40:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10687_pi14-548_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10687_pi14-548_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 18:40:45 2011] Spatial fit model total counts = 17.277500, observed total counts = 19.000000
[Wed Oct  5 18:40:45 2011] Offset between fit and detection position for source 23 = 0.029121 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.029121 pixels
  Position = (927.6, 366.7) = 11 32 38.58 -53 13 59.1
  Extent = 1.1 (0.8-1.6)" x 0.5 (0.4-0.7)", rotation angle = 51 (30-72) degrees
  Source counts = 17.4 +/- 4.2
  Background counts = 0.0
  Rate = 0.002 +/- 0.0004
[Wed Oct  5 18:40:45 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 18:40:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 18:40:45 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 18:40:45 2011] Source does appear to be extended
[Wed Oct  5 18:40:45 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.09
[Wed Oct  5 18:42:11 2011] Not overwriting source region fullrun_ccd3_acisf10687_pi14-548_pass1_cl_src23_src.reg
[Wed Oct  5 18:42:11 2011] Extracting stamp from image fullrun_ccd3_acisf10687_pi14-548_cl_sm2.00.img.gz, (878, 317) - (977, 417)
[Wed Oct  5 18:42:11 2011] Writing fullrun_ccd3_acisf10687_pi14-548_pass1_cl_src23.gif
[Wed Oct  5 18:42:17 2011] ../../acisf10687/products/events/fullrun_ccd3_acisf10687_pi14-548_pass1_cl_src23_src.evt and ../../acisf10687/products/events/fullrun_ccd3_acisf10687_pi14-548_pass1_cl_src23_bgd.evt exist, delete to re-create
[Wed Oct  5 18:42:17 2011] Size of ../../acisf10687/products/events/fullrun_ccd3_acisf10687_pi14-548_pass1_cl_src23_src.evt.gz[events] = 17 counts
[Wed Oct  5 18:42:17 2011] Mean chipx,y = (469.35, 917.71)
[Wed Oct  5 18:42:17 2011] Mean tdetx,y = (4214.29, 3530.35)
[Wed Oct  5 18:42:17 2011] chipx,y range = (450.00-483.00, 900.00-932.00)
[Wed Oct  5 18:42:17 2011] Size of ../../acisf10687/products/events/fullrun_ccd3_acisf10687_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 6 counts
[Wed Oct  5 18:42:17 2011] ../../acisf10687/products/images/fullrun_ccd3_acisf10687_pi14-548_pass1_cl_src23_src.img and ../../acisf10687/products/images/fullrun_ccd3_acisf10687_pi14-548_pass1_cl_src23_bgd.img exist, delete to re-create
[Wed Oct  5 18:42:17 2011] ../../acisf10687/products/spectra/fullrun_ccd3_acisf10687_pi14-548_pass1_cl_src23_src.pi and ../../acisf10687/products/spectra/fullrun_ccd3_acisf10687_pi14-548_pass1_cl_src23_bgd.pi exist, delete to re-create
[Wed Oct  5 18:42:17 2011] Not generating rmf since there are only 17 counts
[Wed Oct  5 18:42:20 2011] ../../acisf10687/products/lightcurves/fullrun_ccd3_acisf10687_pi14-548_pass1_cl_src23_src.lc and ../../acisf10687/products/lightcurves/fullrun_ccd3_acisf10687_pi14-548_pass1_cl_src23_bgd.lc exist, delete to re-create
[Wed Oct  5 18:43:23 2011] 180.465
[Wed Oct  5 18:43:28 2011] Updating aperture counts using extracted products
[Wed Oct  5 18:43:28 2011] Error reading totcts from fullrun_ccd3_acisf10687_pi14-548_pass1_cl_src23_src.pi.gz
[Wed Oct  5 18:43:28 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 18:43:28 2011] Using photon index=1.80, rate=0.00173, arf fullrun_ccd3_acisf10687_pi14-548_pass1_cl_src23.arf
[Wed Oct  5 18:43:28 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 18:43:28 2011] Updating source flux to 2.1e-14
[Wed Oct  5 18:43:34 2011] Source 23 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Oct  5 18:43:35 2011] acisf10687/analysis//spectral/fullrun_ccd3_acisf10687_pi14-548_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete