[Wed Oct  5 18:39:07 2011] Detection parameters:
  Position = (736.1, 917.0) = 11 32 12.39 -53 16 5.8
  Extent = 0.7" x 0.5", rotation angle = 154 degrees
  Source counts = 28.6 +/- 5.4
  Background counts = 0.4
  Rate = 0.003 +/- 0.0005

[Wed Oct  5 18:39:07 2011] Off-axis axis estimate = 3.98'
[Wed Oct  5 18:40:03 2011] Using EEF radius (= 0.82 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 18:40:03 2011] Initial guess for spatial extent in simple fitting = 0.82"
[Wed Oct  5 18:40:03 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Wed Oct  5 18:40:03 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 0.82"
[Wed Oct  5 18:40:03 2011] fullrun_ccd2_acisf10687_pi14-548_cl_pass0_src2.ximg exists
[Wed Oct  5 18:40:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10687_pi14-548_cl_pass0_src2.csv
[Wed Oct  5 18:40:04 2011] fullrun_ccd2_acisf10687_pi14-548_cl_pass0_src2_1.ximg exists
[Wed Oct  5 18:40:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10687_pi14-548_cl_pass0_src2.csv
[Wed Oct  5 18:40:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10687_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10687_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 18:40:04 2011] fullrun_ccd2_acisf10687_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Wed Oct  5 18:40:04 2011] fullrun_ccd2_acisf10687_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Oct  5 18:40:04 2011] Fit fullrun_ccd2_acisf10687_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Oct  5 18:40:10 2011] Spatial fit model total counts = 28.545200, observed total counts = 33.000000
[Wed Oct  5 18:40:10 2011] Offset between fit and detection position for source 9 = 0.625076 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.625076 pixels
  Position = (736.7, 917.2) = 11 32 12.38 -53 16 5.9
  Extent = 0.9 (1.0-1.0)" x 0.6 (0.3-0.7)", rotation angle = 0
  Source counts = 29.1 +/- 5.4
  Background counts = 0.0
  Rate = 0.003 +/- 0.0005
[Wed Oct  5 18:40:10 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 18:40:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 18:40:10 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 18:40:10 2011] Source does appear to be extended
[Wed Oct  5 18:40:10 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.34
[Wed Oct  5 18:40:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 18:40:34 2011] Initial guess for spatial extent in simple fitting = 0.77"
[Wed Oct  5 18:40:34 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.935
[Wed Oct  5 18:40:34 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.77"
[Wed Oct  5 18:40:34 2011] fullrun_ccd2_acisf10687_pi14-548_cl_pass1_src2.ximg exists
[Wed Oct  5 18:40:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10687_pi14-548_cl_pass1_src2.csv
[Wed Oct  5 18:40:34 2011] fullrun_ccd2_acisf10687_pi14-548_cl_pass1_src2_1.ximg exists
[Wed Oct  5 18:40:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10687_pi14-548_cl_pass1_src2.csv
[Wed Oct  5 18:40:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10687_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10687_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 18:40:34 2011] fullrun_ccd2_acisf10687_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Wed Oct  5 18:40:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10687_pi14-548_cl_pass1_tfrozen_src2.csv
[Wed Oct  5 18:40:35 2011] fullrun_ccd2_acisf10687_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Oct  5 18:40:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10687_pi14-548_cl_pass1_tfrozen_src2.csv
[Wed Oct  5 18:40:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10687_pi14-548_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10687_pi14-548_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 18:40:44 2011] Spatial fit model total counts = 28.605200, observed total counts = 33.000000
[Wed Oct  5 18:40:44 2011] Offset between fit and detection position for source 9 = 0.176349 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.176349 pixels
  Position = (736.8, 917.4) = 11 32 12.38 -53 16 5.9
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source counts = 29.0 +/- 5.4
  Background counts = 0.0
  Rate = 0.003 +/- 0.0005
[Wed Oct  5 18:40:44 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 18:40:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 18:40:44 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 18:40:44 2011] Source does appear to be extended
[Wed Oct  5 18:40:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 18:41:39 2011] Not overwriting source region fullrun_ccd2_acisf10687_pi14-548_pass1_cl_src9_src.reg
[Wed Oct  5 18:41:39 2011] Extracting stamp from image fullrun_ccd2_acisf10687_pi14-548_cl_sm2.00.img.gz, (698, 879) - (776, 956)
[Wed Oct  5 18:41:39 2011] Writing fullrun_ccd2_acisf10687_pi14-548_pass1_cl_src9.gif
[Wed Oct  5 18:41:43 2011] ../../acisf10687/products/events/fullrun_ccd2_acisf10687_pi14-548_pass1_cl_src9_src.evt and ../../acisf10687/products/events/fullrun_ccd2_acisf10687_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Wed Oct  5 18:41:43 2011] Size of ../../acisf10687/products/events/fullrun_ccd2_acisf10687_pi14-548_pass1_cl_src9_src.evt.gz[events] = 30 counts
[Wed Oct  5 18:41:43 2011] Mean chipx,y = (357.63, 648.17)
[Wed Oct  5 18:41:43 2011] Mean tdetx,y = (3709.17, 3728.37)
[Wed Oct  5 18:41:43 2011] chipx,y range = (340.00-373.00, 631.00-668.00)
[Wed Oct  5 18:41:43 2011] Size of ../../acisf10687/products/events/fullrun_ccd2_acisf10687_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 7 counts
[Wed Oct  5 18:41:43 2011] ../../acisf10687/products/images/fullrun_ccd2_acisf10687_pi14-548_pass1_cl_src9_src.img and ../../acisf10687/products/images/fullrun_ccd2_acisf10687_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Wed Oct  5 18:41:43 2011] ../../acisf10687/products/spectra/fullrun_ccd2_acisf10687_pi14-548_pass1_cl_src9_src.pi and ../../acisf10687/products/spectra/fullrun_ccd2_acisf10687_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Wed Oct  5 18:41:43 2011] Not generating rmf since there are only 28 counts
[Wed Oct  5 18:41:46 2011] ../../acisf10687/products/lightcurves/fullrun_ccd2_acisf10687_pi14-548_pass1_cl_src9_src.lc and ../../acisf10687/products/lightcurves/fullrun_ccd2_acisf10687_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Wed Oct  5 18:42:11 2011] 187.117
[Wed Oct  5 18:43:28 2011] Updating aperture counts using extracted products
[Wed Oct  5 18:43:28 2011] Error reading totcts from fullrun_ccd2_acisf10687_pi14-548_pass1_cl_src9_src.pi.gz
[Wed Oct  5 18:43:28 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 18:43:28 2011] Using photon index=1.80, rate=0.00289, arf fullrun_ccd2_acisf10687_pi14-548_pass1_cl_src9.arf
[Wed Oct  5 18:43:28 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 18:43:28 2011] Updating source flux to 3.4e-14
[Wed Oct  5 18:43:33 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Oct  5 18:43:34 2011] acisf10687/analysis//spectral/fullrun_ccd2_acisf10687_pi14-548_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete