[Sun Sep 25 22:59:07 2011] Detection parameters: Position = (440.3, 818.1) = 18 45 56.99 -2 32 4.6 Extent = 1.2" x 0.8", rotation angle = 127 degrees Source counts = 195.1 +/- 14.6 Background counts = 17.9 Rate = 0.007 +/- 0.0005 [Sun Sep 25 22:59:08 2011] Off-axis axis estimate = 6.98' [Sun Sep 25 23:00:08 2011] Using EEF radius (= 2.17 ")to estimate initial spatial extent for simple fitting [Sun Sep 25 23:00:08 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun Sep 25 23:00:08 2011] Initial guess for spatial extent in simple fitting = 2.17" [Sun Sep 25 23:00:08 2011] source mask rpix=4.4, npix_max = 96, mask sum = 100, frac = 1.040 [Sun Sep 25 23:00:08 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.17" [Sun Sep 25 23:00:09 2011] fullrun_ccd2_acisf10681_pi14-548_cl_pass0_src1.ximg exists [Sun Sep 25 23:00:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10681_pi14-548_cl_pass0_src1.csv [Sun Sep 25 23:00:09 2011] fullrun_ccd2_acisf10681_pi14-548_cl_pass0_src1_1.ximg exists [Sun Sep 25 23:00:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10681_pi14-548_cl_pass0_src1.csv [Sun Sep 25 23:00:09 2011] It looks like the fit did not converge You should probably delete fullrun_ccd2_acisf10681_pi14-548_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd2_acisf10681_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Sep 25 23:00:09 2011] fullrun_ccd2_acisf10681_pi14-548_cl_pass0_tfrozen_src1.ximg exists [Sun Sep 25 23:00:09 2011] fullrun_ccd2_acisf10681_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists [Sun Sep 25 23:00:09 2011] Fit fullrun_ccd2_acisf10681_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly [Sun Sep 25 23:00:28 2011] Spatial fit model total counts = 223.998000, observed total counts = 224.000000 [Sun Sep 25 23:00:28 2011] Offset between fit and detection position for source 2 = 0.750744 pixels [Sun Sep 25 23:00:28 2011] 224.602400 total counts/ 65.759400 bgd. counts: snr = 19.587958 Spatial fit parameters: Offset between fit and detection position for source 2 = 0.750744 pixels Position = (440.9, 818.4) = 18 45 56.99 -2 32 4.6 Extent = 1.7 (1.4-2.0)", rotation angle = 0 Source counts = 158.8 +/- 15.0 Background counts = 65.8 Rate = 0.006 +/- 0.0005 [Sun Sep 25 23:00:28 2011] Vigneting correction estimate = 1.000000 [Sun Sep 25 23:00:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Sep 25 23:00:28 2011] Assessing source extent using major axis lower bound [Sun Sep 25 23:00:28 2011] Source does appear to be extended [Sun Sep 25 23:00:28 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Sep 25 23:00:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting [Sun Sep 25 23:00:54 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun Sep 25 23:00:54 2011] Initial guess for spatial extent in simple fitting = 1.74" [Sun Sep 25 23:00:54 2011] source mask rpix=3.5, npix_max = 65, mask sum = 64, frac = 0.978 [Sun Sep 25 23:00:54 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.74" [Sun Sep 25 23:00:59 2011] fullrun_ccd2_acisf10681_pi14-548_cl_pass1_src1.ximg exists [Sun Sep 25 23:00:59 2011] fullrun_ccd2_acisf10681_pi14-548_cl_pass1_src1_1.ximg exists [Sun Sep 25 23:00:59 2011] Fit fullrun_ccd2_acisf10681_pi14-548_cl_pass1_src1 appears to have run properly [Sun Sep 25 23:01:00 2011] fullrun_ccd2_acisf10681_pi14-548_cl_pass1_tfrozen_src1.ximg exists [Sun Sep 25 23:01:00 2011] fullrun_ccd2_acisf10681_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists [Sun Sep 25 23:01:00 2011] Fit fullrun_ccd2_acisf10681_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly [Sun Sep 25 23:01:10 2011] Spatial fit model total counts = 208.963000, observed total counts = 209.000000 [Sun Sep 25 23:01:10 2011] Offset between fit and detection position for source 2 = 0.141239 pixels [Sun Sep 25 23:01:10 2011] 209.259900 total counts/ 59.285900 bgd. counts: snr = 19.477816 Spatial fit parameters: Offset between fit and detection position for source 2 = 0.141239 pixels Position = (441.1, 818.3) = 18 45 56.98 -2 32 4.7 Extent = 1.6 (1.3-2.0)", rotation angle = 0 Source counts = 150.0 +/- 14.5 Background counts = 59.3 Rate = 0.005 +/- 0.0005 [Sun Sep 25 23:01:10 2011] Vigneting correction estimate = 1.000000 [Sun Sep 25 23:01:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Sep 25 23:01:10 2011] Assessing source extent using major axis lower bound [Sun Sep 25 23:01:10 2011] Source does appear to be extended [Sun Sep 25 23:01:10 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Sep 25 23:03:34 2011] Not overwriting source region fullrun_ccd2_acisf10681_pi14-548_pass1_cl_src2_src.reg [Sun Sep 25 23:03:34 2011] Extracting stamp from image fullrun_ccd2_acisf10681_pi14-548_cl_sm2.00.img.gz, (367, 744) - (515, 893) [Sun Sep 25 23:03:34 2011] Writing fullrun_ccd2_acisf10681_pi14-548_pass1_cl_src2.gif [Sun Sep 25 23:03:35 2011] ../../acisf10681/products/events/fullrun_ccd2_acisf10681_pi14-548_pass1_cl_src2_src.evt and ../../acisf10681/products/events/fullrun_ccd2_acisf10681_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create [Sun Sep 25 23:03:35 2011] Size of ../../acisf10681/products/events/fullrun_ccd2_acisf10681_pi14-548_pass1_cl_src2_src.evt.gz[events] = 194 counts [Sun Sep 25 23:03:35 2011] Mean chipx,y = (400.46, 261.26) [Sun Sep 25 23:03:35 2011] Mean tdetx,y = (3322.26, 3685.54) [Sun Sep 25 23:03:35 2011] chipx,y range = (377.00-429.00, 237.00-286.00) [Sun Sep 25 23:03:35 2011] Size of ../../acisf10681/products/events/fullrun_ccd2_acisf10681_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 57 counts [Sun Sep 25 23:03:35 2011] ../../acisf10681/products/images/fullrun_ccd2_acisf10681_pi14-548_pass1_cl_src2_src.img and ../../acisf10681/products/images/fullrun_ccd2_acisf10681_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create [Sun Sep 25 23:03:35 2011] ../../acisf10681/products/spectra/fullrun_ccd2_acisf10681_pi14-548_pass1_cl_src2_src.pi and ../../acisf10681/products/spectra/fullrun_ccd2_acisf10681_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create [Sun Sep 25 23:03:38 2011] ../../acisf10681/products/lightcurves/fullrun_ccd2_acisf10681_pi14-548_pass1_cl_src2_src.lc and ../../acisf10681/products/lightcurves/fullrun_ccd2_acisf10681_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create [Sun Sep 25 23:04:10 2011] Keeping rmf generated by specextract [Sun Sep 25 23:04:11 2011] 171.75 [Sun Sep 25 23:05:47 2011] Updating aperture counts using extracted products [Sun Sep 25 23:05:47 2011] Error reading totcts from fullrun_ccd2_acisf10681_pi14-548_pass1_cl_src2_src.pi.gz [Sun Sep 25 23:05:47 2011] Calculating source flux in energy range 0.30-8.00 [Sun Sep 25 23:05:47 2011] Using photon index=1.80, rate=0.00545, arf fullrun_ccd2_acisf10681_pi14-548_pass1_cl_src2.arf [Sun Sep 25 23:05:47 2011] Assuming count rate is from the 0.20-8.00 bandpass [Sun Sep 25 23:05:47 2011] Updating source flux to 1.1e-13 [Sun Sep 25 23:05:57 2011] Reading fit data from acisf10681/analysis//spectral/fullrun_ccd2_acisf10681_pi14-548_pass1_cl_src2_pl.csv [Sun Sep 25 23:05:57 2011] Spectral fit parameter nH value = 4.23977e+22 [Sun Sep 25 23:05:57 2011] Spectral fit parameter PhoIndex value = 1.89277 [Sun Sep 25 23:05:57 2011] Failed to get F(0.3-8.0) from acisf10681/analysis//spectral/fullrun_ccd2_acisf10681_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected [Sun Sep 25 23:05:57 2011] Calculating source flux in energy range 0.30-8.00 [Sun Sep 25 23:05:57 2011] Using Nh = 4.2e+22, photon index=1.89, rate=0.00545, arf fullrun_ccd2_acisf10681_pi14-548_pass1_cl_src2.arf [Sun Sep 25 23:05:57 2011] Assuming count rate is from the 0.20-8.00 bandpass [Sun Sep 25 23:05:57 2011] Updating source flux to 1.4e-13