[Tue Mar 13 10:18:36 2012] Detection parameters:
  Position = (693.6, 399.7) = 2 25 5.74 -24 47 1.8
  Extent = 0.6" x 0.5", rotation angle = 10 degrees
  Source counts = 47.3 +/- 7.2
  Background counts = 4.7
  Rate = 0.002 +/- 0.0002

[Tue Mar 13 10:18:38 2012] Off-axis axis estimate = 0.58'
[Tue Mar 13 10:19:04 2012] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 10:19:04 2012] Initial guess for spatial extent in simple fitting = 0.39"
[Tue Mar 13 10:19:04 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.351
[Tue Mar 13 10:19:04 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 0.39"
[Tue Mar 13 10:19:06 2012] fullrun_ccd7_acisf10563_pi14-548_cl_pass0_src11.ximg exists
[Tue Mar 13 10:19:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10563_pi14-548_cl_pass0_src11.csv
[Tue Mar 13 10:19:06 2012] fullrun_ccd7_acisf10563_pi14-548_cl_pass0_src11_1.ximg exists
[Tue Mar 13 10:19:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10563_pi14-548_cl_pass0_src11.csv
[Tue Mar 13 10:19:06 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10563_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10563_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 10:19:08 2012] fullrun_ccd7_acisf10563_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Tue Mar 13 10:19:08 2012] fullrun_ccd7_acisf10563_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Tue Mar 13 10:19:08 2012] Fit fullrun_ccd7_acisf10563_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Tue Mar 13 10:19:16 2012] Spatial fit model total counts = 61.000000, observed total counts = 61.000000
[Tue Mar 13 10:19:16 2012] Offset between fit and detection position for source 5 = 0.547300 pixels
[Tue Mar 13 10:19:16 2012] 60.562400 total counts/ 16.015000 bgd. counts: snr = 11.131633
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.547300 pixels
  Position = (693.8, 400.3) = 2 25 5.75 -24 47 1.8
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 44.5 +/- 7.8
  Background counts = 16.0
  Rate = 0.001 +/- 0.0003
[Tue Mar 13 10:19:16 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 10:19:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 10:19:16 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 10:19:16 2012] Source does appear to be extended
[Tue Mar 13 10:19:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 10:19:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 10:19:23 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Tue Mar 13 10:19:23 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.914
[Tue Mar 13 10:19:23 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 0.38"
[Tue Mar 13 10:19:24 2012] fullrun_ccd7_acisf10563_pi14-548_cl_pass1_src11.ximg exists
[Tue Mar 13 10:19:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10563_pi14-548_cl_pass1_src11.csv
[Tue Mar 13 10:19:24 2012] fullrun_ccd7_acisf10563_pi14-548_cl_pass1_src11_1.ximg exists
[Tue Mar 13 10:19:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10563_pi14-548_cl_pass1_src11.csv
[Tue Mar 13 10:19:24 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10563_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10563_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 10:19:24 2012] fullrun_ccd7_acisf10563_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Tue Mar 13 10:19:24 2012] fullrun_ccd7_acisf10563_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Mar 13 10:19:24 2012] Fit fullrun_ccd7_acisf10563_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Tue Mar 13 10:19:30 2012] Spatial fit model total counts = 61.000000, observed total counts = 61.000000
[Tue Mar 13 10:19:30 2012] Offset between fit and detection position for source 5 = 0.000000 pixels
[Tue Mar 13 10:19:30 2012] 60.562400 total counts/ 16.015000 bgd. counts: snr = 11.131633
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.000000 pixels
  Position = (693.8, 400.3) = 2 25 5.75 -24 47 1.8
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 44.5 +/- 7.8
  Background counts = 16.0
  Rate = 0.001 +/- 0.0003
[Tue Mar 13 10:19:30 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 10:19:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 10:19:30 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 10:19:30 2012] Source does appear to be extended
[Tue Mar 13 10:19:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 10:19:49 2012] Not overwriting source region fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src5_src.reg
[Tue Mar 13 10:19:49 2012] Extracting stamp from image fullrun_ccd7_acisf10563_pi14-548_cl_sm2.00.img.gz, (676, 383) - (711, 418)
[Tue Mar 13 10:19:49 2012] Writing fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src5.gif
[Tue Mar 13 10:20:22 2012] ../../acisf10563/products/events/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src5_src.evt and ../../acisf10563/products/events/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Tue Mar 13 10:20:22 2012] Size of ../../acisf10563/products/events/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src5_src.evt.gz[events] = 46 counts
[Tue Mar 13 10:20:22 2012] Mean chipx,y = (261.28, 490.83)
[Tue Mar 13 10:20:22 2012] Mean tdetx,y = (4178.28, 2192.83)
[Tue Mar 13 10:20:22 2012] chipx,y range = (246.00-279.00, 472.00-508.00)
[Tue Mar 13 10:20:22 2012] Size of ../../acisf10563/products/events/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 21 counts
[Tue Mar 13 10:20:22 2012] ../../acisf10563/products/images/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src5_src.img and ../../acisf10563/products/images/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Tue Mar 13 10:20:22 2012] ../../acisf10563/products/spectra/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src5_src.pi and ../../acisf10563/products/spectra/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Tue Mar 13 10:20:22 2012] Not generating rmf since there are only 44 counts
[Tue Mar 13 10:20:25 2012] ../../acisf10563/products/lightcurves/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src5_src.lc and ../../acisf10563/products/lightcurves/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Tue Mar 13 10:21:32 2012] 225.386
[Tue Mar 13 10:21:34 2012] Updating aperture counts using extracted products
[Tue Mar 13 10:21:34 2012] Error reading totcts from fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src5_src.pi.gz
[Tue Mar 13 10:21:34 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 10:21:34 2012] Using photon index=1.80, rate=0.0015, arf fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src5.arf
[Tue Mar 13 10:21:34 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Mar 13 10:21:34 2012] Updating source flux to 1.2e-14
[Tue Mar 13 10:21:40 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting