[Tue Mar 13 10:18:38 2012] Detection parameters:
  Position = (708.0, 391.2) = 2 25 5.22 -24 47 6.0
  Extent = 0.7" x 0.5", rotation angle = 30 degrees
  Source counts = 16.8 +/- 4.6
  Background counts = 4.2
  Rate = 0.0006 +/- 0.0002

[Tue Mar 13 10:18:38 2012] Off-axis axis estimate = 0.48'
[Tue Mar 13 10:19:04 2012] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 10:19:04 2012] Initial guess for spatial extent in simple fitting = 0.39"
[Tue Mar 13 10:19:04 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.887
[Tue Mar 13 10:19:04 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 0.39"
[Tue Mar 13 10:19:07 2012] fullrun_ccd7_acisf10563_pi14-548_cl_pass0_src25.ximg exists
[Tue Mar 13 10:19:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10563_pi14-548_cl_pass0_src25.csv
[Tue Mar 13 10:19:07 2012] fullrun_ccd7_acisf10563_pi14-548_cl_pass0_src25_1.ximg exists
[Tue Mar 13 10:19:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10563_pi14-548_cl_pass0_src25.csv
[Tue Mar 13 10:19:07 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10563_pi14-548_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10563_pi14-548_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 10:19:08 2012] fullrun_ccd7_acisf10563_pi14-548_cl_pass0_tfrozen_src25.ximg exists
[Tue Mar 13 10:19:08 2012] fullrun_ccd7_acisf10563_pi14-548_cl_pass0_tfrozen_src25_1.ximg exists
[Tue Mar 13 10:19:08 2012] Fit fullrun_ccd7_acisf10563_pi14-548_cl_pass0_tfrozen_src25 appears to have run properly
[Tue Mar 13 10:19:16 2012] Spatial fit model total counts = 33.143900, observed total counts = 34.000000
[Tue Mar 13 10:19:16 2012] Offset between fit and detection position for source 29 = 1.256326 pixels
[Tue Mar 13 10:19:16 2012] 32.240300 total counts/ 19.765300 bgd. counts: snr = 2.806008
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 1.256326 pixels
  Position = (708.9, 392.1) = 2 25 5.20 -24 47 5.8
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 12.5 +/- 5.7
  Background counts = 19.8
  Rate = 0.0004 +/- 0.0002
[Tue Mar 13 10:19:16 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 10:19:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 10:19:16 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 10:19:16 2012] Source does appear to be extended
[Tue Mar 13 10:19:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 10:19:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 10:19:23 2012] Initial guess for spatial extent in simple fitting = 0.45"
[Tue Mar 13 10:19:23 2012] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.753
[Tue Mar 13 10:19:23 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 0.45"
[Tue Mar 13 10:19:24 2012] fullrun_ccd7_acisf10563_pi14-548_cl_pass1_src25.ximg exists
[Tue Mar 13 10:19:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10563_pi14-548_cl_pass1_src25.csv
[Tue Mar 13 10:19:24 2012] fullrun_ccd7_acisf10563_pi14-548_cl_pass1_src25_1.ximg exists
[Tue Mar 13 10:19:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10563_pi14-548_cl_pass1_src25.csv
[Tue Mar 13 10:19:24 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10563_pi14-548_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10563_pi14-548_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 10:19:25 2012] fullrun_ccd7_acisf10563_pi14-548_cl_pass1_tfrozen_src25.ximg exists
[Tue Mar 13 10:19:25 2012] fullrun_ccd7_acisf10563_pi14-548_cl_pass1_tfrozen_src25_1.ximg exists
[Tue Mar 13 10:19:25 2012] Fit fullrun_ccd7_acisf10563_pi14-548_cl_pass1_tfrozen_src25 appears to have run properly
[Tue Mar 13 10:19:30 2012] Spatial fit model total counts = 32.999400, observed total counts = 33.000000
[Tue Mar 13 10:19:30 2012] Offset between fit and detection position for source 29 = 0.029929 pixels
[Tue Mar 13 10:19:30 2012] 31.891500 total counts/ 19.191200 bgd. counts: snr = 2.899098
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.029929 pixels
  Position = (708.9, 392.1) = 2 25 5.20 -24 47 5.8
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 12.7 +/- 5.6
  Background counts = 19.2
  Rate = 0.0004 +/- 0.0002
[Tue Mar 13 10:19:30 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 10:19:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 10:19:30 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 10:19:30 2012] Source does appear to be extended
[Tue Mar 13 10:19:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 10:19:49 2012] Not overwriting source region fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src29_src.reg
[Tue Mar 13 10:19:49 2012] Extracting stamp from image fullrun_ccd7_acisf10563_pi14-548_cl_sm2.00.img.gz, (690, 373) - (728, 411)
[Tue Mar 13 10:19:50 2012] Writing fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src29.gif
[Tue Mar 13 10:21:01 2012] ../../acisf10563/products/events/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src29_src.evt and ../../acisf10563/products/events/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src29_bgd.evt exist, delete to re-create
[Tue Mar 13 10:21:01 2012] Size of ../../acisf10563/products/events/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src29_src.evt.gz[events] = 16 counts
[Tue Mar 13 10:21:01 2012] Mean chipx,y = (247.50, 499.31)
[Tue Mar 13 10:21:01 2012] Mean tdetx,y = (4164.50, 2201.31)
[Tue Mar 13 10:21:01 2012] chipx,y range = (233.00-266.00, 484.00-516.00)
[Tue Mar 13 10:21:02 2012] Size of ../../acisf10563/products/events/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src29_bgd.evt.gz[events] = 24 counts
[Tue Mar 13 10:21:02 2012] ../../acisf10563/products/images/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src29_src.img and ../../acisf10563/products/images/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src29_bgd.img exist, delete to re-create
[Tue Mar 13 10:21:02 2012] ../../acisf10563/products/spectra/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src29_src.pi and ../../acisf10563/products/spectra/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src29_bgd.pi exist, delete to re-create
[Tue Mar 13 10:21:02 2012] Not generating rmf since there are only 12 counts
[Tue Mar 13 10:21:04 2012] ../../acisf10563/products/lightcurves/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src29_src.lc and ../../acisf10563/products/lightcurves/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src29_bgd.lc exist, delete to re-create
[Tue Mar 13 10:21:33 2012] 224.053
[Tue Mar 13 10:21:34 2012] Updating aperture counts using extracted products
[Tue Mar 13 10:21:34 2012] Error reading totcts from fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src29_src.pi.gz
[Tue Mar 13 10:21:35 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 10:21:35 2012] Using photon index=1.80, rate=0.000427, arf fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src29.arf
[Tue Mar 13 10:21:35 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Mar 13 10:21:35 2012] Updating source flux to 3.3e-15
[Tue Mar 13 10:21:40 2012] Source 29 has fewer than 100.000000 counts, skipping spectral fitting