[Tue Mar 13 10:18:37 2012] Detection parameters:
  Position = (729.5, 366.0) = 2 25 4.44 -24 47 18.4
  Extent = 0.7" x 0.6", rotation angle = 120 degrees
  Source counts = 36.4 +/- 6.6
  Background counts = 6.6
  Rate = 0.001 +/- 0.0002

[Tue Mar 13 10:18:38 2012] Off-axis axis estimate = 0.26'
[Tue Mar 13 10:19:04 2012] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 10:19:04 2012] Initial guess for spatial extent in simple fitting = 0.41"
[Tue Mar 13 10:19:04 2012] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.851
[Tue Mar 13 10:19:04 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 0.41"
[Tue Mar 13 10:19:07 2012] fullrun_ccd7_acisf10563_pi14-548_cl_pass0_src15.ximg exists
[Tue Mar 13 10:19:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10563_pi14-548_cl_pass0_src15.csv
[Tue Mar 13 10:19:07 2012] fullrun_ccd7_acisf10563_pi14-548_cl_pass0_src15_1.ximg exists
[Tue Mar 13 10:19:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10563_pi14-548_cl_pass0_src15.csv
[Tue Mar 13 10:19:07 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10563_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10563_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 10:19:08 2012] fullrun_ccd7_acisf10563_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Tue Mar 13 10:19:08 2012] fullrun_ccd7_acisf10563_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Tue Mar 13 10:19:08 2012] Fit fullrun_ccd7_acisf10563_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Tue Mar 13 10:19:16 2012] Spatial fit model total counts = 90.203000, observed total counts = 91.000000
[Tue Mar 13 10:19:16 2012] Offset between fit and detection position for source 20 = 2.942918 pixels
[Tue Mar 13 10:19:16 2012] 87.831900 total counts/ 28.405300 bgd. counts: snr = 11.150162
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 2.942918 pixels
  Position = (729.0, 368.9) = 2 25 4.48 -24 47 17.2
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 59.4 +/- 9.4
  Background counts = 28.4
  Rate = 0.002 +/- 0.0003
[Tue Mar 13 10:19:16 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 10:19:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 10:19:16 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 10:19:16 2012] Source does appear to be extended
[Tue Mar 13 10:19:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 10:19:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 10:19:23 2012] Initial guess for spatial extent in simple fitting = 1.50"
[Tue Mar 13 10:19:23 2012] source mask rpix=3.0, npix_max = 50, mask sum = 56, frac = 1.112
[Tue Mar 13 10:19:23 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 1.50"
[Tue Mar 13 10:19:24 2012] fullrun_ccd7_acisf10563_pi14-548_cl_pass1_src15.ximg exists
[Tue Mar 13 10:19:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10563_pi14-548_cl_pass1_src15.csv
[Tue Mar 13 10:19:24 2012] fullrun_ccd7_acisf10563_pi14-548_cl_pass1_src15_1.ximg exists
[Tue Mar 13 10:19:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10563_pi14-548_cl_pass1_src15.csv
[Tue Mar 13 10:19:24 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10563_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10563_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 10:19:24 2012] fullrun_ccd7_acisf10563_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Tue Mar 13 10:19:24 2012] fullrun_ccd7_acisf10563_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Tue Mar 13 10:19:24 2012] Fit fullrun_ccd7_acisf10563_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Tue Mar 13 10:19:30 2012] Spatial fit model total counts = 108.000000, observed total counts = 108.000000
[Tue Mar 13 10:19:30 2012] Offset between fit and detection position for source 20 = 0.451091 pixels
[Tue Mar 13 10:19:30 2012] 107.229600 total counts/ 50.924300 bgd. counts: snr = 7.890177
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.451091 pixels
  Position = (728.7, 368.5) = 2 25 4.49 -24 47 17.4
  Extent = 1.7 (1.1-2.3)", rotation angle = 0
  Source counts = 56.3 +/- 10.4
  Background counts = 50.9
  Rate = 0.002 +/- 0.0003
[Tue Mar 13 10:19:30 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 10:19:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 10:19:30 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 10:19:30 2012] Source does appear to be extended
[Tue Mar 13 10:19:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 10:19:49 2012] Not overwriting source region fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src20_src.reg
[Tue Mar 13 10:19:49 2012] Extracting stamp from image fullrun_ccd7_acisf10563_pi14-548_cl_sm2.00.img.gz, (653, 293) - (804, 444)
[Tue Mar 13 10:19:49 2012] Writing fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src20.gif
[Tue Mar 13 10:20:34 2012] ../../acisf10563/products/events/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src20_src.evt and ../../acisf10563/products/events/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src20_bgd.evt exist, delete to re-create
[Tue Mar 13 10:20:34 2012] Size of ../../acisf10563/products/events/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src20_src.evt.gz[events] = 123 counts
[Tue Mar 13 10:20:34 2012] Mean chipx,y = (221.11, 512.99)
[Tue Mar 13 10:20:34 2012] Mean tdetx,y = (4138.11, 2214.99)
[Tue Mar 13 10:20:34 2012] chipx,y range = (196.00-244.00, 490.00-540.00)
[Tue Mar 13 10:20:34 2012] Size of ../../acisf10563/products/events/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src20_bgd.evt.gz[events] = 338 counts
[Tue Mar 13 10:20:34 2012] ../../acisf10563/products/images/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src20_src.img and ../../acisf10563/products/images/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src20_bgd.img exist, delete to re-create
[Tue Mar 13 10:20:34 2012] ../../acisf10563/products/spectra/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src20_src.pi and ../../acisf10563/products/spectra/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src20_bgd.pi exist, delete to re-create
[Tue Mar 13 10:20:34 2012] Not generating rmf since there are only 56 counts
[Tue Mar 13 10:20:37 2012] ../../acisf10563/products/lightcurves/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src20_src.lc and ../../acisf10563/products/lightcurves/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src20_bgd.lc exist, delete to re-create
[Tue Mar 13 10:21:32 2012] 236.066
[Tue Mar 13 10:21:34 2012] Updating aperture counts using extracted products
[Tue Mar 13 10:21:34 2012] Error reading totcts from fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src20_src.pi.gz
[Tue Mar 13 10:21:34 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 10:21:34 2012] Using photon index=1.80, rate=0.00189, arf fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src20.arf
[Tue Mar 13 10:21:34 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Mar 13 10:21:34 2012] Updating source flux to 1.4e-14
[Tue Mar 13 10:21:40 2012] Source 20 has fewer than 100.000000 counts, skipping spectral fitting