[Tue Mar 13 10:18:37 2012] Detection parameters:
  Position = (431.8, 969.8) = 2 25 15.19 -24 42 21.3
  Extent = 2.3" x 1.1", rotation angle = 71 degrees
  Source counts = 49.5 +/- 7.9
  Background counts = 12.5
  Rate = 0.002 +/- 0.0003

[Tue Mar 13 10:18:38 2012] Off-axis axis estimate = 5.72'
[Tue Mar 13 10:19:04 2012] Using EEF radius (= 1.50 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 10:19:04 2012] Initial guess for spatial extent in simple fitting = 1.50"
[Tue Mar 13 10:19:04 2012] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.978
[Tue Mar 13 10:19:04 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 1.50"
[Tue Mar 13 10:19:06 2012] fullrun_ccd7_acisf10563_pi14-548_cl_pass0_src10.ximg exists
[Tue Mar 13 10:19:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10563_pi14-548_cl_pass0_src10.csv
[Tue Mar 13 10:19:06 2012] fullrun_ccd7_acisf10563_pi14-548_cl_pass0_src10_1.ximg exists
[Tue Mar 13 10:19:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10563_pi14-548_cl_pass0_src10.csv
[Tue Mar 13 10:19:06 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10563_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10563_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 10:19:08 2012] fullrun_ccd7_acisf10563_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Tue Mar 13 10:19:08 2012] fullrun_ccd7_acisf10563_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Mar 13 10:19:08 2012] Fit fullrun_ccd7_acisf10563_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Tue Mar 13 10:19:16 2012] Spatial fit model total counts = 49.965000, observed total counts = 52.000000
[Tue Mar 13 10:19:16 2012] Offset between fit and detection position for source 10 = 1.568811 pixels
[Tue Mar 13 10:19:16 2012] 50.960900 total counts/ 12.363800 bgd. counts: snr = 10.976874
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.568811 pixels
  Position = (432.0, 971.4) = 2 25 15.20 -24 42 20.7
  Extent = 1.6 (1.1-2.4)", rotation angle = 0
  Source counts = 38.6 +/- 7.1
  Background counts = 12.4
  Rate = 0.001 +/- 0.0002
[Tue Mar 13 10:19:16 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 10:19:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 10:19:16 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 10:19:16 2012] Source does appear to be extended
[Tue Mar 13 10:19:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 10:19:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 10:19:23 2012] Initial guess for spatial extent in simple fitting = 1.59"
[Tue Mar 13 10:19:23 2012] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.003
[Tue Mar 13 10:19:23 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 1.59"
[Tue Mar 13 10:19:24 2012] fullrun_ccd7_acisf10563_pi14-548_cl_pass1_src10.ximg exists
[Tue Mar 13 10:19:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10563_pi14-548_cl_pass1_src10.csv
[Tue Mar 13 10:19:24 2012] fullrun_ccd7_acisf10563_pi14-548_cl_pass1_src10_1.ximg exists
[Tue Mar 13 10:19:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10563_pi14-548_cl_pass1_src10.csv
[Tue Mar 13 10:19:24 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10563_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10563_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 10:19:24 2012] fullrun_ccd7_acisf10563_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Tue Mar 13 10:19:24 2012] fullrun_ccd7_acisf10563_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Mar 13 10:19:24 2012] Fit fullrun_ccd7_acisf10563_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Tue Mar 13 10:19:30 2012] Spatial fit model total counts = 51.732600, observed total counts = 53.000000
[Tue Mar 13 10:19:30 2012] Offset between fit and detection position for source 10 = 0.523632 pixels
[Tue Mar 13 10:19:30 2012] 52.862506 total counts/ 0.302006 bgd. counts: snr = 95.642672
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.523632 pixels
  Position = (432.2, 970.9) = 2 25 15.19 -24 42 21.0
  Extent = 1.8 (1.4-2.1)", rotation angle = 0
  Source counts = 52.6 +/- 7.3
  Background counts = 0.3
  Rate = 0.002 +/- 0.0002
[Tue Mar 13 10:19:30 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 10:19:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 10:19:30 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 10:19:30 2012] Source does appear to be extended
[Tue Mar 13 10:19:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 10:19:49 2012] Not overwriting source region fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src10_src.reg
[Tue Mar 13 10:19:49 2012] Extracting stamp from image fullrun_ccd7_acisf10563_pi14-548_cl_sm2.00.img.gz, (349, 888) - (515, 1054)
[Tue Mar 13 10:19:49 2012] Writing fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src10.gif
[Tue Mar 13 10:20:19 2012] ../../acisf10563/products/events/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src10_src.evt and ../../acisf10563/products/events/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Tue Mar 13 10:20:19 2012] Size of ../../acisf10563/products/events/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src10_src.evt.gz[events] = 68 counts
[Tue Mar 13 10:20:19 2012] Mean chipx,y = (885.71, 404.63)
[Tue Mar 13 10:20:19 2012] Mean tdetx,y = (4802.71, 2106.63)
[Tue Mar 13 10:20:19 2012] chipx,y range = (858.00-915.00, 377.00-426.00)
[Tue Mar 13 10:20:19 2012] Size of ../../acisf10563/products/events/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 191 counts
[Tue Mar 13 10:20:19 2012] ../../acisf10563/products/images/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src10_src.img and ../../acisf10563/products/images/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Tue Mar 13 10:20:19 2012] ../../acisf10563/products/spectra/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src10_src.pi and ../../acisf10563/products/spectra/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Tue Mar 13 10:20:19 2012] Not generating rmf since there are only 52 counts
[Tue Mar 13 10:20:22 2012] ../../acisf10563/products/lightcurves/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src10_src.lc and ../../acisf10563/products/lightcurves/fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Tue Mar 13 10:21:32 2012] 215.252
[Tue Mar 13 10:21:34 2012] Updating aperture counts using extracted products
[Tue Mar 13 10:21:34 2012] Error reading totcts from fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src10_src.pi.gz
[Tue Mar 13 10:21:34 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 10:21:34 2012] Using photon index=1.80, rate=0.00177, arf fullrun_ccd7_acisf10563_pi14-548_pass1_cl_src10.arf
[Tue Mar 13 10:21:34 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Mar 13 10:21:34 2012] Updating source flux to 1.4e-14
[Tue Mar 13 10:21:40 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting