[Mon Oct 31 22:13:01 2011] Detection parameters:
  Position = (611.4, 860.0) = 17 45 19.84 -29 1 13.5
  Extent = 1.1" x 0.7", rotation angle = 77 degrees
  Source counts = 64.6 +/- 8.9
  Background counts = 15.4
  Rate = 0.0006 +/- 8e-05

[Mon Oct 31 22:13:41 2011] Off-axis axis estimate = 4.52'
[Mon Oct 31 22:17:18 2011] Using EEF radius (= 1.00 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 22:17:18 2011] Initial guess for spatial extent in simple fitting = 1.00"
[Mon Oct 31 22:17:18 2011] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.167
[Mon Oct 31 22:17:18 2011] Giving source the simple spatial ID 28 for pass 0, mean size = 1.00"
[Mon Oct 31 22:17:19 2011] fullrun_ccd3_acisf10556_pi14-548_cl_pass0_src28.ximg exists
[Mon Oct 31 22:17:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10556_pi14-548_cl_pass0_src28.csv
[Mon Oct 31 22:17:19 2011] fullrun_ccd3_acisf10556_pi14-548_cl_pass0_src28_1.ximg exists
[Mon Oct 31 22:17:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10556_pi14-548_cl_pass0_src28.csv
[Mon Oct 31 22:17:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10556_pi14-548_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10556_pi14-548_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 22:17:21 2011] fullrun_ccd3_acisf10556_pi14-548_cl_pass0_tfrozen_src28.ximg exists
[Mon Oct 31 22:17:21 2011] fullrun_ccd3_acisf10556_pi14-548_cl_pass0_tfrozen_src28_1.ximg exists
[Mon Oct 31 22:17:21 2011] Fit fullrun_ccd3_acisf10556_pi14-548_cl_pass0_tfrozen_src28 appears to have run properly
[Mon Oct 31 22:18:27 2011] Spatial fit model total counts = 89.072000, observed total counts = 91.000000
[Mon Oct 31 22:18:27 2011] Offset between fit and detection position for source 80 = 0.539947 pixels
[Mon Oct 31 22:18:27 2011] 89.446700 total counts/ 26.550300 bgd. counts: snr = 12.206498
Spatial fit parameters:
  Offset between fit and detection position for source 80 = 0.539947 pixels
  Position = (611.9, 860.2) = 17 45 19.84 -29 1 13.7
  Extent = 1.0 (0.7-1.3)", rotation angle = 0
  Source counts = 62.9 +/- 9.5
  Background counts = 26.6
  Rate = 0.0006 +/- 8e-05
[Mon Oct 31 22:18:27 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 22:18:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 22:18:27 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 22:18:27 2011] Source does appear to be extended
[Mon Oct 31 22:18:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 22:19:35 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 31 22:19:35 2011] Initial guess for spatial extent in simple fitting = 1.00"
[Mon Oct 31 22:19:35 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.979
[Mon Oct 31 22:19:35 2011] Giving source the simple spatial ID 27 for pass 1, mean size = 1.00"
[Mon Oct 31 22:19:44 2011] fullrun_ccd3_acisf10556_pi14-548_cl_pass1_src27.ximg exists
[Mon Oct 31 22:19:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10556_pi14-548_cl_pass1_src27.csv
[Mon Oct 31 22:19:44 2011] fullrun_ccd3_acisf10556_pi14-548_cl_pass1_src27_1.ximg exists
[Mon Oct 31 22:19:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10556_pi14-548_cl_pass1_src27.csv
[Mon Oct 31 22:19:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10556_pi14-548_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10556_pi14-548_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 22:19:46 2011] fullrun_ccd3_acisf10556_pi14-548_cl_pass1_tfrozen_src27.ximg exists
[Mon Oct 31 22:19:46 2011] fullrun_ccd3_acisf10556_pi14-548_cl_pass1_tfrozen_src27_1.ximg exists
[Mon Oct 31 22:19:46 2011] Fit fullrun_ccd3_acisf10556_pi14-548_cl_pass1_tfrozen_src27 appears to have run properly
[Mon Oct 31 22:20:44 2011] Spatial fit model total counts = 89.583500, observed total counts = 91.000000
[Mon Oct 31 22:20:44 2011] Offset between fit and detection position for source 80 = 0.014743 pixels
[Mon Oct 31 22:20:44 2011] 89.998800 total counts/ 27.455000 bgd. counts: snr = 11.936405
Spatial fit parameters:
  Offset between fit and detection position for source 80 = 0.014743 pixels
  Position = (611.9, 860.2) = 17 45 19.85 -29 1 13.7
  Extent = 1.0 (0.7-1.3)", rotation angle = 0
  Source counts = 62.5 +/- 9.5
  Background counts = 27.5
  Rate = 0.0006 +/- 8e-05
[Mon Oct 31 22:20:45 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 22:20:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 22:20:45 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 22:20:45 2011] Source does appear to be extended
[Mon Oct 31 22:20:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 22:38:39 2011] Not overwriting source region fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src80_src.reg
[Mon Oct 31 22:38:39 2011] Extracting stamp from image fullrun_ccd3_acisf10556_pi14-548_cl_sm2.00.img.gz, (567, 815) - (657, 905)
[Mon Oct 31 22:38:39 2011] Writing fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src80.gif
[Mon Oct 31 22:40:33 2011] ../../acisf10556/products/events/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src80_src.evt and ../../acisf10556/products/events/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src80_bgd.evt exist, delete to re-create
[Mon Oct 31 22:40:33 2011] Size of ../../acisf10556/products/events/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src80_src.evt.gz[events] = 83 counts
[Mon Oct 31 22:40:33 2011] Mean chipx,y = (463.57, 760.41)
[Mon Oct 31 22:40:33 2011] Mean tdetx,y = (4371.59, 3524.57)
[Mon Oct 31 22:40:33 2011] chipx,y range = (446.00-483.00, 743.00-783.00)
[Mon Oct 31 22:40:33 2011] Size of ../../acisf10556/products/events/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src80_bgd.evt.gz[events] = 240 counts
[Mon Oct 31 22:40:33 2011] ../../acisf10556/products/images/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src80_src.img and ../../acisf10556/products/images/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src80_bgd.img exist, delete to re-create
[Mon Oct 31 22:40:33 2011] ../../acisf10556/products/spectra/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src80_src.pi and ../../acisf10556/products/spectra/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src80_bgd.pi exist, delete to re-create
[Mon Oct 31 22:40:33 2011] Not generating rmf since there are only 62 counts
[Mon Oct 31 22:40:36 2011] ../../acisf10556/products/lightcurves/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src80_src.lc and ../../acisf10556/products/lightcurves/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src80_bgd.lc exist, delete to re-create
[Mon Oct 31 22:43:53 2011] 180.019
[Mon Oct 31 22:44:11 2011] Updating aperture counts using extracted products
[Mon Oct 31 22:44:11 2011] Error reading totcts from fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src80_src.pi.gz
[Mon Oct 31 22:44:12 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 31 22:44:12 2011] Using photon index=1.80, rate=0.000556, arf fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src80.arf
[Mon Oct 31 22:44:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 31 22:44:13 2011] Updating source flux to 9.4e-15
[Mon Oct 31 22:46:30 2011] Source 80 has fewer than 100.000000 counts, skipping spectral fitting