[Mon Oct 31 22:12:36 2011] Detection parameters:
  Position = (458.3, 951.7) = 17 45 25.59 -29 0 28.5
  Extent = 0.8" x 0.5", rotation angle = 76 degrees
  Source counts = 142.5 +/- 12.7
  Background counts = 18.5
  Rate = 0.001 +/- 0.0001

[Mon Oct 31 22:13:41 2011] Off-axis axis estimate = 3.13'
[Mon Oct 31 22:17:18 2011] Using EEF radius (= 0.61 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 22:17:18 2011] Initial guess for spatial extent in simple fitting = 0.61"
[Mon Oct 31 22:17:18 2011] source mask rpix=1.2, npix_max = 12, mask sum = 9, frac = 0.748
[Mon Oct 31 22:17:18 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 0.61"
[Mon Oct 31 22:17:19 2011] fullrun_ccd3_acisf10556_pi14-548_cl_pass0_src15.ximg exists
[Mon Oct 31 22:17:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10556_pi14-548_cl_pass0_src15.csv
[Mon Oct 31 22:17:19 2011] fullrun_ccd3_acisf10556_pi14-548_cl_pass0_src15_1.ximg exists
[Mon Oct 31 22:17:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10556_pi14-548_cl_pass0_src15.csv
[Mon Oct 31 22:17:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10556_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10556_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 22:17:21 2011] fullrun_ccd3_acisf10556_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Mon Oct 31 22:17:21 2011] fullrun_ccd3_acisf10556_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Mon Oct 31 22:17:21 2011] Fit fullrun_ccd3_acisf10556_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Mon Oct 31 22:18:26 2011] Spatial fit model total counts = 177.992000, observed total counts = 178.000000
[Mon Oct 31 22:18:26 2011] Offset between fit and detection position for source 11 = 0.972322 pixels
[Mon Oct 31 22:18:26 2011] 178.135300 total counts/ 38.031300 bgd. counts: snr = 22.718515
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.972322 pixels
  Position = (458.9, 952.5) = 17 45 25.59 -29 0 28.3
  Extent = 0.7 (0.6-0.7)", rotation angle = 0
  Source counts = 140.1 +/- 13.3
  Background counts = 38.0
  Rate = 0.001 +/- 0.0001
[Mon Oct 31 22:18:27 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 22:18:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 22:18:27 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 22:18:27 2011] Source does appear to be extended
[Mon Oct 31 22:18:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 22:19:35 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 31 22:19:35 2011] Initial guess for spatial extent in simple fitting = 0.65"
[Mon Oct 31 22:19:35 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.898
[Mon Oct 31 22:19:35 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 0.65"
[Mon Oct 31 22:19:40 2011] fullrun_ccd3_acisf10556_pi14-548_cl_pass1_src15.ximg exists
[Mon Oct 31 22:19:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10556_pi14-548_cl_pass1_src15.csv
[Mon Oct 31 22:19:41 2011] fullrun_ccd3_acisf10556_pi14-548_cl_pass1_src15_1.ximg exists
[Mon Oct 31 22:19:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10556_pi14-548_cl_pass1_src15.csv
[Mon Oct 31 22:19:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10556_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10556_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 22:19:46 2011] fullrun_ccd3_acisf10556_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Mon Oct 31 22:19:46 2011] fullrun_ccd3_acisf10556_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Mon Oct 31 22:19:46 2011] Fit fullrun_ccd3_acisf10556_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Mon Oct 31 22:20:44 2011] Spatial fit model total counts = 177.993000, observed total counts = 178.000000
[Mon Oct 31 22:20:44 2011] Offset between fit and detection position for source 11 = 0.000013 pixels
[Mon Oct 31 22:20:44 2011] 178.136400 total counts/ 38.027400 bgd. counts: snr = 22.720491
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.000013 pixels
  Position = (458.9, 952.5) = 17 45 25.59 -29 0 28.3
  Extent = 0.7 (0.6-0.7)", rotation angle = 0
  Source counts = 140.1 +/- 13.3
  Background counts = 38.0
  Rate = 0.001 +/- 0.0001
[Mon Oct 31 22:20:45 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 22:20:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 22:20:45 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 22:20:45 2011] Source does appear to be extended
[Mon Oct 31 22:20:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 22:38:39 2011] Not overwriting source region fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src11_src.reg
[Mon Oct 31 22:38:39 2011] Extracting stamp from image fullrun_ccd3_acisf10556_pi14-548_cl_sm2.00.img.gz, (429, 923) - (489, 982)
[Mon Oct 31 22:38:39 2011] Writing fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src11.gif
[Mon Oct 31 22:39:50 2011] ../../acisf10556/products/events/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src11_src.evt and ../../acisf10556/products/events/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Mon Oct 31 22:39:50 2011] Size of ../../acisf10556/products/events/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src11_src.evt.gz[events] = 155 counts
[Mon Oct 31 22:39:50 2011] Mean chipx,y = (597.54, 882.35)
[Mon Oct 31 22:39:50 2011] Mean tdetx,y = (4249.65, 3658.54)
[Mon Oct 31 22:39:50 2011] chipx,y range = (580.00-615.00, 865.00-902.00)
[Mon Oct 31 22:39:50 2011] Size of ../../acisf10556/products/events/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 131 counts
[Mon Oct 31 22:39:50 2011] ../../acisf10556/products/images/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src11_src.img and ../../acisf10556/products/images/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Mon Oct 31 22:39:50 2011] ../../acisf10556/products/spectra/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src11_src.pi and ../../acisf10556/products/spectra/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Mon Oct 31 22:39:53 2011] ../../acisf10556/products/lightcurves/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src11_src.lc and ../../acisf10556/products/lightcurves/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Mon Oct 31 22:43:53 2011] Keeping rmf generated by specextract
[Mon Oct 31 22:43:53 2011] 191.115
[Mon Oct 31 22:44:11 2011] Updating aperture counts using extracted products
[Mon Oct 31 22:44:11 2011] Error reading totcts from fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src11_src.pi.gz
[Mon Oct 31 22:44:12 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 31 22:44:12 2011] Using photon index=1.80, rate=0.00124, arf fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src11.arf
[Mon Oct 31 22:44:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 31 22:44:12 2011] Updating source flux to 2e-14