[Mon Oct 31 22:12:36 2011] Detection parameters:
  Position = (80.5, 950.4) = 17 45 39.76 -29 0 29.2
  Extent = 0.5" x 0.5", rotation angle = 171 degrees
  Source counts = 396.8 +/- 22.9
  Background counts = 126.2
  Rate = 0.004 +/- 0.0002

[Mon Oct 31 22:13:41 2011] Off-axis axis estimate = 0.51'
[Mon Oct 31 22:17:18 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 22:17:18 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Mon Oct 31 22:17:18 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.337
[Mon Oct 31 22:17:18 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 0.39"
[Mon Oct 31 22:17:19 2011] fullrun_ccd3_acisf10556_pi14-548_cl_pass0_src5.ximg exists
[Mon Oct 31 22:17:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10556_pi14-548_cl_pass0_src5.csv
[Mon Oct 31 22:17:19 2011] fullrun_ccd3_acisf10556_pi14-548_cl_pass0_src5_1.ximg exists
[Mon Oct 31 22:17:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10556_pi14-548_cl_pass0_src5.csv
[Mon Oct 31 22:17:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10556_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10556_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 22:17:20 2011] fullrun_ccd3_acisf10556_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Mon Oct 31 22:17:20 2011] fullrun_ccd3_acisf10556_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Oct 31 22:17:20 2011] Fit fullrun_ccd3_acisf10556_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Mon Oct 31 22:18:26 2011] Spatial fit model total counts = 2812.060000, observed total counts = 2808.000000
[Mon Oct 31 22:18:26 2011] Offset between fit and detection position for source 10 = 4.861327 pixels
[Mon Oct 31 22:18:26 2011] 2834.397000 total counts/ 1944.590000 bgd. counts: snr = 20.178171
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 4.861327 pixels
  Position = (76.8, 953.6) = 17 45 39.92 -29 0 27.8
  Extent = 1.5 (1.4-3.0)", rotation angle = 0
  Source counts = 889.8 +/- 53.2
  Background counts = 1944.6
  Rate = 0.008 +/- 0.0005
[Mon Oct 31 22:18:27 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 22:18:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 22:18:27 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 22:18:27 2011] Source does appear to be extended
[Mon Oct 31 22:18:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 22:18:27 2011] Source is confused with source 3
[Mon Oct 31 22:19:35 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 31 22:19:35 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 31 22:19:35 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Mon Oct 31 22:19:35 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.973
[Mon Oct 31 22:19:35 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 1.50"
[Mon Oct 31 22:19:39 2011] fullrun_ccd3_acisf10556_pi14-548_cl_pass1_src5.ximg exists
[Mon Oct 31 22:19:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10556_pi14-548_cl_pass1_src5.csv
[Mon Oct 31 22:19:39 2011] fullrun_ccd3_acisf10556_pi14-548_cl_pass1_src5_1.ximg exists
[Mon Oct 31 22:19:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10556_pi14-548_cl_pass1_src5.csv
[Mon Oct 31 22:19:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10556_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10556_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 22:19:45 2011] fullrun_ccd3_acisf10556_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Mon Oct 31 22:19:45 2011] fullrun_ccd3_acisf10556_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Oct 31 22:19:46 2011] Fit fullrun_ccd3_acisf10556_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Mon Oct 31 22:20:44 2011] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 13.469447 pixels away
[Mon Oct 31 22:20:44 2011] Source 10 is offset by -4.428902 and 2.961850 pixels which is larger than
2 X fitted extent = 2.043447 x 2.043447, not incorporating fit results
[Mon Oct 31 22:20:45 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 22:20:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 22:20:45 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 22:20:45 2011] Source does appear to be extended
[Mon Oct 31 22:20:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 22:38:39 2011] Not overwriting source region fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src10_src.reg
[Mon Oct 31 22:38:39 2011] Extracting stamp from image fullrun_ccd3_acisf10556_pi14-548_cl_sm2.00.img.gz, (8, 885) - (145, 1022)
[Mon Oct 31 22:38:39 2011] Writing fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src10.gif
[Mon Oct 31 22:39:10 2011] ../../acisf10556/products/events/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src10_src.evt and ../../acisf10556/products/events/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Mon Oct 31 22:39:11 2011] Size of ../../acisf10556/products/events/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src10_src.evt.gz[events] = 4404 counts
[Mon Oct 31 22:39:11 2011] Mean chipx,y = (973.50, 958.91)
[Mon Oct 31 22:39:11 2011] Mean tdetx,y = (4173.09, 4034.50)
[Mon Oct 31 22:39:11 2011] chipx,y range = (945.00-1001.00, 931.00-987.00)
[Mon Oct 31 22:39:11 2011] Size of ../../acisf10556/products/events/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 4395 counts
[Mon Oct 31 22:39:11 2011] ../../acisf10556/products/images/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src10_src.img and ../../acisf10556/products/images/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Mon Oct 31 22:39:11 2011] ../../acisf10556/products/spectra/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src10_src.pi and ../../acisf10556/products/spectra/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Mon Oct 31 22:39:14 2011] ../../acisf10556/products/lightcurves/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src10_src.lc and ../../acisf10556/products/lightcurves/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Mon Oct 31 22:43:52 2011] Keeping rmf generated by specextract
[Mon Oct 31 22:43:52 2011] 203.082
[Mon Oct 31 22:44:11 2011] Updating aperture counts using extracted products
[Mon Oct 31 22:44:11 2011] Error reading totcts from fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src10_src.pi.gz
[Mon Oct 31 22:44:12 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 31 22:44:12 2011] Using photon index=1.80, rate=0.00791, arf fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src10.arf
[Mon Oct 31 22:44:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 31 22:44:12 2011] Updating source flux to 1.2e-13
[Mon Oct 31 22:46:30 2011] Flag b found in src. 10 procflags, skipping spectral fitting
[Mon Oct 31 22:46:30 2011] Flag c found in src. 10 procflags, skipping spectral fitting