[Mon Oct 31 22:12:32 2011] Detection parameters:
  Position = (125.9, 964.9) = 17 45 38.05 -29 0 22.0
  Extent = 0.6" x 0.6", rotation angle = 65 degrees
  Source counts = 10949.5 +/- 107.3
  Background counts = 569.5
  Rate = 0.1 +/- 0.001

[Mon Oct 31 22:13:41 2011] Off-axis axis estimate = 0.53'
[Mon Oct 31 22:17:18 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 22:17:18 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Mon Oct 31 22:17:18 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.597
[Mon Oct 31 22:17:18 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.39"
[Mon Oct 31 22:17:19 2011] fullrun_ccd3_acisf10556_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 31 22:17:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10556_pi14-548_cl_pass0_src1.csv
[Mon Oct 31 22:17:19 2011] fullrun_ccd3_acisf10556_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 31 22:17:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10556_pi14-548_cl_pass0_src1.csv
[Mon Oct 31 22:17:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10556_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10556_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 22:17:20 2011] fullrun_ccd3_acisf10556_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 31 22:17:20 2011] fullrun_ccd3_acisf10556_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 31 22:17:20 2011] Fit fullrun_ccd3_acisf10556_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 31 22:18:26 2011] Spatial fit model total counts = 11168.500000, observed total counts = 11170.000000
[Mon Oct 31 22:18:26 2011] Offset between fit and detection position for source 1 = 0.746992 pixels
[Mon Oct 31 22:18:26 2011] 11190.910000 total counts/ 1395.290000 bgd. counts: snr = 262.240454
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.746992 pixels
  Position = (126.5, 965.4) = 17 45 38.05 -29 0 22.0
  Extent = 0.5 (0.5-0.5)", rotation angle = 0
  Source counts = 9795.6 +/- 105.8
  Background counts = 1395.3
  Rate = 0.09 +/- 0.0009
[Mon Oct 31 22:18:27 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 22:18:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 22:18:27 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 22:18:27 2011] Source does appear to be extended
[Mon Oct 31 22:18:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 22:19:35 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 31 22:19:35 2011] Initial guess for spatial extent in simple fitting = 0.48"
[Mon Oct 31 22:19:35 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.032
[Mon Oct 31 22:19:35 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.48"
[Mon Oct 31 22:19:38 2011] fullrun_ccd3_acisf10556_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 31 22:19:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10556_pi14-548_cl_pass1_src1.csv
[Mon Oct 31 22:19:38 2011] fullrun_ccd3_acisf10556_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 31 22:19:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10556_pi14-548_cl_pass1_src1.csv
[Mon Oct 31 22:19:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10556_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10556_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 22:19:45 2011] fullrun_ccd3_acisf10556_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 31 22:19:45 2011] fullrun_ccd3_acisf10556_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 31 22:19:45 2011] Fit fullrun_ccd3_acisf10556_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 31 22:20:44 2011] Spatial fit model total counts = 11170.000000, observed total counts = 11170.000000
[Mon Oct 31 22:20:44 2011] Offset between fit and detection position for source 1 = 0.001455 pixels
[Mon Oct 31 22:20:44 2011] 11192.350000 total counts/ 1394.160000 bgd. counts: snr = 262.415539
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.001455 pixels
  Position = (126.5, 965.4) = 17 45 38.05 -29 0 22.0
  Extent = 0.5 (0.5-0.5)", rotation angle = 0
  Source counts = 9798.2 +/- 105.8
  Background counts = 1394.2
  Rate = 0.09 +/- 0.0009
[Mon Oct 31 22:20:45 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 22:20:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 22:20:45 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 22:20:45 2011] Source does appear to be extended
[Mon Oct 31 22:20:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 22:38:38 2011] Not overwriting source region fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src1_src.reg
[Mon Oct 31 22:38:38 2011] Extracting stamp from image fullrun_ccd3_acisf10556_pi14-548_cl_sm2.00.img.gz, (104, 943) - (148, 987)
[Mon Oct 31 22:38:38 2011] Writing fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src1.gif
[Mon Oct 31 22:38:51 2011] ../../acisf10556/products/events/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src1_src.evt and ../../acisf10556/products/events/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Oct 31 22:38:51 2011] Size of ../../acisf10556/products/events/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src1_src.evt.gz[events] = 10230 counts
[Mon Oct 31 22:38:51 2011] Mean chipx,y = (922.33, 960.37)
[Mon Oct 31 22:38:51 2011] Mean tdetx,y = (4171.63, 3983.33)
[Mon Oct 31 22:38:51 2011] chipx,y range = (903.00-942.00, 938.00-980.00)
[Mon Oct 31 22:38:51 2011] Size of ../../acisf10556/products/events/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 964 counts
[Mon Oct 31 22:38:51 2011] ../../acisf10556/products/images/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src1_src.img and ../../acisf10556/products/images/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Oct 31 22:38:51 2011] ../../acisf10556/products/spectra/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src1_src.pi and ../../acisf10556/products/spectra/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon Oct 31 22:38:57 2011] ../../acisf10556/products/lightcurves/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src1_src.lc and ../../acisf10556/products/lightcurves/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Oct 31 22:43:52 2011] Keeping rmf generated by specextract
[Mon Oct 31 22:43:52 2011] 202.059
[Mon Oct 31 22:44:11 2011] Updating aperture counts using extracted products
[Mon Oct 31 22:44:11 2011] Error reading totcts from fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src1_src.pi.gz
[Mon Oct 31 22:44:12 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 31 22:44:12 2011] Using photon index=1.80, rate=0.0871, arf fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src1.arf
[Mon Oct 31 22:44:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 31 22:44:12 2011] Updating source flux to 1.3e-12
[Mon Oct 31 22:48:44 2011] Reading fit data from acisf10556/analysis//spectral/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src1_pl.csv
[Mon Oct 31 22:48:44 2011] Spectral fit parameter nH value = 1.57786e+23
[Mon Oct 31 22:48:44 2011] Spectral fit parameter PhoIndex value = 1.17501
[Mon Oct 31 22:48:44 2011] Failed to get F(0.3-8.0) from acisf10556/analysis//spectral/fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Oct 31 22:48:44 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 31 22:48:44 2011] Using Nh = 1.6e+23, photon index=1.18, rate=0.0871, arf fullrun_ccd3_acisf10556_pi14-548_pass1_cl_src1.arf
[Mon Oct 31 22:48:44 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 31 22:48:44 2011] Updating source flux to 3.1e-12