[Mon Oct 31 22:12:24 2011] Detection parameters:
  Position = (752.7, 320.1) = 17 45 21.87 -28 57 20.8
  Extent = 1.3" x 0.8", rotation angle = 177 degrees
  Source counts = 19.7 +/- 5.6
  Background counts = 11.3
  Rate = 0.0002 +/- 5e-05

[Mon Oct 31 22:12:27 2011] Off-axis axis estimate = 4.71'
[Mon Oct 31 22:17:02 2011] Using EEF radius (= 1.07 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 22:17:02 2011] Initial guess for spatial extent in simple fitting = 1.07"
[Mon Oct 31 22:17:02 2011] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.050
[Mon Oct 31 22:17:02 2011] Giving source the simple spatial ID 69 for pass 0, mean size = 1.07"
[Mon Oct 31 22:17:13 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass0_src69.ximg exists
[Mon Oct 31 22:17:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10556_pi14-548_cl_pass0_src69.csv
[Mon Oct 31 22:17:13 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass0_src69_1.ximg exists
[Mon Oct 31 22:17:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10556_pi14-548_cl_pass0_src69.csv
[Mon Oct 31 22:17:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10556_pi14-548_cl_pass0_src69_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10556_pi14-548_cl_pass0_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 22:17:15 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass0_tfrozen_src69.ximg exists
[Mon Oct 31 22:17:15 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass0_tfrozen_src69_1.ximg exists
[Mon Oct 31 22:17:15 2011] Fit fullrun_ccd2_acisf10556_pi14-548_cl_pass0_tfrozen_src69 appears to have run properly
[Mon Oct 31 22:18:13 2011] Spatial fit model total counts = 37.656000, observed total counts = 38.000000
[Mon Oct 31 22:18:13 2011] Offset between fit and detection position for source 92 = 0.611046 pixels
[Mon Oct 31 22:18:13 2011] 37.828400 total counts/ 23.321700 bgd. counts: snr = 3.003921
Spatial fit parameters:
  Offset between fit and detection position for source 92 = 0.611046 pixels
  Position = (753.2, 320.4) = 17 45 21.87 -28 57 20.9
  Extent = 0.7 (0.4-1.1)", rotation angle = 0
  Source counts = 14.5 +/- 6.2
  Background counts = 23.3
  Rate = 0.0001 +/- 5e-05
[Mon Oct 31 22:18:14 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 22:18:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 22:18:14 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 22:18:14 2011] Source does appear to be extended
[Mon Oct 31 22:18:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 22:19:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 31 22:19:25 2011] Initial guess for spatial extent in simple fitting = 0.68"
[Mon Oct 31 22:19:25 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.839
[Mon Oct 31 22:19:25 2011] Giving source the simple spatial ID 66 for pass 1, mean size = 0.68"
[Mon Oct 31 22:19:28 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass1_src66.ximg exists
[Mon Oct 31 22:19:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10556_pi14-548_cl_pass1_src66.csv
[Mon Oct 31 22:19:28 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass1_src66_1.ximg exists
[Mon Oct 31 22:19:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10556_pi14-548_cl_pass1_src66.csv
[Mon Oct 31 22:19:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10556_pi14-548_cl_pass1_src66_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10556_pi14-548_cl_pass1_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 22:19:34 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass1_tfrozen_src66.ximg exists
[Mon Oct 31 22:19:34 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass1_tfrozen_src66_1.ximg exists
[Mon Oct 31 22:19:34 2011] Fit fullrun_ccd2_acisf10556_pi14-548_cl_pass1_tfrozen_src66 appears to have run properly
[Mon Oct 31 22:20:32 2011] Spatial fit model total counts = 38.051100, observed total counts = 38.000000
[Mon Oct 31 22:20:32 2011] Offset between fit and detection position for source 92 = 0.082755 pixels
[Mon Oct 31 22:20:32 2011] 38.207200 total counts/ 23.033200 bgd. counts: snr = 3.161717
Spatial fit parameters:
  Offset between fit and detection position for source 92 = 0.082755 pixels
  Position = (753.3, 320.4) = 17 45 21.87 -28 57 20.9
  Extent = 0.7 (0.4-1.2)", rotation angle = 0
  Source counts = 15.2 +/- 6.2
  Background counts = 23.0
  Rate = 0.0001 +/- 5e-05
[Mon Oct 31 22:20:33 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 22:20:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 22:20:33 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 22:20:33 2011] Source does appear to be extended
[Mon Oct 31 22:20:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 22:29:12 2011] Not overwriting source region fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src92_src.reg
[Mon Oct 31 22:29:12 2011] Extracting stamp from image fullrun_ccd2_acisf10556_pi14-548_cl_sm2.00.img.gz, (721, 288) - (785, 353)
[Mon Oct 31 22:29:12 2011] Writing fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src92.gif
[Mon Oct 31 22:35:50 2011] ../../acisf10556/products/events/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src92_src.evt and ../../acisf10556/products/events/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src92_bgd.evt exist, delete to re-create
[Mon Oct 31 22:35:51 2011] Size of ../../acisf10556/products/events/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src92_src.evt.gz[events] = 25 counts
[Mon Oct 31 22:35:51 2011] Mean chipx,y = (600.00, 828.16)
[Mon Oct 31 22:35:51 2011] Mean tdetx,y = (3889.16, 3486.00)
[Mon Oct 31 22:35:51 2011] chipx,y range = (578.00-616.00, 814.00-848.00)
[Mon Oct 31 22:35:51 2011] Size of ../../acisf10556/products/events/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src92_bgd.evt.gz[events] = 150 counts
[Mon Oct 31 22:35:51 2011] ../../acisf10556/products/images/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src92_src.img and ../../acisf10556/products/images/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src92_bgd.img exist, delete to re-create
[Mon Oct 31 22:35:51 2011] ../../acisf10556/products/spectra/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src92_src.pi and ../../acisf10556/products/spectra/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src92_bgd.pi exist, delete to re-create
[Mon Oct 31 22:35:51 2011] Not generating rmf since there are only 15 counts
[Mon Oct 31 22:35:54 2011] ../../acisf10556/products/lightcurves/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src92_src.lc and ../../acisf10556/products/lightcurves/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src92_bgd.lc exist, delete to re-create
[Mon Oct 31 22:38:37 2011] 181.662
[Mon Oct 31 22:44:09 2011] Updating aperture counts using extracted products
[Mon Oct 31 22:44:09 2011] Error reading totcts from fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src92_src.pi.gz
[Mon Oct 31 22:44:10 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 31 22:44:10 2011] Using photon index=1.80, rate=0.000135, arf fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src92.arf
[Mon Oct 31 22:44:10 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 31 22:44:10 2011] Updating source flux to 2.2e-15
[Mon Oct 31 22:46:16 2011] Source 92 has fewer than 100.000000 counts, skipping spectral fitting