[Mon Oct 31 22:12:23 2011] Detection parameters:
  Position = (649.9, 122.4) = 17 45 25.72 -28 58 58.1
  Extent = 0.9" x 0.6", rotation angle = 171 degrees
  Source counts = 26.2 +/- 6.4
  Background counts = 14.8
  Rate = 0.0002 +/- 6e-05

[Mon Oct 31 22:12:27 2011] Off-axis axis estimate = 3.23'
[Mon Oct 31 22:17:02 2011] Using EEF radius (= 0.63 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 22:17:02 2011] Initial guess for spatial extent in simple fitting = 0.63"
[Mon Oct 31 22:17:02 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.950
[Mon Oct 31 22:17:02 2011] Giving source the simple spatial ID 57 for pass 0, mean size = 0.63"
[Mon Oct 31 22:17:11 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass0_src57.ximg exists
[Mon Oct 31 22:17:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10556_pi14-548_cl_pass0_src57.csv
[Mon Oct 31 22:17:12 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass0_src57_1.ximg exists
[Mon Oct 31 22:17:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10556_pi14-548_cl_pass0_src57.csv
[Mon Oct 31 22:17:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10556_pi14-548_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10556_pi14-548_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 22:17:14 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass0_tfrozen_src57.ximg exists
[Mon Oct 31 22:17:14 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass0_tfrozen_src57_1.ximg exists
[Mon Oct 31 22:17:14 2011] Fit fullrun_ccd2_acisf10556_pi14-548_cl_pass0_tfrozen_src57 appears to have run properly
[Mon Oct 31 22:18:13 2011] Spatial fit model total counts = 63.999800, observed total counts = 64.000000
[Mon Oct 31 22:18:13 2011] Offset between fit and detection position for source 83 = 0.656528 pixels
[Mon Oct 31 22:18:13 2011] 63.159700 total counts/ 31.482400 bgd. counts: snr = 5.645654
Spatial fit parameters:
  Offset between fit and detection position for source 83 = 0.656528 pixels
  Position = (650.3, 122.9) = 17 45 25.72 -28 58 58.1
  Extent = 1.0 (0.7-1.4)", rotation angle = 0
  Source counts = 31.7 +/- 7.9
  Background counts = 31.5
  Rate = 0.0003 +/- 7e-05
[Mon Oct 31 22:18:14 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 22:18:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 22:18:14 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 22:18:14 2011] Source does appear to be extended
[Mon Oct 31 22:18:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 22:19:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 31 22:19:25 2011] Initial guess for spatial extent in simple fitting = 1.00"
[Mon Oct 31 22:19:25 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.972
[Mon Oct 31 22:19:25 2011] Giving source the simple spatial ID 55 for pass 1, mean size = 1.00"
[Mon Oct 31 22:19:27 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass1_src55.ximg exists
[Mon Oct 31 22:19:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10556_pi14-548_cl_pass1_src55.csv
[Mon Oct 31 22:19:27 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass1_src55_1.ximg exists
[Mon Oct 31 22:19:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10556_pi14-548_cl_pass1_src55.csv
[Mon Oct 31 22:19:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10556_pi14-548_cl_pass1_src55_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10556_pi14-548_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 22:19:34 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass1_tfrozen_src55.ximg exists
[Mon Oct 31 22:19:34 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass1_tfrozen_src55_1.ximg exists
[Mon Oct 31 22:19:34 2011] Fit fullrun_ccd2_acisf10556_pi14-548_cl_pass1_tfrozen_src55 appears to have run properly
[Mon Oct 31 22:20:32 2011] Spatial fit model total counts = 63.999700, observed total counts = 64.000000
[Mon Oct 31 22:20:32 2011] Offset between fit and detection position for source 83 = 0.003970 pixels
[Mon Oct 31 22:20:32 2011] 63.162500 total counts/ 31.678700 bgd. counts: snr = 5.593755
Spatial fit parameters:
  Offset between fit and detection position for source 83 = 0.003970 pixels
  Position = (650.3, 122.9) = 17 45 25.72 -28 58 58.1
  Extent = 1.0 (0.7-1.4)", rotation angle = 0
  Source counts = 31.5 +/- 7.9
  Background counts = 31.7
  Rate = 0.0003 +/- 7e-05
[Mon Oct 31 22:20:33 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 22:20:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 22:20:33 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 22:20:33 2011] Source does appear to be extended
[Mon Oct 31 22:20:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 22:29:12 2011] Not overwriting source region fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src83_src.reg
[Mon Oct 31 22:29:12 2011] Extracting stamp from image fullrun_ccd2_acisf10556_pi14-548_cl_sm2.00.img.gz, (605, 78) - (696, 168)
[Mon Oct 31 22:29:12 2011] Writing fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src83.gif
[Mon Oct 31 22:34:58 2011] ../../acisf10556/products/events/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src83_src.evt and ../../acisf10556/products/events/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src83_bgd.evt exist, delete to re-create
[Mon Oct 31 22:34:58 2011] Size of ../../acisf10556/products/events/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src83_src.evt.gz[events] = 56 counts
[Mon Oct 31 22:34:58 2011] Mean chipx,y = (458.16, 1008.32)
[Mon Oct 31 22:34:58 2011] Mean tdetx,y = (4069.32, 3627.84)
[Mon Oct 31 22:34:58 2011] chipx,y range = (435.00-479.00, 989.00-1023.00)
[Mon Oct 31 22:34:58 2011] Size of ../../acisf10556/products/events/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src83_bgd.evt.gz[events] = 370 counts
[Mon Oct 31 22:34:58 2011] ../../acisf10556/products/images/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src83_src.img and ../../acisf10556/products/images/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src83_bgd.img exist, delete to re-create
[Mon Oct 31 22:34:58 2011] ../../acisf10556/products/spectra/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src83_src.pi and ../../acisf10556/products/spectra/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src83_bgd.pi exist, delete to re-create
[Mon Oct 31 22:34:58 2011] Not generating rmf since there are only 31 counts
[Mon Oct 31 22:35:11 2011] ../../acisf10556/products/lightcurves/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src83_src.lc and ../../acisf10556/products/lightcurves/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src83_bgd.lc exist, delete to re-create
[Mon Oct 31 22:38:37 2011] 188.146
[Mon Oct 31 22:44:09 2011] Updating aperture counts using extracted products
[Mon Oct 31 22:44:09 2011] Error reading totcts from fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src83_src.pi.gz
[Mon Oct 31 22:44:10 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 31 22:44:10 2011] Using photon index=1.80, rate=0.00028, arf fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src83.arf
[Mon Oct 31 22:44:10 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 31 22:44:10 2011] Updating source flux to 4.5e-15
[Mon Oct 31 22:46:16 2011] Source 83 has fewer than 100.000000 counts, skipping spectral fitting