[Mon Oct 31 22:12:17 2011] Detection parameters:
  Position = (255.4, 87.4) = 17 45 40.51 -28 59 15.4
  Extent = 0.5" x 0.5", rotation angle = 62 degrees
  Source counts = 61.6 +/- 10.1
  Background counts = 41.4
  Rate = 0.0005 +/- 9e-05

[Mon Oct 31 22:12:27 2011] Off-axis axis estimate = 0.74'
[Mon Oct 31 22:17:02 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 22:17:02 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Mon Oct 31 22:17:02 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.375
[Mon Oct 31 22:17:02 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 0.38"
[Mon Oct 31 22:17:09 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass0_src19.ximg exists
[Mon Oct 31 22:17:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10556_pi14-548_cl_pass0_src19.csv
[Mon Oct 31 22:17:09 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass0_src19_1.ximg exists
[Mon Oct 31 22:17:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10556_pi14-548_cl_pass0_src19.csv
[Mon Oct 31 22:17:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10556_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10556_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 22:17:14 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Mon Oct 31 22:17:14 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Mon Oct 31 22:17:14 2011] Fit fullrun_ccd2_acisf10556_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Mon Oct 31 22:18:13 2011] Spatial fit model total counts = 170.997000, observed total counts = 171.000000
[Mon Oct 31 22:18:13 2011] Offset between fit and detection position for source 52 = 0.458579 pixels
[Mon Oct 31 22:18:13 2011] 170.673900 total counts/ 123.601000 bgd. counts: snr = 4.234089
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 0.458579 pixels
  Position = (255.8, 87.6) = 17 45 40.52 -28 59 15.5
  Extent = 0.7 (0.6-1.1)", rotation angle = 0
  Source counts = 47.1 +/- 13.1
  Background counts = 123.6
  Rate = 0.0004 +/- 0.0001
[Mon Oct 31 22:18:14 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 22:18:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 22:18:14 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 22:18:14 2011] Source does appear to be extended
[Mon Oct 31 22:18:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 22:19:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 31 22:19:25 2011] Initial guess for spatial extent in simple fitting = 0.75"
[Mon Oct 31 22:19:25 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.979
[Mon Oct 31 22:19:25 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 0.75"
[Mon Oct 31 22:19:27 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass1_src19.ximg exists
[Mon Oct 31 22:19:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10556_pi14-548_cl_pass1_src19.csv
[Mon Oct 31 22:19:27 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass1_src19_1.ximg exists
[Mon Oct 31 22:19:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10556_pi14-548_cl_pass1_src19.csv
[Mon Oct 31 22:19:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10556_pi14-548_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10556_pi14-548_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 22:19:33 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Mon Oct 31 22:19:33 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Mon Oct 31 22:19:33 2011] Fit fullrun_ccd2_acisf10556_pi14-548_cl_pass1_tfrozen_src19 appears to have run properly
[Mon Oct 31 22:20:32 2011] Spatial fit model total counts = 168.640000, observed total counts = 169.000000
[Mon Oct 31 22:20:32 2011] Offset between fit and detection position for source 52 = 0.020443 pixels
[Mon Oct 31 22:20:32 2011] 166.528800 total counts/ 118.496000 bgd. counts: snr = 4.412514
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 0.020443 pixels
  Position = (255.8, 87.7) = 17 45 40.52 -28 59 15.5
  Extent = 0.8 (0.6-1.1)", rotation angle = 0
  Source counts = 48.0 +/- 12.9
  Background counts = 118.5
  Rate = 0.0004 +/- 0.0001
[Mon Oct 31 22:20:33 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 22:20:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 22:20:33 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 22:20:33 2011] Source does appear to be extended
[Mon Oct 31 22:20:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 22:29:11 2011] Not overwriting source region fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src52_src.reg
[Mon Oct 31 22:29:11 2011] Extracting stamp from image fullrun_ccd2_acisf10556_pi14-548_cl_sm2.00.img.gz, (221, 53) - (291, 123)
[Mon Oct 31 22:29:11 2011] Writing fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src52.gif
[Mon Oct 31 22:31:00 2011] ../../acisf10556/products/events/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src52_src.evt and ../../acisf10556/products/events/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src52_bgd.evt exist, delete to re-create
[Mon Oct 31 22:31:00 2011] Size of ../../acisf10556/products/events/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src52_src.evt.gz[events] = 113 counts
[Mon Oct 31 22:31:00 2011] Mean chipx,y = (64.25, 964.03)
[Mon Oct 31 22:31:00 2011] Mean tdetx,y = (4025.03, 4021.75)
[Mon Oct 31 22:31:00 2011] chipx,y range = (43.00-85.00, 945.00-986.00)
[Mon Oct 31 22:31:00 2011] Size of ../../acisf10556/products/events/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src52_bgd.evt.gz[events] = 557 counts
[Mon Oct 31 22:31:00 2011] ../../acisf10556/products/images/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src52_src.img and ../../acisf10556/products/images/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src52_bgd.img exist, delete to re-create
[Mon Oct 31 22:31:00 2011] ../../acisf10556/products/spectra/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src52_src.pi and ../../acisf10556/products/spectra/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src52_bgd.pi exist, delete to re-create
[Mon Oct 31 22:31:00 2011] Not generating rmf since there are only 48 counts
[Mon Oct 31 22:31:08 2011] ../../acisf10556/products/lightcurves/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src52_src.lc and ../../acisf10556/products/lightcurves/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src52_bgd.lc exist, delete to re-create
[Mon Oct 31 22:38:32 2011] 202.633
[Mon Oct 31 22:44:08 2011] Updating aperture counts using extracted products
[Mon Oct 31 22:44:08 2011] Error reading totcts from fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src52_src.pi.gz
[Mon Oct 31 22:44:10 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 31 22:44:10 2011] Using photon index=1.80, rate=0.000427, arf fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src52.arf
[Mon Oct 31 22:44:10 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 31 22:44:10 2011] Updating source flux to 6.5e-15
[Mon Oct 31 22:46:16 2011] Source 52 has fewer than 100.000000 counts, skipping spectral fitting