[Mon Oct 31 22:12:08 2011] Detection parameters:
  Position = (372.6, 406.7) = 17 45 36.12 -28 56 38.3
  Extent = 0.8" x 0.6", rotation angle = 124 degrees
  Source counts = 582.5 +/- 24.7
  Background counts = 25.5
  Rate = 0.005 +/- 0.0002

[Mon Oct 31 22:12:27 2011] Off-axis axis estimate = 3.44'
[Mon Oct 31 22:17:02 2011] Using EEF radius (= 0.68 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 22:17:02 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 31 22:17:02 2011] Initial guess for spatial extent in simple fitting = 0.68"
[Mon Oct 31 22:17:02 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.853
[Mon Oct 31 22:17:02 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.68"
[Mon Oct 31 22:17:09 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 31 22:17:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10556_pi14-548_cl_pass0_src1.csv
[Mon Oct 31 22:17:09 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 31 22:17:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10556_pi14-548_cl_pass0_src1.csv
[Mon Oct 31 22:17:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10556_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10556_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 22:17:13 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 31 22:17:13 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 31 22:17:13 2011] Fit fullrun_ccd2_acisf10556_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 31 22:18:13 2011] Spatial fit model total counts = 613.993000, observed total counts = 614.000000
[Mon Oct 31 22:18:13 2011] Offset between fit and detection position for source 3 = 0.703386 pixels
[Mon Oct 31 22:18:13 2011] 613.115700 total counts/ 48.682700 bgd. counts: snr = 80.895631
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.703386 pixels
  Position = (373.1, 407.1) = 17 45 36.12 -28 56 38.3
  Extent = 0.8 (0.7-0.8)", rotation angle = 0
  Source counts = 564.4 +/- 24.8
  Background counts = 48.7
  Rate = 0.005 +/- 0.0002
[Mon Oct 31 22:18:14 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 22:18:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 22:18:14 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 22:18:14 2011] Source does appear to be extended
[Mon Oct 31 22:18:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 22:19:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 31 22:19:25 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 31 22:19:25 2011] Initial guess for spatial extent in simple fitting = 0.78"
[Mon Oct 31 22:19:25 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.924
[Mon Oct 31 22:19:25 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.78"
[Mon Oct 31 22:19:26 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 31 22:19:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10556_pi14-548_cl_pass1_src1.csv
[Mon Oct 31 22:19:26 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 31 22:19:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10556_pi14-548_cl_pass1_src1.csv
[Mon Oct 31 22:19:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10556_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10556_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 22:19:32 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 31 22:19:33 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 31 22:19:33 2011] Fit fullrun_ccd2_acisf10556_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 31 22:20:32 2011] Spatial fit model total counts = 613.993000, observed total counts = 614.000000
[Mon Oct 31 22:20:32 2011] Offset between fit and detection position for source 3 = 0.001805 pixels
[Mon Oct 31 22:20:32 2011] 613.108900 total counts/ 48.909900 bgd. counts: snr = 80.674062
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.001805 pixels
  Position = (373.1, 407.1) = 17 45 36.12 -28 56 38.3
  Extent = 0.8 (0.7-0.8)", rotation angle = 0
  Source counts = 564.2 +/- 24.8
  Background counts = 48.9
  Rate = 0.005 +/- 0.0002
[Mon Oct 31 22:20:33 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 22:20:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 22:20:33 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 22:20:33 2011] Source does appear to be extended
[Mon Oct 31 22:20:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 22:29:11 2011] Not overwriting source region fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src3_src.reg
[Mon Oct 31 22:29:11 2011] Extracting stamp from image fullrun_ccd2_acisf10556_pi14-548_cl_sm2.00.img.gz, (338, 372) - (409, 443)
[Mon Oct 31 22:29:11 2011] Writing fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src3.gif
[Mon Oct 31 22:29:16 2011] ../../acisf10556/products/events/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src3_src.evt and ../../acisf10556/products/events/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Mon Oct 31 22:29:16 2011] Size of ../../acisf10556/products/events/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src3_src.evt.gz[events] = 594 counts
[Mon Oct 31 22:29:16 2011] Mean chipx,y = (239.02, 673.52)
[Mon Oct 31 22:29:16 2011] Mean tdetx,y = (3734.52, 3846.98)
[Mon Oct 31 22:29:16 2011] chipx,y range = (222.00-259.00, 653.00-695.00)
[Mon Oct 31 22:29:16 2011] Size of ../../acisf10556/products/events/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 169 counts
[Mon Oct 31 22:29:16 2011] ../../acisf10556/products/images/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src3_src.img and ../../acisf10556/products/images/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Mon Oct 31 22:29:16 2011] ../../acisf10556/products/spectra/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src3_src.pi and ../../acisf10556/products/spectra/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Mon Oct 31 22:29:21 2011] ../../acisf10556/products/lightcurves/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src3_src.lc and ../../acisf10556/products/lightcurves/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Mon Oct 31 22:38:29 2011] Keeping rmf generated by specextract
[Mon Oct 31 22:38:30 2011] 164.933
[Mon Oct 31 22:44:08 2011] Updating aperture counts using extracted products
[Mon Oct 31 22:44:08 2011] Error reading totcts from fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src3_src.pi.gz
[Mon Oct 31 22:44:09 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 31 22:44:09 2011] Using photon index=1.80, rate=0.00501, arf fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src3.arf
[Mon Oct 31 22:44:09 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 31 22:44:09 2011] Updating source flux to 9.3e-14
[Mon Oct 31 22:46:30 2011] Reading fit data from acisf10556/analysis//spectral/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src3_pl.csv
[Mon Oct 31 22:46:30 2011] Spectral fit parameter nH value = 8.64149e+22
[Mon Oct 31 22:46:30 2011] Spectral fit parameter PhoIndex value = 2.57124
[Mon Oct 31 22:46:30 2011] Failed to get F(0.3-8.0) from acisf10556/analysis//spectral/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Mon Oct 31 22:46:30 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 31 22:46:30 2011] Using Nh = 8.6e+22, photon index=2.57, rate=0.00501, arf fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src3.arf
[Mon Oct 31 22:46:30 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 31 22:46:30 2011] Updating source flux to 1.4e-13