[Mon Oct 31 22:12:14 2011] Detection parameters:
  Position = (691.9, 149.1) = 17 45 24.15 -28 58 44.9
  Extent = 0.9" x 0.5", rotation angle = 98 degrees
  Source counts = 33.9 +/- 6.7
  Background counts = 11.1
  Rate = 0.0003 +/- 6e-05

[Mon Oct 31 22:12:27 2011] Off-axis axis estimate = 3.63'
[Mon Oct 31 22:17:02 2011] Using EEF radius (= 0.72 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 22:17:02 2011] Initial guess for spatial extent in simple fitting = 0.72"
[Mon Oct 31 22:17:02 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.028
[Mon Oct 31 22:17:02 2011] Giving source the simple spatial ID 46 for pass 0, mean size = 0.72"
[Mon Oct 31 22:17:10 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass0_src46.ximg exists
[Mon Oct 31 22:17:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10556_pi14-548_cl_pass0_src46.csv
[Mon Oct 31 22:17:10 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass0_src46_1.ximg exists
[Mon Oct 31 22:17:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10556_pi14-548_cl_pass0_src46.csv
[Mon Oct 31 22:17:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10556_pi14-548_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10556_pi14-548_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 22:17:14 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass0_tfrozen_src46.ximg exists
[Mon Oct 31 22:17:14 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass0_tfrozen_src46_1.ximg exists
[Mon Oct 31 22:17:14 2011] Fit fullrun_ccd2_acisf10556_pi14-548_cl_pass0_tfrozen_src46 appears to have run properly
[Mon Oct 31 22:18:13 2011] Spatial fit model total counts = 63.569400, observed total counts = 64.000000
[Mon Oct 31 22:18:13 2011] Offset between fit and detection position for source 23 = 0.770108 pixels
[Mon Oct 31 22:18:13 2011] 64.816100 total counts/ 30.010800 bgd. counts: snr = 6.353406
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.770108 pixels
  Position = (692.6, 149.5) = 17 45 24.14 -28 58 45.0
  Extent = 0.7 (0.5-1.0)", rotation angle = 0
  Source counts = 34.8 +/- 8.1
  Background counts = 30.0
  Rate = 0.0003 +/- 7e-05
[Mon Oct 31 22:18:14 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 22:18:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 22:18:14 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 22:18:14 2011] Source does appear to be extended
[Mon Oct 31 22:18:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 22:19:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 31 22:19:25 2011] Initial guess for spatial extent in simple fitting = 0.67"
[Mon Oct 31 22:19:25 2011] source mask rpix=1.4, npix_max = 13, mask sum = 9, frac = 0.651
[Mon Oct 31 22:19:25 2011] Giving source the simple spatial ID 45 for pass 1, mean size = 0.67"
[Mon Oct 31 22:19:27 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass1_src45.ximg exists
[Mon Oct 31 22:19:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10556_pi14-548_cl_pass1_src45.csv
[Mon Oct 31 22:19:27 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass1_src45_1.ximg exists
[Mon Oct 31 22:19:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10556_pi14-548_cl_pass1_src45.csv
[Mon Oct 31 22:19:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10556_pi14-548_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10556_pi14-548_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 22:19:34 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass1_tfrozen_src45.ximg exists
[Mon Oct 31 22:19:34 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass1_tfrozen_src45_1.ximg exists
[Mon Oct 31 22:19:34 2011] Fit fullrun_ccd2_acisf10556_pi14-548_cl_pass1_tfrozen_src45 appears to have run properly
[Mon Oct 31 22:20:32 2011] Spatial fit model total counts = 63.569400, observed total counts = 64.000000
[Mon Oct 31 22:20:32 2011] Offset between fit and detection position for source 23 = 0.000000 pixels
[Mon Oct 31 22:20:32 2011] 64.816100 total counts/ 30.010800 bgd. counts: snr = 6.353406
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.000000 pixels
  Position = (692.6, 149.5) = 17 45 24.14 -28 58 45.0
  Extent = 0.7 (0.5-1.0)", rotation angle = 0
  Source counts = 34.8 +/- 8.1
  Background counts = 30.0
  Rate = 0.0003 +/- 7e-05
[Mon Oct 31 22:20:33 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 22:20:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 22:20:33 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 22:20:33 2011] Source does appear to be extended
[Mon Oct 31 22:20:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 22:29:12 2011] Not overwriting source region fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src23_src.reg
[Mon Oct 31 22:29:12 2011] Extracting stamp from image fullrun_ccd2_acisf10556_pi14-548_cl_sm2.00.img.gz, (662, 119) - (723, 180)
[Mon Oct 31 22:29:12 2011] Writing fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src23.gif
[Mon Oct 31 22:34:30 2011] ../../acisf10556/products/events/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src23_src.evt and ../../acisf10556/products/events/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src23_bgd.evt exist, delete to re-create
[Mon Oct 31 22:34:30 2011] Size of ../../acisf10556/products/events/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src23_src.evt.gz[events] = 48 counts
[Mon Oct 31 22:34:30 2011] Mean chipx,y = (505.88, 988.79)
[Mon Oct 31 22:34:30 2011] Mean tdetx,y = (4049.79, 3580.12)
[Mon Oct 31 22:34:30 2011] chipx,y range = (484.00-525.00, 967.00-1005.00)
[Mon Oct 31 22:34:30 2011] Size of ../../acisf10556/products/events/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 152 counts
[Mon Oct 31 22:34:30 2011] ../../acisf10556/products/images/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src23_src.img and ../../acisf10556/products/images/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src23_bgd.img exist, delete to re-create
[Mon Oct 31 22:34:30 2011] ../../acisf10556/products/spectra/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src23_src.pi and ../../acisf10556/products/spectra/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src23_bgd.pi exist, delete to re-create
[Mon Oct 31 22:34:30 2011] Not generating rmf since there are only 34 counts
[Mon Oct 31 22:34:32 2011] ../../acisf10556/products/lightcurves/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src23_src.lc and ../../acisf10556/products/lightcurves/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src23_bgd.lc exist, delete to re-create
[Mon Oct 31 22:38:37 2011] 172.343
[Mon Oct 31 22:44:09 2011] Updating aperture counts using extracted products
[Mon Oct 31 22:44:09 2011] Error reading totcts from fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src23_src.pi.gz
[Mon Oct 31 22:44:10 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 31 22:44:10 2011] Using photon index=1.80, rate=0.000309, arf fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src23.arf
[Mon Oct 31 22:44:10 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 31 22:44:10 2011] Updating source flux to 5.4e-15
[Mon Oct 31 22:46:16 2011] Source 23 has fewer than 100.000000 counts, skipping spectral fitting