[Mon Oct 31 22:12:26 2011] Detection parameters:
  Position = (223.3, 495.9) = 17 45 41.71 -28 55 54.4
  Extent = 0.9" x 0.7", rotation angle = 98 degrees
  Source counts = 20.1 +/- 5.5
  Background counts = 9.9
  Rate = 0.0002 +/- 5e-05

[Mon Oct 31 22:12:27 2011] Off-axis axis estimate = 4.10'
[Mon Oct 31 22:17:02 2011] Using EEF radius (= 0.86 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 22:17:02 2011] Initial guess for spatial extent in simple fitting = 0.86"
[Mon Oct 31 22:17:02 2011] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.990
[Mon Oct 31 22:17:02 2011] Giving source the simple spatial ID 68 for pass 0, mean size = 0.86"
[Mon Oct 31 22:17:13 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass0_src68.ximg exists
[Mon Oct 31 22:17:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10556_pi14-548_cl_pass0_src68.csv
[Mon Oct 31 22:17:13 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass0_src68_1.ximg exists
[Mon Oct 31 22:17:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10556_pi14-548_cl_pass0_src68.csv
[Mon Oct 31 22:17:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10556_pi14-548_cl_pass0_src68_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10556_pi14-548_cl_pass0_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 22:17:15 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass0_tfrozen_src68.ximg exists
[Mon Oct 31 22:17:15 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass0_tfrozen_src68_1.ximg exists
[Mon Oct 31 22:17:15 2011] Fit fullrun_ccd2_acisf10556_pi14-548_cl_pass0_tfrozen_src68 appears to have run properly
[Mon Oct 31 22:18:13 2011] Spatial fit model total counts = 46.828500, observed total counts = 47.000000
[Mon Oct 31 22:18:13 2011] Offset between fit and detection position for source 109 = 0.535510 pixels
[Mon Oct 31 22:18:13 2011] 47.071000 total counts/ 18.139000 bgd. counts: snr = 6.793159
Spatial fit parameters:
  Offset between fit and detection position for source 109 = 0.535510 pixels
  Position = (222.8, 496.0) = 17 45 41.75 -28 55 54.6
  Extent = 1.2 (0.7-1.6)", rotation angle = 0
  Source counts = 28.9 +/- 6.9
  Background counts = 18.1
  Rate = 0.0003 +/- 6e-05
[Mon Oct 31 22:18:14 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 22:18:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 22:18:14 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 22:18:14 2011] Source does appear to be extended
[Mon Oct 31 22:18:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 22:19:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 31 22:19:25 2011] Initial guess for spatial extent in simple fitting = 1.17"
[Mon Oct 31 22:19:25 2011] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.093
[Mon Oct 31 22:19:25 2011] Giving source the simple spatial ID 65 for pass 1, mean size = 1.17"
[Mon Oct 31 22:19:27 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass1_src65.ximg exists
[Mon Oct 31 22:19:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10556_pi14-548_cl_pass1_src65.csv
[Mon Oct 31 22:19:28 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass1_src65_1.ximg exists
[Mon Oct 31 22:19:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10556_pi14-548_cl_pass1_src65.csv
[Mon Oct 31 22:19:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10556_pi14-548_cl_pass1_src65_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10556_pi14-548_cl_pass1_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 22:19:34 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass1_tfrozen_src65.ximg exists
[Mon Oct 31 22:19:34 2011] fullrun_ccd2_acisf10556_pi14-548_cl_pass1_tfrozen_src65_1.ximg exists
[Mon Oct 31 22:19:34 2011] Fit fullrun_ccd2_acisf10556_pi14-548_cl_pass1_tfrozen_src65 appears to have run properly
[Mon Oct 31 22:20:32 2011] Spatial fit model total counts = 45.991200, observed total counts = 46.000000
[Mon Oct 31 22:20:32 2011] Offset between fit and detection position for source 109 = 0.092021 pixels
[Mon Oct 31 22:20:32 2011] 46.155500 total counts/ 16.975500 bgd. counts: snr = 7.082295
Spatial fit parameters:
  Offset between fit and detection position for source 109 = 0.092021 pixels
  Position = (222.9, 496.0) = 17 45 41.75 -28 55 54.6
  Extent = 1.2 (0.6-1.8)", rotation angle = 0
  Source counts = 29.2 +/- 6.8
  Background counts = 17.0
  Rate = 0.0003 +/- 6e-05
[Mon Oct 31 22:20:33 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 22:20:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 22:20:33 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 22:20:33 2011] Source does appear to be extended
[Mon Oct 31 22:20:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 22:29:12 2011] Not overwriting source region fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src109_src.reg
[Mon Oct 31 22:29:12 2011] Extracting stamp from image fullrun_ccd2_acisf10556_pi14-548_cl_sm2.00.img.gz, (169, 442) - (277, 550)
[Mon Oct 31 22:29:12 2011] Writing fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src109.gif
[Mon Oct 31 22:35:45 2011] ../../acisf10556/products/events/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src109_src.evt and ../../acisf10556/products/events/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src109_bgd.evt exist, delete to re-create
[Mon Oct 31 22:35:45 2011] Size of ../../acisf10556/products/events/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src109_src.evt.gz[events] = 54 counts
[Mon Oct 31 22:35:45 2011] Mean chipx,y = (107.28, 555.94)
[Mon Oct 31 22:35:45 2011] Mean tdetx,y = (3616.94, 3978.72)
[Mon Oct 31 22:35:45 2011] chipx,y range = (90.00-131.00, 537.00-583.00)
[Mon Oct 31 22:35:47 2011] Size of ../../acisf10556/products/events/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src109_bgd.evt.gz[events] = 320 counts
[Mon Oct 31 22:35:47 2011] ../../acisf10556/products/images/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src109_src.img and ../../acisf10556/products/images/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src109_bgd.img exist, delete to re-create
[Mon Oct 31 22:35:47 2011] ../../acisf10556/products/spectra/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src109_src.pi and ../../acisf10556/products/spectra/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src109_bgd.pi exist, delete to re-create
[Mon Oct 31 22:35:47 2011] Not generating rmf since there are only 29 counts
[Mon Oct 31 22:35:50 2011] ../../acisf10556/products/lightcurves/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src109_src.lc and ../../acisf10556/products/lightcurves/fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src109_bgd.lc exist, delete to re-create
[Mon Oct 31 22:38:37 2011] 179.05
[Mon Oct 31 22:44:09 2011] Updating aperture counts using extracted products
[Mon Oct 31 22:44:09 2011] Error reading totcts from fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src109_src.pi.gz
[Mon Oct 31 22:44:10 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 31 22:44:10 2011] Using photon index=1.80, rate=0.000259, arf fullrun_ccd2_acisf10556_pi14-548_pass1_cl_src109.arf
[Mon Oct 31 22:44:10 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 31 22:44:10 2011] Updating source flux to 4.4e-15
[Mon Oct 31 22:46:16 2011] Source 109 has fewer than 100.000000 counts, skipping spectral fitting