[Mon Oct 31 22:12:03 2011] Detection parameters:
  Position = (1115.1, 526.2) = 17 45 39.47 -29 5 35.3
  Extent = 0.9" x 0.8", rotation angle = 99 degrees
  Source counts = 25.4 +/- 5.8
  Background counts = 8.6
  Rate = 0.0002 +/- 5e-05

[Mon Oct 31 22:12:07 2011] Off-axis axis estimate = 5.61'
[Mon Oct 31 22:16:54 2011] Using EEF radius (= 1.44 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 22:16:54 2011] Initial guess for spatial extent in simple fitting = 1.44"
[Mon Oct 31 22:16:54 2011] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.041
[Mon Oct 31 22:16:54 2011] Giving source the simple spatial ID 41 for pass 0, mean size = 1.44"
[Mon Oct 31 22:16:56 2011] fullrun_ccd1_acisf10556_pi14-548_cl_pass0_src41.ximg exists
[Mon Oct 31 22:16:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10556_pi14-548_cl_pass0_src41.csv
[Mon Oct 31 22:16:56 2011] fullrun_ccd1_acisf10556_pi14-548_cl_pass0_src41_1.ximg exists
[Mon Oct 31 22:16:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10556_pi14-548_cl_pass0_src41.csv
[Mon Oct 31 22:16:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10556_pi14-548_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10556_pi14-548_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 22:17:00 2011] fullrun_ccd1_acisf10556_pi14-548_cl_pass0_tfrozen_src41.ximg exists
[Mon Oct 31 22:17:00 2011] fullrun_ccd1_acisf10556_pi14-548_cl_pass0_tfrozen_src41_1.ximg exists
[Mon Oct 31 22:17:00 2011] Fit fullrun_ccd1_acisf10556_pi14-548_cl_pass0_tfrozen_src41 appears to have run properly
[Mon Oct 31 22:17:57 2011] Spatial fit model total counts = 43.968500, observed total counts = 44.000000
[Mon Oct 31 22:17:57 2011] Offset between fit and detection position for source 48 = 0.829039 pixels
[Mon Oct 31 22:17:57 2011] 42.829500 total counts/ 13.977000 bgd. counts: snr = 7.717497
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 0.829039 pixels
  Position = (1115.8, 526.6) = 17 45 39.47 -29 5 35.3
  Extent = 1.0 (0.8-1.4)", rotation angle = 0
  Source counts = 28.9 +/- 6.5
  Background counts = 14.0
  Rate = 0.0003 +/- 6e-05
[Mon Oct 31 22:17:57 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 22:17:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 22:17:57 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 22:17:57 2011] Source does appear to be extended
[Mon Oct 31 22:17:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 22:19:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 31 22:19:21 2011] Initial guess for spatial extent in simple fitting = 1.04"
[Mon Oct 31 22:19:21 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.909
[Mon Oct 31 22:19:21 2011] Giving source the simple spatial ID 40 for pass 1, mean size = 1.04"
[Mon Oct 31 22:19:23 2011] fullrun_ccd1_acisf10556_pi14-548_cl_pass1_src40.ximg exists
[Mon Oct 31 22:19:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10556_pi14-548_cl_pass1_src40.csv
[Mon Oct 31 22:19:23 2011] fullrun_ccd1_acisf10556_pi14-548_cl_pass1_src40_1.ximg exists
[Mon Oct 31 22:19:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10556_pi14-548_cl_pass1_src40.csv
[Mon Oct 31 22:19:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10556_pi14-548_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10556_pi14-548_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 22:19:24 2011] fullrun_ccd1_acisf10556_pi14-548_cl_pass1_tfrozen_src40.ximg exists
[Mon Oct 31 22:19:24 2011] fullrun_ccd1_acisf10556_pi14-548_cl_pass1_tfrozen_src40_1.ximg exists
[Mon Oct 31 22:19:24 2011] Fit fullrun_ccd1_acisf10556_pi14-548_cl_pass1_tfrozen_src40 appears to have run properly
[Mon Oct 31 22:20:15 2011] Spatial fit model total counts = 43.999800, observed total counts = 44.000000
[Mon Oct 31 22:20:15 2011] Offset between fit and detection position for source 48 = 0.129171 pixels
[Mon Oct 31 22:20:15 2011] 43.429600 total counts/ 17.478000 bgd. counts: snr = 6.207522
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 0.129171 pixels
  Position = (1115.8, 526.5) = 17 45 39.47 -29 5 35.4
  Extent = 1.0 (0.7-1.4)", rotation angle = 0
  Source counts = 26.0 +/- 6.6
  Background counts = 17.5
  Rate = 0.0002 +/- 6e-05
[Mon Oct 31 22:20:15 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 22:20:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 22:20:15 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 22:20:15 2011] Source does appear to be extended
[Mon Oct 31 22:20:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 22:25:28 2011] Not overwriting source region fullrun_ccd1_acisf10556_pi14-548_pass1_cl_src48_src.reg
[Mon Oct 31 22:25:28 2011] Extracting stamp from image fullrun_ccd1_acisf10556_pi14-548_cl_sm2.00.img.gz, (1070, 480) - (1162, 573)
[Mon Oct 31 22:25:28 2011] Writing fullrun_ccd1_acisf10556_pi14-548_pass1_cl_src48.gif
[Mon Oct 31 22:27:42 2011] ../../acisf10556/products/events/fullrun_ccd1_acisf10556_pi14-548_pass1_cl_src48_src.evt and ../../acisf10556/products/events/fullrun_ccd1_acisf10556_pi14-548_pass1_cl_src48_bgd.evt exist, delete to re-create
[Mon Oct 31 22:27:42 2011] Size of ../../acisf10556/products/events/fullrun_ccd1_acisf10556_pi14-548_pass1_cl_src48_src.evt.gz[events] = 38 counts
[Mon Oct 31 22:27:42 2011] Mean chipx,y = (33.21, 341.79)
[Mon Oct 31 22:27:42 2011] Mean tdetx,y = (4790.21, 4140.21)
[Mon Oct 31 22:27:42 2011] chipx,y range = (15.00-51.00, 320.00-360.00)
[Mon Oct 31 22:27:42 2011] Size of ../../acisf10556/products/events/fullrun_ccd1_acisf10556_pi14-548_pass1_cl_src48_bgd.evt.gz[events] = 204 counts
[Mon Oct 31 22:27:42 2011] ../../acisf10556/products/images/fullrun_ccd1_acisf10556_pi14-548_pass1_cl_src48_src.img and ../../acisf10556/products/images/fullrun_ccd1_acisf10556_pi14-548_pass1_cl_src48_bgd.img exist, delete to re-create
[Mon Oct 31 22:27:42 2011] ../../acisf10556/products/spectra/fullrun_ccd1_acisf10556_pi14-548_pass1_cl_src48_src.pi and ../../acisf10556/products/spectra/fullrun_ccd1_acisf10556_pi14-548_pass1_cl_src48_bgd.pi exist, delete to re-create
[Mon Oct 31 22:27:42 2011] Not generating rmf since there are only 25 counts
[Mon Oct 31 22:27:45 2011] ../../acisf10556/products/lightcurves/fullrun_ccd1_acisf10556_pi14-548_pass1_cl_src48_src.lc and ../../acisf10556/products/lightcurves/fullrun_ccd1_acisf10556_pi14-548_pass1_cl_src48_bgd.lc exist, delete to re-create
[Mon Oct 31 22:29:09 2011] 188.034
[Mon Oct 31 22:44:07 2011] Updating aperture counts using extracted products
[Mon Oct 31 22:44:07 2011] Error reading totcts from fullrun_ccd1_acisf10556_pi14-548_pass1_cl_src48_src.pi.gz
[Mon Oct 31 22:44:08 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 31 22:44:08 2011] Using photon index=1.80, rate=0.000231, arf fullrun_ccd1_acisf10556_pi14-548_pass1_cl_src48.arf
[Mon Oct 31 22:44:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 31 22:44:08 2011] Updating source flux to 3.7e-15
[Mon Oct 31 22:45:54 2011] Source 48 has fewer than 100.000000 counts, skipping spectral fitting