[Mon Oct 31 22:11:55 2011] Detection parameters:
  Position = (1017.6, 893.2) = 17 45 50.21 -28 54 16.3
  Extent = 1.1" x 0.8", rotation angle = 148 degrees
  Source counts = 40.6 +/- 8.7
  Background counts = 34.4
  Rate = 0.0004 +/- 8e-05

[Mon Oct 31 22:12:00 2011] Off-axis axis estimate = 6.15'
[Mon Oct 31 22:16:48 2011] Using EEF radius (= 1.71 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 22:16:48 2011] Initial guess for spatial extent in simple fitting = 1.71"
[Mon Oct 31 22:16:48 2011] source mask rpix=3.5, npix_max = 63, mask sum = 64, frac = 1.015
[Mon Oct 31 22:16:48 2011] Giving source the simple spatial ID 35 for pass 0, mean size = 1.71"
[Mon Oct 31 22:16:50 2011] fullrun_ccd0_acisf10556_pi14-548_cl_pass0_src35.ximg exists
[Mon Oct 31 22:16:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10556_pi14-548_cl_pass0_src35.csv
[Mon Oct 31 22:16:50 2011] fullrun_ccd0_acisf10556_pi14-548_cl_pass0_src35_1.ximg exists
[Mon Oct 31 22:16:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10556_pi14-548_cl_pass0_src35.csv
[Mon Oct 31 22:16:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10556_pi14-548_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10556_pi14-548_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 22:16:53 2011] fullrun_ccd0_acisf10556_pi14-548_cl_pass0_tfrozen_src35.ximg exists
[Mon Oct 31 22:16:53 2011] fullrun_ccd0_acisf10556_pi14-548_cl_pass0_tfrozen_src35_1.ximg exists
[Mon Oct 31 22:16:53 2011] Fit fullrun_ccd0_acisf10556_pi14-548_cl_pass0_tfrozen_src35 appears to have run properly
[Mon Oct 31 22:17:47 2011] Warning: source 34 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 35 at 14.675597 pixels away
[Mon Oct 31 22:17:47 2011] Spatial fit model total counts = 109.781000, observed total counts = 102.000000
[Mon Oct 31 22:17:47 2011] Offset between fit and detection position for source 35 = 0.208552 pixels
[Mon Oct 31 22:17:47 2011] 111.027200 total counts/ 78.437000 bgd. counts: snr = 3.679820
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.208552 pixels
  Position = (1017.8, 893.2) = 17 45 50.22 -28 54 16.6
  Extent = 0.8 (0.6-1.2)", rotation angle = 0
  Source counts = 32.6 +/- 10.5
  Background counts = 78.4
  Rate = 0.0003 +/- 9e-05
[Mon Oct 31 22:17:47 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 22:17:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 22:17:47 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 22:17:47 2011] Source does appear to be extended
[Mon Oct 31 22:17:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 22:19:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 31 22:19:13 2011] Initial guess for spatial extent in simple fitting = 0.85"
[Mon Oct 31 22:19:13 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.808
[Mon Oct 31 22:19:13 2011] Giving source the simple spatial ID 32 for pass 1, mean size = 0.85"
[Mon Oct 31 22:19:16 2011] fullrun_ccd0_acisf10556_pi14-548_cl_pass1_src32.ximg exists
[Mon Oct 31 22:19:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10556_pi14-548_cl_pass1_src32.csv
[Mon Oct 31 22:19:16 2011] fullrun_ccd0_acisf10556_pi14-548_cl_pass1_src32_1.ximg exists
[Mon Oct 31 22:19:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10556_pi14-548_cl_pass1_src32.csv
[Mon Oct 31 22:19:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10556_pi14-548_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10556_pi14-548_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 22:19:19 2011] fullrun_ccd0_acisf10556_pi14-548_cl_pass1_tfrozen_src32.ximg exists
[Mon Oct 31 22:19:19 2011] fullrun_ccd0_acisf10556_pi14-548_cl_pass1_tfrozen_src32_1.ximg exists
[Mon Oct 31 22:19:19 2011] Fit fullrun_ccd0_acisf10556_pi14-548_cl_pass1_tfrozen_src32 appears to have run properly
[Mon Oct 31 22:20:05 2011] Spatial fit model total counts = 82.400900, observed total counts = 77.000000
[Mon Oct 31 22:20:05 2011] Offset between fit and detection position for source 35 = 0.076090 pixels
[Mon Oct 31 22:20:05 2011] 83.665300 total counts/ 53.471700 bgd. counts: snr = 4.129076
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.076090 pixels
  Position = (1017.8, 893.1) = 17 45 50.22 -28 54 16.6
  Extent = 0.8 (0.6-1.2)", rotation angle = 0
  Source counts = 30.2 +/- 9.1
  Background counts = 53.5
  Rate = 0.0003 +/- 8e-05
[Mon Oct 31 22:20:05 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 22:20:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 22:20:05 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 22:20:05 2011] Source does appear to be extended
[Mon Oct 31 22:20:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 22:21:29 2011] Not overwriting source region fullrun_ccd0_acisf10556_pi14-548_pass1_cl_src35_src.reg
[Mon Oct 31 22:21:29 2011] Extracting stamp from image fullrun_ccd0_acisf10556_pi14-548_cl_sm2.00.img.gz, (981, 856) - (1055, 930)
[Mon Oct 31 22:21:29 2011] Writing fullrun_ccd0_acisf10556_pi14-548_pass1_cl_src35.gif
[Mon Oct 31 22:23:12 2011] ../../acisf10556/products/events/fullrun_ccd0_acisf10556_pi14-548_pass1_cl_src35_src.evt and ../../acisf10556/products/events/fullrun_ccd0_acisf10556_pi14-548_pass1_cl_src35_bgd.evt exist, delete to re-create
[Mon Oct 31 22:23:12 2011] Size of ../../acisf10556/products/events/fullrun_ccd0_acisf10556_pi14-548_pass1_cl_src35_src.evt.gz[events] = 54 counts
[Mon Oct 31 22:23:12 2011] Mean chipx,y = (972.59, 318.26)
[Mon Oct 31 22:23:12 2011] Mean tdetx,y = (3379.26, 4159.41)
[Mon Oct 31 22:23:12 2011] chipx,y range = (951.00-991.00, 301.00-337.00)
[Mon Oct 31 22:23:12 2011] Size of ../../acisf10556/products/events/fullrun_ccd0_acisf10556_pi14-548_pass1_cl_src35_bgd.evt.gz[events] = 226 counts
[Mon Oct 31 22:23:12 2011] ../../acisf10556/products/images/fullrun_ccd0_acisf10556_pi14-548_pass1_cl_src35_src.img and ../../acisf10556/products/images/fullrun_ccd0_acisf10556_pi14-548_pass1_cl_src35_bgd.img exist, delete to re-create
[Mon Oct 31 22:23:12 2011] ../../acisf10556/products/spectra/fullrun_ccd0_acisf10556_pi14-548_pass1_cl_src35_src.pi and ../../acisf10556/products/spectra/fullrun_ccd0_acisf10556_pi14-548_pass1_cl_src35_bgd.pi exist, delete to re-create
[Mon Oct 31 22:23:12 2011] Not generating rmf since there are only 30 counts
[Mon Oct 31 22:23:14 2011] ../../acisf10556/products/lightcurves/fullrun_ccd0_acisf10556_pi14-548_pass1_cl_src35_src.lc and ../../acisf10556/products/lightcurves/fullrun_ccd0_acisf10556_pi14-548_pass1_cl_src35_bgd.lc exist, delete to re-create
[Mon Oct 31 22:25:26 2011] 166.834
[Mon Oct 31 22:44:05 2011] Updating aperture counts using extracted products
[Mon Oct 31 22:44:05 2011] Error reading totcts from fullrun_ccd0_acisf10556_pi14-548_pass1_cl_src35_src.pi.gz
[Mon Oct 31 22:44:06 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 31 22:44:06 2011] Using photon index=1.80, rate=0.000268, arf fullrun_ccd0_acisf10556_pi14-548_pass1_cl_src35.arf
[Mon Oct 31 22:44:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 31 22:44:06 2011] Updating source flux to 4.8e-15
[Mon Oct 31 22:44:24 2011] Source 35 has fewer than 100.000000 counts, skipping spectral fitting