[Mon Oct 31 22:11:54 2011] Detection parameters:
  Position = (971.6, 1024.1) = 17 45 51.93 -28 53 11.9
  Extent = 2.4" x 2.0", rotation angle = 147 degrees
  Source counts = 298.4 +/- 20.5
  Background counts = 120.6
  Rate = 0.003 +/- 0.0002

[Mon Oct 31 22:12:00 2011] Off-axis axis estimate = 7.29'
[Mon Oct 31 22:16:48 2011] Using EEF radius (= 2.36 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 22:16:48 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 31 22:16:48 2011] Initial guess for spatial extent in simple fitting = 2.36"
[Mon Oct 31 22:16:48 2011] source mask rpix=4.8, npix_max = 111, mask sum = 110, frac = 0.982
[Mon Oct 31 22:16:48 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.36"
[Mon Oct 31 22:16:49 2011] fullrun_ccd0_acisf10556_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 31 22:16:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10556_pi14-548_cl_pass0_src1.csv
[Mon Oct 31 22:16:49 2011] fullrun_ccd0_acisf10556_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 31 22:16:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10556_pi14-548_cl_pass0_src1.csv
[Mon Oct 31 22:16:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10556_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10556_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 22:16:51 2011] fullrun_ccd0_acisf10556_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 31 22:16:51 2011] fullrun_ccd0_acisf10556_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 31 22:16:51 2011] Fit fullrun_ccd0_acisf10556_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 31 22:17:47 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 27.312448 pixels away
[Mon Oct 31 22:17:47 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 22:17:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 22:17:47 2011] Assessing source extent using major
[Mon Oct 31 22:17:47 2011] Source does appear to be extended
[Mon Oct 31 22:17:47 2011] Computing asymmetry using major and minor axis, asym = 1.20
[Mon Oct 31 22:19:13 2011] Using EEF radius (= 2.36 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 22:19:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 31 22:19:13 2011] Initial guess for spatial extent in simple fitting = 2.36"
[Mon Oct 31 22:19:13 2011] source mask rpix=4.8, npix_max = 111, mask sum = 110, frac = 0.982
[Mon Oct 31 22:19:13 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.36"
[Mon Oct 31 22:19:14 2011] fullrun_ccd0_acisf10556_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 31 22:19:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10556_pi14-548_cl_pass1_src1.csv
[Mon Oct 31 22:19:14 2011] fullrun_ccd0_acisf10556_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 31 22:19:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10556_pi14-548_cl_pass1_src1.csv
[Mon Oct 31 22:19:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10556_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10556_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 22:19:18 2011] fullrun_ccd0_acisf10556_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 31 22:19:18 2011] fullrun_ccd0_acisf10556_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 31 22:19:18 2011] Fit fullrun_ccd0_acisf10556_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 31 22:20:05 2011] Spatial fit model total counts = 557.157000, observed total counts = 558.000000
[Mon Oct 31 22:20:05 2011] Offset between fit and detection position for source 1 = 2.200564 pixels
[Mon Oct 31 22:20:05 2011] 557.474000 total counts/ 219.733000 bgd. counts: snr = 22.784324
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.200564 pixels
  Position = (973.8, 1024.3) = 17 45 51.87 -28 53 12.0
  Extent = 2.7 (2.3-3.1)", rotation angle = 0
  Source counts = 337.7 +/- 23.6
  Background counts = 219.7
  Rate = 0.003 +/- 0.0002
[Mon Oct 31 22:20:05 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 22:20:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 22:20:05 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 22:20:05 2011] Source does appear to be extended
[Mon Oct 31 22:20:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 22:21:28 2011] Not overwriting source region fullrun_ccd0_acisf10556_pi14-548_pass1_cl_src1_src.reg
[Mon Oct 31 22:21:28 2011] Extracting stamp from image fullrun_ccd0_acisf10556_pi14-548_cl_sm2.00.img.gz, (850, 900) - (1098, 1148)
[Mon Oct 31 22:21:28 2011] Writing fullrun_ccd0_acisf10556_pi14-548_pass1_cl_src1.gif
[Mon Oct 31 22:21:33 2011] ../../acisf10556/products/events/fullrun_ccd0_acisf10556_pi14-548_pass1_cl_src1_src.evt and ../../acisf10556/products/events/fullrun_ccd0_acisf10556_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Oct 31 22:21:33 2011] Size of ../../acisf10556/products/events/fullrun_ccd0_acisf10556_pi14-548_pass1_cl_src1_src.evt.gz[events] = 545 counts
[Mon Oct 31 22:21:33 2011] Mean chipx,y = (953.82, 180.74)
[Mon Oct 31 22:21:33 2011] Mean tdetx,y = (3241.74, 4178.18)
[Mon Oct 31 22:21:33 2011] chipx,y range = (919.00-990.00, 144.00-216.00)
[Mon Oct 31 22:21:33 2011] Size of ../../acisf10556/products/events/fullrun_ccd0_acisf10556_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 2243 counts
[Mon Oct 31 22:21:33 2011] ../../acisf10556/products/images/fullrun_ccd0_acisf10556_pi14-548_pass1_cl_src1_src.img and ../../acisf10556/products/images/fullrun_ccd0_acisf10556_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Oct 31 22:21:33 2011] ../../acisf10556/products/spectra/fullrun_ccd0_acisf10556_pi14-548_pass1_cl_src1_src.pi and ../../acisf10556/products/spectra/fullrun_ccd0_acisf10556_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon Oct 31 22:21:36 2011] ../../acisf10556/products/lightcurves/fullrun_ccd0_acisf10556_pi14-548_pass1_cl_src1_src.lc and ../../acisf10556/products/lightcurves/fullrun_ccd0_acisf10556_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Oct 31 22:25:24 2011] Keeping rmf generated by specextract
[Mon Oct 31 22:25:24 2011] 157.952
[Mon Oct 31 22:44:05 2011] Updating aperture counts using extracted products
[Mon Oct 31 22:44:05 2011] Error reading totcts from fullrun_ccd0_acisf10556_pi14-548_pass1_cl_src1_src.pi.gz
[Mon Oct 31 22:44:06 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 31 22:44:06 2011] Using photon index=1.80, rate=0.003, arf fullrun_ccd0_acisf10556_pi14-548_pass1_cl_src1.arf
[Mon Oct 31 22:44:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 31 22:44:06 2011] Updating source flux to 5.7e-14
[Mon Oct 31 22:45:54 2011] Reading fit data from acisf10556/analysis//spectral/fullrun_ccd0_acisf10556_pi14-548_pass1_cl_src1_pl.csv
[Mon Oct 31 22:45:54 2011] Spectral fit parameter nH value = 1.03013e+23
[Mon Oct 31 22:45:54 2011] Spectral fit parameter PhoIndex value = -0.924809
[Mon Oct 31 22:45:54 2011] Failed to get F(0.3-8.0) from acisf10556/analysis//spectral/fullrun_ccd0_acisf10556_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Oct 31 22:45:54 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 31 22:45:54 2011] Using Nh = 1e+23, photon index=-0.92, rate=0.003, arf fullrun_ccd0_acisf10556_pi14-548_pass1_cl_src1.arf
[Mon Oct 31 22:45:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 31 22:45:54 2011] Updating source flux to 1.9e-13