[Mon Jan 23 06:37:10 2012] Detection parameters:
  Position = (432.4, 72.5) = 0 42 43.86 41 16 3.9
  Extent = 0.5" x 0.5", rotation angle = 130 degrees
  Source counts = 23.5 +/- 5.0
  Background counts = 1.5
  Rate = 0.006 +/- 0.001

[Mon Jan 23 06:37:10 2012] Off-axis axis estimate = 0.58'
[Mon Jan 23 07:32:14 2012] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 07:32:14 2012] Initial guess for spatial extent in simple fitting = 0.39"
[Mon Jan 23 07:32:14 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.351
[Mon Jan 23 07:32:14 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 0.39"
[Mon Jan 23 08:04:43 2012] fullrun_ccd3_acisf10553_pi14-548_cl_pass0_src15.ximg exists
[Mon Jan 23 08:04:43 2012] Warning: total counts is not > 0
[Mon Jan 23 08:04:43 2012] fullrun_ccd3_acisf10553_pi14-548_cl_pass0_src15_1.ximg exists
[Mon Jan 23 08:04:43 2012] Warning: total counts is not > 0
[Mon Jan 23 08:04:43 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10553_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10553_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 08:04:43 2012] fullrun_ccd3_acisf10553_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Mon Jan 23 08:04:43 2012] Warning: total counts is not > 0
[Mon Jan 23 08:04:43 2012] fullrun_ccd3_acisf10553_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Mon Jan 23 08:04:43 2012] Warning: total counts is not > 0
[Mon Jan 23 08:04:43 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10553_pi14-548_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10553_pi14-548_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 08:34:06 2012] Source 10 is offset by 3.541956 and 1.720303 pixels which is larger than
2 X fitted extent = 0.530394 x 0.530394, not incorporating fit results
[Mon Jan 23 08:34:06 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 08:34:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 08:34:06 2012] Assessing source extent using major
[Mon Jan 23 08:34:06 2012] Source does appear to be extended
[Mon Jan 23 08:34:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 09:11:03 2012] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 09:11:03 2012] Initial guess for spatial extent in simple fitting = 0.39"
[Mon Jan 23 09:11:03 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.351
[Mon Jan 23 09:11:03 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 0.39"
[Mon Jan 23 09:31:53 2012] fullrun_ccd3_acisf10553_pi14-548_cl_pass1_src7.ximg exists
[Mon Jan 23 09:31:53 2012] Warning: total counts is not > 0
[Mon Jan 23 09:31:53 2012] fullrun_ccd3_acisf10553_pi14-548_cl_pass1_src7_1.ximg exists
[Mon Jan 23 09:31:53 2012] Warning: total counts is not > 0
[Mon Jan 23 09:31:53 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10553_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10553_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 09:31:53 2012] fullrun_ccd3_acisf10553_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Mon Jan 23 09:31:53 2012] Warning: total counts is not > 0
[Mon Jan 23 09:31:53 2012] fullrun_ccd3_acisf10553_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Mon Jan 23 09:31:53 2012] Warning: total counts is not > 0
[Mon Jan 23 09:31:53 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10553_pi14-548_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10553_pi14-548_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 10:02:29 2012] Source 10 appears to have -ve number of counts, which is not physical
Fit may be corrupt, not incorporating results
[Mon Jan 23 10:02:29 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 10:02:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 10:02:29 2012] Assessing source extent using major
[Mon Jan 23 10:02:29 2012] Source does appear to be extended
[Mon Jan 23 10:02:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 10:13:54 2012] Writing source region out to fullrun_ccd3_acisf10553_pi14-548_pass1_cl_src10_src.reg
[Mon Jan 23 10:13:54 2012] Extracting stamp from image fullrun_ccd3_acisf10553_pi14-548_cl_sm2.00.img.gz, (410, 50) - (455, 95)
[Mon Jan 23 10:13:54 2012] Writing fullrun_ccd3_acisf10553_pi14-548_pass1_cl_src10.gif
[Mon Jan 23 10:15:43 2012] ../../acisf10553/products/events/fullrun_ccd3_acisf10553_pi14-548_pass1_cl_src10_src.evt.gz[events] does not have any counts, not extracting products.
[Mon Jan 23 10:18:27 2012] No arf file found
[Mon Jan 23 10:19:27 2012] Updating aperture counts using extracted products
[Mon Jan 23 10:19:27 2012] Error reading totcts from fullrun_ccd3_acisf10553_pi14-548_pass1_cl_src10_src.pi
[Mon Jan 23 10:19:27 2012] No arf file for this source, not re-computing flux
[Mon Jan 23 10:19:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jan 23 10:19:34 2012] acisf10553/analysis//spectral/fullrun_ccd3_acisf10553_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete