[Mon Jan 23 06:37:06 2012] Detection parameters:
  Position = (56.5, 698.2) = 0 42 41.63 41 14 37.1
  Extent = 0.5" x 0.5", rotation angle = 161 degrees
  Source counts = 13.7 +/- 3.7
  Background counts = 0.3
  Rate = 0.003 +/- 0.0009

[Mon Jan 23 06:37:06 2012] Off-axis axis estimate = 1.77'
[Mon Jan 23 06:49:56 2012] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 06:49:56 2012] Initial guess for spatial extent in simple fitting = 0.41"
[Mon Jan 23 06:49:56 2012] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.268
[Mon Jan 23 06:49:56 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 0.41"
[Mon Jan 23 07:14:59 2012] fullrun_ccd1_acisf10553_pi14-548_cl_pass0_src22.ximg exists
[Mon Jan 23 07:14:59 2012] Warning: total counts is not > 0
[Mon Jan 23 07:14:59 2012] fullrun_ccd1_acisf10553_pi14-548_cl_pass0_src22_1.ximg exists
[Mon Jan 23 07:14:59 2012] Warning: total counts is not > 0
[Mon Jan 23 07:14:59 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10553_pi14-548_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10553_pi14-548_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 07:14:59 2012] fullrun_ccd1_acisf10553_pi14-548_cl_pass0_tfrozen_src22.ximg exists
[Mon Jan 23 07:14:59 2012] Warning: total counts is not > 0
[Mon Jan 23 07:14:59 2012] fullrun_ccd1_acisf10553_pi14-548_cl_pass0_tfrozen_src22_1.ximg exists
[Mon Jan 23 07:14:59 2012] Warning: total counts is not > 0
[Mon Jan 23 07:14:59 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10553_pi14-548_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10553_pi14-548_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 08:34:00 2012] Source 15 appears to have -ve number of counts, which is not physical
Fit may be corrupt, not incorporating results
[Mon Jan 23 08:34:00 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 08:34:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 08:34:00 2012] Assessing source extent using major
[Mon Jan 23 08:34:00 2012] Source does appear to be extended
[Mon Jan 23 08:34:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 08:45:00 2012] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 08:45:00 2012] Initial guess for spatial extent in simple fitting = 0.41"
[Mon Jan 23 08:45:00 2012] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.268
[Mon Jan 23 08:45:00 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 0.41"
[Mon Jan 23 09:03:22 2012] fullrun_ccd1_acisf10553_pi14-548_cl_pass1_src16.ximg exists
[Mon Jan 23 09:03:22 2012] Warning: total counts is not > 0
[Mon Jan 23 09:03:22 2012] fullrun_ccd1_acisf10553_pi14-548_cl_pass1_src16_1.ximg exists
[Mon Jan 23 09:03:22 2012] Warning: total counts is not > 0
[Mon Jan 23 09:03:22 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10553_pi14-548_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10553_pi14-548_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 09:03:22 2012] fullrun_ccd1_acisf10553_pi14-548_cl_pass1_tfrozen_src16.ximg exists
[Mon Jan 23 09:03:22 2012] Warning: total counts is not > 0
[Mon Jan 23 09:03:22 2012] fullrun_ccd1_acisf10553_pi14-548_cl_pass1_tfrozen_src16_1.ximg exists
[Mon Jan 23 09:03:22 2012] Warning: total counts is not > 0
[Mon Jan 23 09:03:22 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10553_pi14-548_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10553_pi14-548_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 10:02:26 2012] Source 15 appears to have -ve number of counts, which is not physical
Fit may be corrupt, not incorporating results
[Mon Jan 23 10:02:26 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 10:02:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 10:02:26 2012] Assessing source extent using major
[Mon Jan 23 10:02:26 2012] Source does appear to be extended
[Mon Jan 23 10:02:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 10:03:47 2012] Writing source region out to fullrun_ccd1_acisf10553_pi14-548_pass1_cl_src15_src.reg
[Mon Jan 23 10:03:47 2012] Extracting stamp from image fullrun_ccd1_acisf10553_pi14-548_cl_sm2.00.img.gz, (34, 676) - (79, 721)
[Mon Jan 23 10:03:47 2012] Writing fullrun_ccd1_acisf10553_pi14-548_pass1_cl_src15.gif
[Mon Jan 23 10:08:13 2012] ../../acisf10553/products/events/fullrun_ccd1_acisf10553_pi14-548_pass1_cl_src15_src.evt.gz[events] does not have any counts, not extracting products.
[Mon Jan 23 10:08:53 2012] No arf file found
[Mon Jan 23 10:19:26 2012] Updating aperture counts using extracted products
[Mon Jan 23 10:19:26 2012] Error reading totcts from fullrun_ccd1_acisf10553_pi14-548_pass1_cl_src15_src.pi
[Mon Jan 23 10:19:26 2012] No arf file for this source, not re-computing flux
[Mon Jan 23 10:19:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jan 23 10:19:32 2012] acisf10553/analysis//spectral/fullrun_ccd1_acisf10553_pi14-548_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete