[Mon Jan 23 06:37:04 2012] Detection parameters:
  Position = (180.8, 917.0) = 0 43 8.66 41 12 48.7
  Extent = 0.7" x 0.7", rotation angle = 105 degrees
  Source counts = 20.7 +/- 4.6
  Background counts = 0.3
  Rate = 0.005 +/- 0.001

[Mon Jan 23 06:37:04 2012] Off-axis axis estimate = 5.23'
[Mon Jan 23 06:38:43 2012] Using EEF radius (= 1.27 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 06:38:43 2012] Initial guess for spatial extent in simple fitting = 1.27"
[Mon Jan 23 06:38:43 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.943
[Mon Jan 23 06:38:43 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 1.27"
[Mon Jan 23 06:49:56 2012] fullrun_ccd0_acisf10553_pi14-548_cl_pass0_src7.ximg exists
[Mon Jan 23 06:49:56 2012] Warning: total counts is not > 0
[Mon Jan 23 06:49:56 2012] fullrun_ccd0_acisf10553_pi14-548_cl_pass0_src7_1.ximg exists
[Mon Jan 23 06:49:56 2012] Warning: total counts is not > 0
[Mon Jan 23 06:49:56 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10553_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10553_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 06:49:56 2012] fullrun_ccd0_acisf10553_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Mon Jan 23 06:49:56 2012] Warning: total counts is not > 0
[Mon Jan 23 06:49:56 2012] fullrun_ccd0_acisf10553_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Mon Jan 23 06:49:56 2012] Warning: total counts is not > 0
[Mon Jan 23 06:49:56 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10553_pi14-548_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10553_pi14-548_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 08:33:57 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 11.495553 pixels away
[Mon Jan 23 08:33:57 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 08:33:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 08:33:57 2012] Assessing source extent using major
[Mon Jan 23 08:33:57 2012] Source does appear to be extended
[Mon Jan 23 08:33:57 2012] Computing asymmetry using major and minor axis, asym = 1.09
[Mon Jan 23 08:34:23 2012] Using EEF radius (= 1.27 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 08:34:23 2012] Initial guess for spatial extent in simple fitting = 1.27"
[Mon Jan 23 08:34:23 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.943
[Mon Jan 23 08:34:23 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 1.27"
[Mon Jan 23 08:45:00 2012] fullrun_ccd0_acisf10553_pi14-548_cl_pass1_src6.ximg exists
[Mon Jan 23 08:45:00 2012] Warning: total counts is not > 0
[Mon Jan 23 08:45:00 2012] fullrun_ccd0_acisf10553_pi14-548_cl_pass1_src6_1.ximg exists
[Mon Jan 23 08:45:00 2012] Warning: total counts is not > 0
[Mon Jan 23 08:45:00 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10553_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10553_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 08:45:00 2012] fullrun_ccd0_acisf10553_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Mon Jan 23 08:45:00 2012] Warning: total counts is not > 0
[Mon Jan 23 08:45:00 2012] fullrun_ccd0_acisf10553_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Mon Jan 23 08:45:00 2012] Warning: total counts is not > 0
[Mon Jan 23 08:45:00 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10553_pi14-548_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10553_pi14-548_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 10:02:23 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 15.188626 pixels away
[Mon Jan 23 10:02:23 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 10:02:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 10:02:23 2012] Assessing source extent using major
[Mon Jan 23 10:02:23 2012] Source does appear to be extended
[Mon Jan 23 10:02:23 2012] Computing asymmetry using major and minor axis, asym = 1.09
[Mon Jan 23 10:02:46 2012] Writing source region out to fullrun_ccd0_acisf10553_pi14-548_pass1_cl_src13_src.reg
[Mon Jan 23 10:02:46 2012] Extracting stamp from image fullrun_ccd0_acisf10553_pi14-548_cl_sm2.00.img.gz, (147, 884) - (214, 950)
[Mon Jan 23 10:02:46 2012] Writing fullrun_ccd0_acisf10553_pi14-548_pass1_cl_src13.gif
[Mon Jan 23 10:03:32 2012] ../../acisf10553/products/events/fullrun_ccd0_acisf10553_pi14-548_pass1_cl_src13_src.evt.gz[events] does not have any counts, not extracting products.
[Mon Jan 23 10:03:46 2012] No arf file found
[Mon Jan 23 10:19:26 2012] Updating aperture counts using extracted products
[Mon Jan 23 10:19:26 2012] Error reading totcts from fullrun_ccd0_acisf10553_pi14-548_pass1_cl_src13_src.pi
[Mon Jan 23 10:19:26 2012] No arf file for this source, not re-computing flux
[Mon Jan 23 10:19:30 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jan 23 10:19:31 2012] acisf10553/analysis//spectral/fullrun_ccd0_acisf10553_pi14-548_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete