[Wed Feb 22 05:13:22 2012] Detection parameters:
  Position = (793.4, 118.1) = 0 42 43.19 41 16 40.6
  Extent = 0.5" x 0.5", rotation angle = 51 degrees
  Source counts = 10.1 +/- 3.3
  Background counts = 0.9
  Rate = 0.003 +/- 0.0008

[Wed Feb 22 05:13:23 2012] Off-axis axis estimate = 1.03'
[Wed Feb 22 06:10:18 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 06:10:18 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Wed Feb 22 06:10:18 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.926
[Wed Feb 22 06:10:18 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 0.38"
[Wed Feb 22 06:45:50 2012] fullrun_ccd3_acisf10552_pi14-548_cl_pass0_src28.ximg exists
[Wed Feb 22 06:45:50 2012] Warning: total counts is not > 0
[Wed Feb 22 06:45:50 2012] fullrun_ccd3_acisf10552_pi14-548_cl_pass0_src28_1.ximg exists
[Wed Feb 22 06:45:50 2012] Warning: total counts is not > 0
[Wed Feb 22 06:45:50 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10552_pi14-548_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10552_pi14-548_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 06:45:50 2012] fullrun_ccd3_acisf10552_pi14-548_cl_pass0_tfrozen_src28.ximg exists
[Wed Feb 22 06:45:50 2012] Warning: total counts is not > 0
[Wed Feb 22 06:45:50 2012] fullrun_ccd3_acisf10552_pi14-548_cl_pass0_tfrozen_src28_1.ximg exists
[Wed Feb 22 06:45:50 2012] Warning: total counts is not > 0
[Wed Feb 22 06:45:50 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10552_pi14-548_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10552_pi14-548_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 06:59:02 2012] Source 26 is offset by -2.439113 and 1.432572 pixels which is larger than
2 X fitted extent = 0.680866 x 0.680866, not incorporating fit results
[Wed Feb 22 06:59:02 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 06:59:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 06:59:02 2012] Assessing source extent using major
[Wed Feb 22 06:59:02 2012] Source does appear to be extended
[Wed Feb 22 06:59:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 07:46:41 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 07:46:41 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Wed Feb 22 07:46:41 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.926
[Wed Feb 22 07:46:41 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 0.38"
[Wed Feb 22 08:10:48 2012] fullrun_ccd3_acisf10552_pi14-548_cl_pass1_src18.ximg exists
[Wed Feb 22 08:10:48 2012] Warning: total counts is not > 0
[Wed Feb 22 08:10:48 2012] fullrun_ccd3_acisf10552_pi14-548_cl_pass1_src18_1.ximg exists
[Wed Feb 22 08:10:48 2012] Warning: total counts is not > 0
[Wed Feb 22 08:10:48 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10552_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10552_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 08:10:48 2012] fullrun_ccd3_acisf10552_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Wed Feb 22 08:10:48 2012] Warning: total counts is not > 0
[Wed Feb 22 08:10:48 2012] fullrun_ccd3_acisf10552_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Wed Feb 22 08:10:48 2012] Warning: total counts is not > 0
[Wed Feb 22 08:10:48 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10552_pi14-548_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10552_pi14-548_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 08:24:17 2012] Source 26 appears to have -ve number of counts, which is not physical
Fit may be corrupt, not incorporating results
[Wed Feb 22 08:24:17 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 08:24:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 08:24:17 2012] Assessing source extent using major
[Wed Feb 22 08:24:17 2012] Source does appear to be extended
[Wed Feb 22 08:24:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 08:35:53 2012] Writing source region out to fullrun_ccd3_acisf10552_pi14-548_pass1_cl_src26_src.reg
[Wed Feb 22 08:35:53 2012] Extracting stamp from image fullrun_ccd3_acisf10552_pi14-548_cl_sm2.00.img.gz, (771, 96) - (816, 141)
[Wed Feb 22 08:35:53 2012] Writing fullrun_ccd3_acisf10552_pi14-548_pass1_cl_src26.gif
[Wed Feb 22 08:40:43 2012] ../../acisf10552/products/events/fullrun_ccd3_acisf10552_pi14-548_pass1_cl_src26_src.evt.gz[events] does not have any counts, not extracting products.
[Wed Feb 22 08:42:15 2012] No arf file found
[Wed Feb 22 08:43:03 2012] Updating aperture counts using extracted products
[Wed Feb 22 08:43:03 2012] Error reading totcts from fullrun_ccd3_acisf10552_pi14-548_pass1_cl_src26_src.pi
[Wed Feb 22 08:43:03 2012] No arf file for this source, not re-computing flux
[Wed Feb 22 08:43:09 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Feb 22 08:43:10 2012] acisf10552/analysis//spectral/fullrun_ccd3_acisf10552_pi14-548_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete