[Wed Feb 22 05:13:22 2012] Detection parameters:
  Position = (779.0, 61.8) = 0 42 43.81 41 16 12.9
  Extent = 0.5" x 0.5", rotation angle = 42 degrees
  Source counts = 22.1 +/- 4.9
  Background counts = 1.9
  Rate = 0.006 +/- 0.001

[Wed Feb 22 05:13:23 2012] Off-axis axis estimate = 0.61'
[Wed Feb 22 06:10:18 2012] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 06:10:18 2012] Initial guess for spatial extent in simple fitting = 0.39"
[Wed Feb 22 06:10:18 2012] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.603
[Wed Feb 22 06:10:18 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 0.39"
[Wed Feb 22 06:45:50 2012] fullrun_ccd3_acisf10552_pi14-548_cl_pass0_src20.ximg exists
[Wed Feb 22 06:45:50 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf10552_pi14-548_cl_pass0_src20.csv
[Wed Feb 22 06:45:50 2012] fullrun_ccd3_acisf10552_pi14-548_cl_pass0_src20_1.ximg exists
[Wed Feb 22 06:45:50 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf10552_pi14-548_cl_pass0_src20.csv
[Wed Feb 22 06:45:50 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10552_pi14-548_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10552_pi14-548_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 06:45:50 2012] fullrun_ccd3_acisf10552_pi14-548_cl_pass0_tfrozen_src20.ximg exists
[Wed Feb 22 06:45:50 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf10552_pi14-548_cl_pass0_tfrozen_src20.csv
[Wed Feb 22 06:45:50 2012] fullrun_ccd3_acisf10552_pi14-548_cl_pass0_tfrozen_src20_1.ximg exists
[Wed Feb 22 06:45:50 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf10552_pi14-548_cl_pass0_tfrozen_src20.csv
[Wed Feb 22 06:45:50 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10552_pi14-548_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10552_pi14-548_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 06:59:02 2012] Spatial fit model total counts = 0.290000, observed total counts = 1.000000
[Wed Feb 22 06:59:02 2012] Offset between fit and detection position for source 21 = 3.776665 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 3.776665 pixels
  Position = (776.5, 64.7) = 0 42 43.94 41 16 14.0
  Extent = 0.8 (0.1-1.5)", rotation angle = 0
  Source counts = 0.0 +/- 0.0
  Background counts = 0.0
  Rate = 1e-07 +/- 3e-05
[Wed Feb 22 06:59:02 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 06:59:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 06:59:02 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 06:59:02 2012] Source does appear to be extended
[Wed Feb 22 06:59:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 07:46:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb 22 07:46:41 2012] Initial guess for spatial extent in simple fitting = 0.77"
[Wed Feb 22 07:46:41 2012] Spatial fitting skipped for pass 1: source                                 has 0.0 net counts, is at off-axis angle 0.6'
[Wed Feb 22 08:24:17 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 08:24:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 08:24:17 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 08:24:17 2012] Source does appear to be extended
[Wed Feb 22 08:24:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 08:35:53 2012] Writing source region out to fullrun_ccd3_acisf10552_pi14-548_pass1_cl_src21_src.reg
[Wed Feb 22 08:35:53 2012] Extracting stamp from image fullrun_ccd3_acisf10552_pi14-548_cl_sm2.00.img.gz, (741, 29) - (812, 100)
[Wed Feb 22 08:35:53 2012] Writing fullrun_ccd3_acisf10552_pi14-548_pass1_cl_src21.gif
[Wed Feb 22 08:39:01 2012] ../../acisf10552/products/events/fullrun_ccd3_acisf10552_pi14-548_pass1_cl_src21_src.evt.gz[events] does not have any counts, not extracting products.
[Wed Feb 22 08:42:15 2012] No arf file found
[Wed Feb 22 08:43:03 2012] Updating aperture counts using extracted products
[Wed Feb 22 08:43:03 2012] Error reading totcts from fullrun_ccd3_acisf10552_pi14-548_pass1_cl_src21_src.pi
[Wed Feb 22 08:43:03 2012] No arf file for this source, not re-computing flux
[Wed Feb 22 08:43:09 2012] Source 21 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Feb 22 08:43:10 2012] acisf10552/analysis//spectral/fullrun_ccd3_acisf10552_pi14-548_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete