[Wed Feb 22 05:13:22 2012] Detection parameters:
  Position = (766.4, 52.2) = 0 42 44.36 41 16 8.1
  Extent = 0.5" x 0.5", rotation angle = 63 degrees
  Source counts = 121.1 +/- 11.2
  Background counts = 4.9
  Rate = 0.03 +/- 0.003

[Wed Feb 22 05:13:23 2012] Off-axis axis estimate = 0.48'
[Wed Feb 22 06:10:18 2012] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 06:10:18 2012] Initial guess for spatial extent in simple fitting = 0.39"
[Wed Feb 22 06:10:18 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.888
[Wed Feb 22 06:10:18 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 0.39"
[Wed Feb 22 06:45:50 2012] fullrun_ccd3_acisf10552_pi14-548_cl_pass0_src5.ximg exists
[Wed Feb 22 06:45:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10552_pi14-548_cl_pass0_src5.csv
[Wed Feb 22 06:45:50 2012] fullrun_ccd3_acisf10552_pi14-548_cl_pass0_src5_1.ximg exists
[Wed Feb 22 06:45:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10552_pi14-548_cl_pass0_src5.csv
[Wed Feb 22 06:45:50 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10552_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10552_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 06:45:50 2012] fullrun_ccd3_acisf10552_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Wed Feb 22 06:45:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10552_pi14-548_cl_pass0_tfrozen_src5.csv
[Wed Feb 22 06:45:50 2012] fullrun_ccd3_acisf10552_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Feb 22 06:45:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10552_pi14-548_cl_pass0_tfrozen_src5.csv
[Wed Feb 22 06:45:50 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10552_pi14-548_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10552_pi14-548_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 06:59:02 2012] Spatial fit model total counts = 4.586720, observed total counts = 5.000000
[Wed Feb 22 06:59:02 2012] Offset between fit and detection position for source 16 = 1.271529 pixels
[Wed Feb 22 06:59:02 2012] 4.431790 total counts/ 1.962760 bgd. counts: snr = 1.762352
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 1.271529 pixels
  Position = (765.8, 51.1) = 0 42 44.41 41 16 7.4
  Extent = 0.4 (0.2-0.7)", rotation angle = 0
  Source counts = 2.5 +/- 2.1
  Background counts = 2.0
  Rate = 0.02 +/- 0.01
  Deleting source due to low Poisson probability