[Wed Feb 22 05:13:16 2012] Detection parameters:
  Position = (605.3, 143.4) = 0 42 15.11 41 12 34.0
  Extent = 1.7" x 1.2", rotation angle = 123 degrees
  Source counts = 36.5 +/- 6.2
  Background counts = 1.5
  Rate = 0.009 +/- 0.002

[Wed Feb 22 05:13:17 2012] Off-axis axis estimate = 6.74'
[Wed Feb 22 05:27:49 2012] Using EEF radius (= 2.03 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 05:27:49 2012] Initial guess for spatial extent in simple fitting = 2.03"
[Wed Feb 22 05:27:49 2012] source mask rpix=4.1, npix_max = 85, mask sum = 69, frac = 0.808
[Wed Feb 22 05:27:49 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 2.03"
[Wed Feb 22 05:53:13 2012] fullrun_ccd1_acisf10552_pi14-548_cl_pass0_src16.ximg exists
[Wed Feb 22 05:53:13 2012] Warning: total counts is not > 0
[Wed Feb 22 05:53:13 2012] fullrun_ccd1_acisf10552_pi14-548_cl_pass0_src16_1.ximg exists
[Wed Feb 22 05:53:13 2012] Warning: total counts is not > 0
[Wed Feb 22 05:53:13 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10552_pi14-548_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10552_pi14-548_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 05:53:14 2012] fullrun_ccd1_acisf10552_pi14-548_cl_pass0_tfrozen_src16.ximg exists
[Wed Feb 22 05:53:14 2012] Warning: total counts is not > 0
[Wed Feb 22 05:53:14 2012] fullrun_ccd1_acisf10552_pi14-548_cl_pass0_tfrozen_src16_1.ximg exists
[Wed Feb 22 05:53:14 2012] Warning: total counts is not > 0
[Wed Feb 22 05:53:14 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10552_pi14-548_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10552_pi14-548_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 06:58:57 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 23.555849 pixels away
[Wed Feb 22 06:58:57 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 06:58:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 06:58:57 2012] Assessing source extent using major
[Wed Feb 22 06:58:57 2012] Source does appear to be extended
[Wed Feb 22 06:58:57 2012] Computing asymmetry using major and minor axis, asym = 1.49
[Wed Feb 22 07:13:21 2012] Using EEF radius (= 2.03 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 07:13:21 2012] Initial guess for spatial extent in simple fitting = 2.03"
[Wed Feb 22 07:13:21 2012] source mask rpix=4.1, npix_max = 85, mask sum = 69, frac = 0.808
[Wed Feb 22 07:13:21 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 2.03"
[Wed Feb 22 07:30:12 2012] fullrun_ccd1_acisf10552_pi14-548_cl_pass1_src13.ximg exists
[Wed Feb 22 07:30:12 2012] Warning: total counts is not > 0
[Wed Feb 22 07:30:12 2012] fullrun_ccd1_acisf10552_pi14-548_cl_pass1_src13_1.ximg exists
[Wed Feb 22 07:30:12 2012] Warning: total counts is not > 0
[Wed Feb 22 07:30:12 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10552_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10552_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 07:30:12 2012] fullrun_ccd1_acisf10552_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Wed Feb 22 07:30:12 2012] Warning: total counts is not > 0
[Wed Feb 22 07:30:12 2012] fullrun_ccd1_acisf10552_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Wed Feb 22 07:30:12 2012] Warning: total counts is not > 0
[Wed Feb 22 07:30:12 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10552_pi14-548_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10552_pi14-548_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 08:24:13 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 23.555849 pixels away
[Wed Feb 22 08:24:13 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 08:24:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 08:24:13 2012] Assessing source extent using major
[Wed Feb 22 08:24:13 2012] Source does appear to be extended
[Wed Feb 22 08:24:13 2012] Computing asymmetry using major and minor axis, asym = 1.49
[Wed Feb 22 08:26:56 2012] Writing source region out to fullrun_ccd1_acisf10552_pi14-548_pass1_cl_src16_src.reg
[Wed Feb 22 08:26:56 2012] Extracting stamp from image fullrun_ccd1_acisf10552_pi14-548_cl_sm2.00.img.gz, (525, 63) - (685, 223)
[Wed Feb 22 08:26:56 2012] Writing fullrun_ccd1_acisf10552_pi14-548_pass1_cl_src16.gif
[Wed Feb 22 08:32:23 2012] ../../acisf10552/products/events/fullrun_ccd1_acisf10552_pi14-548_pass1_cl_src16_src.evt.gz[events] does not have any counts, not extracting products.
[Wed Feb 22 08:32:58 2012] No arf file found
[Wed Feb 22 08:43:02 2012] Updating aperture counts using extracted products
[Wed Feb 22 08:43:02 2012] Error reading totcts from fullrun_ccd1_acisf10552_pi14-548_pass1_cl_src16_src.pi
[Wed Feb 22 08:43:02 2012] No arf file for this source, not re-computing flux
[Wed Feb 22 08:43:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Feb 22 08:43:08 2012] acisf10552/analysis//spectral/fullrun_ccd1_acisf10552_pi14-548_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete