[Wed Feb 22 05:13:14 2012] Detection parameters:
  Position = (422.1, 1238.8) = 0 42 39.54 41 14 28.5
  Extent = 0.5" x 0.5", rotation angle = 107 degrees
  Source counts = 42.6 +/- 6.6
  Background counts = 0.4
  Rate = 0.01 +/- 0.002

[Wed Feb 22 05:13:14 2012] Off-axis axis estimate = 1.89'
[Wed Feb 22 05:14:59 2012] Using EEF radius (= 0.42 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 05:14:59 2012] Initial guess for spatial extent in simple fitting = 0.42"
[Wed Feb 22 05:14:59 2012] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.820
[Wed Feb 22 05:14:59 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 0.42"
[Wed Feb 22 05:27:48 2012] fullrun_ccd0_acisf10552_pi14-548_cl_pass0_src9.ximg exists
[Wed Feb 22 05:27:48 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf10552_pi14-548_cl_pass0_src9.csv
[Wed Feb 22 05:27:48 2012] fullrun_ccd0_acisf10552_pi14-548_cl_pass0_src9_1.ximg exists
[Wed Feb 22 05:27:48 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf10552_pi14-548_cl_pass0_src9.csv
[Wed Feb 22 05:27:48 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10552_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10552_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 05:27:49 2012] fullrun_ccd0_acisf10552_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Wed Feb 22 05:27:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10552_pi14-548_cl_pass0_tfrozen_src9.csv
[Wed Feb 22 05:27:49 2012] fullrun_ccd0_acisf10552_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Feb 22 05:27:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10552_pi14-548_cl_pass0_tfrozen_src9.csv
[Wed Feb 22 05:27:49 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10552_pi14-548_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10552_pi14-548_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 06:58:54 2012] Source 11 is offset by -0.894666 and -1.221012 pixels which is larger than
2 X fitted extent = 0.443813 x 0.443813, not incorporating fit results
[Wed Feb 22 06:58:54 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 06:58:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 06:58:54 2012] Assessing source extent using major
[Wed Feb 22 06:58:54 2012] Source does appear to be extended
[Wed Feb 22 06:58:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 06:59:21 2012] Using EEF radius (= 0.42 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 06:59:21 2012] Initial guess for spatial extent in simple fitting = 0.42"
[Wed Feb 22 06:59:21 2012] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.820
[Wed Feb 22 06:59:21 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 0.42"
[Wed Feb 22 07:13:21 2012] fullrun_ccd0_acisf10552_pi14-548_cl_pass1_src6.ximg exists
[Wed Feb 22 07:13:21 2012] fullrun_ccd0_acisf10552_pi14-548_cl_pass1_src6_1.ximg exists
[Wed Feb 22 07:13:21 2012] Fit fullrun_ccd0_acisf10552_pi14-548_cl_pass1_src6 appears to have run properly
[Wed Feb 22 07:13:21 2012] fullrun_ccd0_acisf10552_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Wed Feb 22 07:13:21 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf10552_pi14-548_cl_pass1_tfrozen_src6.csv
[Wed Feb 22 07:13:21 2012] fullrun_ccd0_acisf10552_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Feb 22 07:13:21 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf10552_pi14-548_cl_pass1_tfrozen_src6.csv
[Wed Feb 22 07:13:21 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10552_pi14-548_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10552_pi14-548_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 08:24:11 2012] Spatial fit model total counts = 0.727244, observed total counts = 2.000000
[Wed Feb 22 08:24:11 2012] Offset between fit and detection position for source 11 = 4.017047 pixels
[Wed Feb 22 08:24:11 2012] 0.784314 total counts/ 0.000147 bgd. counts: snr = 64.738248
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 4.017047 pixels
  Position = (425.4, 1241.1) = 0 42 39.41 41 14 29.4
  Extent = 1.5 (0.9-3.0)", rotation angle = 0
  Source counts = 0.8 +/- 0.9
  Background counts = 0.0
  Rate = 0.005 +/- 0.006
[Wed Feb 22 08:24:11 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 08:24:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 08:24:11 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 08:24:11 2012] Source does appear to be extended
[Wed Feb 22 08:24:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 08:24:37 2012] Writing source region out to fullrun_ccd0_acisf10552_pi14-548_pass1_cl_src11_src.reg
[Wed Feb 22 08:24:37 2012] Extracting stamp from image fullrun_ccd0_acisf10552_pi14-548_cl_sm2.00.img.gz, (357, 1172) - (494, 1273)
[Wed Feb 22 08:24:37 2012] Writing fullrun_ccd0_acisf10552_pi14-548_pass1_cl_src11.gif
[Wed Feb 22 08:25:56 2012] Size of ../../acisf10552/products/events/fullrun_ccd0_acisf10552_pi14-548_pass1_cl_src11_src.evt.gz[events] = 2 counts
[Wed Feb 22 08:25:56 2012] Mean chipx,y = (875.00, 1004.00)
[Wed Feb 22 08:25:56 2012] Mean tdetx,y = (4065.00, 4257.00)
[Wed Feb 22 08:25:56 2012] chipx,y range = (872.00-878.00, 991.00-1017.00)
[Wed Feb 22 08:25:56 2012] Size of ../../acisf10552/products/events/fullrun_ccd0_acisf10552_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 1 counts
[Wed Feb 22 08:25:58 2012] Not generating rmf since there are only 0 counts
[Wed Feb 22 08:25:58 2012] arf not found, will run specextract
[Wed Feb 22 08:26:31 2012] ../../acisf10552/products/spectra/fullrun_ccd0_acisf10552_pi14-548_pass1_cl_src11.warf not found
[Wed Feb 22 08:26:31 2012] ../../acisf10552/products/spectra/fullrun_ccd0_acisf10552_pi14-548_pass1_cl_src11.wrmf not found
[Wed Feb 22 08:26:31 2012] Removal of ../../acisf10552/products/spectra/fullrun_ccd0_acisf10552_pi14-548_pass1_cl_src11.soff failed
[Wed Feb 22 08:26:56 2012] Spectrum 11 has only 1 counts, deleting rmf
[Wed Feb 22 08:26:56 2012] 205.336
[Wed Feb 22 08:43:02 2012] Updating aperture counts using extracted products
[Wed Feb 22 08:43:02 2012] Error reading totcts from fullrun_ccd0_acisf10552_pi14-548_pass1_cl_src11_src.pi.gz
[Wed Feb 22 08:43:02 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 22 08:43:02 2012] Using photon index=1.80, rate=0.00535, arf fullrun_ccd0_acisf10552_pi14-548_pass1_cl_src11.arf
[Wed Feb 22 08:43:02 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 22 08:43:02 2012] Updating source flux to 5.9e-14
[Wed Feb 22 08:43:06 2012] Flag b found in src. 11 procflags, skipping spectral fitting
[Wed Feb 22 08:43:06 2012] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Feb 22 08:43:07 2012] acisf10552/analysis//spectral/fullrun_ccd0_acisf10552_pi14-548_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete