[Wed Feb 22 05:13:14 2012] Detection parameters:
  Position = (489.2, 1161.2) = 0 42 36.61 41 13 50.3
  Extent = 0.5" x 0.5", rotation angle = 166 degrees
  Source counts = 11.9 +/- 3.5
  Background counts = 0.1
  Rate = 0.003 +/- 0.0009

[Wed Feb 22 05:13:14 2012] Off-axis axis estimate = 2.73'
[Wed Feb 22 05:14:59 2012] Using EEF radius (= 0.53 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 05:14:59 2012] Initial guess for spatial extent in simple fitting = 0.53"
[Wed Feb 22 05:14:59 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.906
[Wed Feb 22 05:14:59 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 0.53"
[Wed Feb 22 05:27:48 2012] fullrun_ccd0_acisf10552_pi14-548_cl_pass0_src8.ximg exists
[Wed Feb 22 05:27:48 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf10552_pi14-548_cl_pass0_src8.csv
[Wed Feb 22 05:27:48 2012] fullrun_ccd0_acisf10552_pi14-548_cl_pass0_src8_1.ximg exists
[Wed Feb 22 05:27:48 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf10552_pi14-548_cl_pass0_src8.csv
[Wed Feb 22 05:27:48 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10552_pi14-548_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10552_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 05:27:49 2012] fullrun_ccd0_acisf10552_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Wed Feb 22 05:27:49 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf10552_pi14-548_cl_pass0_tfrozen_src8.csv
[Wed Feb 22 05:27:49 2012] fullrun_ccd0_acisf10552_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Wed Feb 22 05:27:49 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf10552_pi14-548_cl_pass0_tfrozen_src8.csv
[Wed Feb 22 05:27:49 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10552_pi14-548_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10552_pi14-548_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 06:58:54 2012] Source 10 is offset by 4.553293 and 2.416524 pixels which is larger than
2 X fitted extent = 1.413854 x 1.413854, not incorporating fit results
[Wed Feb 22 06:58:54 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 06:58:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 06:58:54 2012] Assessing source extent using major
[Wed Feb 22 06:58:54 2012] Source does appear to be extended
[Wed Feb 22 06:58:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 06:59:21 2012] Using EEF radius (= 0.53 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 06:59:21 2012] Initial guess for spatial extent in simple fitting = 0.53"
[Wed Feb 22 06:59:21 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.906
[Wed Feb 22 06:59:21 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 0.53"
[Wed Feb 22 07:13:21 2012] fullrun_ccd0_acisf10552_pi14-548_cl_pass1_src5.ximg exists
[Wed Feb 22 07:13:21 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf10552_pi14-548_cl_pass1_src5.csv
[Wed Feb 22 07:13:21 2012] fullrun_ccd0_acisf10552_pi14-548_cl_pass1_src5_1.ximg exists
[Wed Feb 22 07:13:21 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf10552_pi14-548_cl_pass1_src5.csv
[Wed Feb 22 07:13:21 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10552_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10552_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 07:13:21 2012] fullrun_ccd0_acisf10552_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Wed Feb 22 07:13:21 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf10552_pi14-548_cl_pass1_tfrozen_src5.csv
[Wed Feb 22 07:13:21 2012] fullrun_ccd0_acisf10552_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Feb 22 07:13:21 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf10552_pi14-548_cl_pass1_tfrozen_src5.csv
[Wed Feb 22 07:13:21 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10552_pi14-548_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10552_pi14-548_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 08:24:11 2012] Source 10 is offset by 4.071809 and 3.470041 pixels which is larger than
2 X fitted extent = 1.199362 x 1.199362, not incorporating fit results
[Wed Feb 22 08:24:11 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 08:24:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 08:24:11 2012] Assessing source extent using major
[Wed Feb 22 08:24:11 2012] Source does appear to be extended
[Wed Feb 22 08:24:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 08:24:37 2012] Writing source region out to fullrun_ccd0_acisf10552_pi14-548_pass1_cl_src10_src.reg
[Wed Feb 22 08:24:37 2012] Extracting stamp from image fullrun_ccd0_acisf10552_pi14-548_cl_sm2.00.img.gz, (467, 1139) - (512, 1184)
[Wed Feb 22 08:24:37 2012] Writing fullrun_ccd0_acisf10552_pi14-548_pass1_cl_src10.gif
[Wed Feb 22 08:25:52 2012] ../../acisf10552/products/events/fullrun_ccd0_acisf10552_pi14-548_pass1_cl_src10_src.evt.gz[events] does not have any counts, not extracting products.
[Wed Feb 22 08:26:56 2012] No arf file found
[Wed Feb 22 08:43:02 2012] Updating aperture counts using extracted products
[Wed Feb 22 08:43:02 2012] Error reading totcts from fullrun_ccd0_acisf10552_pi14-548_pass1_cl_src10_src.pi
[Wed Feb 22 08:43:02 2012] No arf file for this source, not re-computing flux
[Wed Feb 22 08:43:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Feb 22 08:43:07 2012] acisf10552/analysis//spectral/fullrun_ccd0_acisf10552_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete