[Mon Jan 23 12:53:06 2012] Detection parameters:
  Position = (824.9, 53.5) = 0 42 45.59 41 16 8.5
  Extent = 0.5" x 0.5", rotation angle = 25 degrees
  Source counts = 18.5 +/- 4.5
  Background counts = 1.5
  Rate = 0.005 +/- 0.001

[Mon Jan 23 12:53:07 2012] Off-axis axis estimate = 0.38'
[Mon Jan 23 13:14:38 2012] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 13:14:38 2012] Initial guess for spatial extent in simple fitting = 0.40"
[Mon Jan 23 13:14:38 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.873
[Mon Jan 23 13:14:38 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 0.40"
[Mon Jan 23 13:42:19 2012] fullrun_ccd3_acisf10551_pi14-548_cl_pass0_src22.ximg exists
[Mon Jan 23 13:42:19 2012] Warning: total counts is not > 0
[Mon Jan 23 13:42:19 2012] fullrun_ccd3_acisf10551_pi14-548_cl_pass0_src22_1.ximg exists
[Mon Jan 23 13:42:19 2012] Warning: total counts is not > 0
[Mon Jan 23 13:42:19 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10551_pi14-548_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10551_pi14-548_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 13:42:19 2012] fullrun_ccd3_acisf10551_pi14-548_cl_pass0_tfrozen_src22.ximg exists
[Mon Jan 23 13:42:19 2012] Warning: total counts is not > 0
[Mon Jan 23 13:42:19 2012] fullrun_ccd3_acisf10551_pi14-548_cl_pass0_tfrozen_src22_1.ximg exists
[Mon Jan 23 13:42:19 2012] Warning: total counts is not > 0
[Mon Jan 23 13:42:19 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10551_pi14-548_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10551_pi14-548_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 14:17:09 2012] Source 17 appears to have -ve number of counts, which is not physical
Fit may be corrupt, not incorporating results
[Mon Jan 23 14:17:09 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 14:17:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 14:17:09 2012] Assessing source extent using major
[Mon Jan 23 14:17:09 2012] Source does appear to be extended
[Mon Jan 23 14:17:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 14:29:21 2012] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 14:29:21 2012] Initial guess for spatial extent in simple fitting = 0.40"
[Mon Jan 23 14:29:21 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.873
[Mon Jan 23 14:29:21 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 0.40"
[Mon Jan 23 14:43:12 2012] fullrun_ccd3_acisf10551_pi14-548_cl_pass1_src12.ximg exists
[Mon Jan 23 14:43:12 2012] Warning: total counts is not > 0
[Mon Jan 23 14:43:12 2012] fullrun_ccd3_acisf10551_pi14-548_cl_pass1_src12_1.ximg exists
[Mon Jan 23 14:43:12 2012] Warning: total counts is not > 0
[Mon Jan 23 14:43:12 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10551_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10551_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 14:43:12 2012] fullrun_ccd3_acisf10551_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Mon Jan 23 14:43:12 2012] Warning: total counts is not > 0
[Mon Jan 23 14:43:12 2012] fullrun_ccd3_acisf10551_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Mon Jan 23 14:43:12 2012] Warning: total counts is not > 0
[Mon Jan 23 14:43:12 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10551_pi14-548_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10551_pi14-548_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 15:09:46 2012] Source 17 appears to have -ve number of counts, which is not physical
Fit may be corrupt, not incorporating results
[Mon Jan 23 15:09:47 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 15:09:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 15:09:47 2012] Assessing source extent using major
[Mon Jan 23 15:09:47 2012] Source does appear to be extended
[Mon Jan 23 15:09:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 15:20:24 2012] Writing source region out to fullrun_ccd3_acisf10551_pi14-548_pass1_cl_src17_src.reg
[Mon Jan 23 15:20:24 2012] Extracting stamp from image fullrun_ccd3_acisf10551_pi14-548_cl_sm2.00.img.gz, (802, 31) - (847, 76)
[Mon Jan 23 15:20:24 2012] Writing fullrun_ccd3_acisf10551_pi14-548_pass1_cl_src17.gif
[Mon Jan 23 15:23:31 2012] ../../acisf10551/products/events/fullrun_ccd3_acisf10551_pi14-548_pass1_cl_src17_src.evt.gz[events] does not have any counts, not extracting products.
[Mon Jan 23 15:24:33 2012] No arf file found
[Mon Jan 23 15:25:47 2012] Updating aperture counts using extracted products
[Mon Jan 23 15:25:47 2012] Error reading totcts from fullrun_ccd3_acisf10551_pi14-548_pass1_cl_src17_src.pi
[Mon Jan 23 15:25:47 2012] No arf file for this source, not re-computing flux
[Mon Jan 23 15:25:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jan 23 15:25:54 2012] acisf10551/analysis//spectral/fullrun_ccd3_acisf10551_pi14-548_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete